The goal of this PhD thesis is to investigate possibilities of using symbol elimination for solving problems over complex theories and analyze the applicability of such uniform approaches in different areas of application, such as verification, knowledge representation and graph theory. In the thesis we propose an approach to symbol elimination in complex theories that follows the general idea of combining hierarchical reasoning with symbol elimination in standard theories. We analyze how this general approach can be specialized and used in different areas of application. In the verification of parametric systems it is important to prove that certain safety properties hold. This can be done by showing that a property is an inductive invariant of the system, i.e. it holds in the initial state of the system and is invariant under updates of the system. Sometimes this is not the case for the condition itself, but for a stronger condition it is. In this thesis we propose a method for goal-directed invariant strengthening. In knowledge representation we often have to deal with huge ontologies. Combining two ontologies usually leads to new consequences, some of which may be false or undesired. We are interested in finding explanations for such unwanted consequences. For this we propose a method for computing interpolants in the description logics EL and EL⁺, based on a translation to the theory of semilattices with monotone operators and a certain form of interpolation in this theory. In wireless network theory one often deals with classes of geometric graphs in which the existence or non-existence of an edge between two vertices in a graph relies on properties on their distances to other nodes. One possibility to prove properties of those graphs or to analyze relations between the graph classes is to prove or disprove that one graph class is contained in the other. In this thesis we propose a method for checking inclusions between geometric graph classes.

Well-being is essential for all people. Therefore, important factors influencing people’s well-being must be investigated. Well-being is multifaceted and defined as, for example, psychological, emotional, mental, physical, or social well-being. Here, we focus on psychological well-being. The study aimed to analyze different aspects of connectedness as potential predictors of psychological well-being. For this purpose, we conducted a study examining the psychological well-being of 184 participants (130 women, 54 men, age: M = 31.39, SD = 15.24) as well as their connectedness with oneself (self-love), with others (prosocialness), with nature (nature connectedness), and with the transcendent (spirituality). First, significant positive correlations appeared between psychological well-being and self-love, nature connectedness, and spirituality. Furthermore, correlations between the four aspects of connectedness were significant, except for the relationship between self-love and prosocialness. A regression analysis revealed that self-love and nature connectedness positively predicted participants’ psychological well-being, while spirituality and prosocialness did not explain any incremental variance. The strong relationship between self-love and well-being was partly mediated by nature connectedness. Hence, self love, understood as a positive attitude of self-kindness, should be considered in more detail to enhance psychological well-being. Besides this, a more vital connectedness to the surrounding nature could benefit people’s well-being.

The biodegradable polymers polylactic acid (PLA) and polyhydroxybutyrate (PHB) produced from renewable raw materials were coated with hydrogenated amorphous carbon layers (a-C:H) at different deposition angles with various thicknesses as part of this thesis. Similar to conventional polymers, biopolymers often have unsuitable surface properties for industrial purposes, e.g. low hardness. For some applications, it is therefore necessary and advantageous to modify the surface properties of biopolymers while retaining the main properties of the substrate material. A suitable surface modification is the deposition of thin a-C:H layers. Their properties depend essentially on the sp² and sp³ hybridization ratio of the carbon atoms and the content of hydrogen atoms. The sp²/sp³ ratio was to be controlled in the present work by varying the coating geometry. Since coatings at 0°, directly in front of the plasma source, contain a higher percentage of sp³ and indirectly coated (180°) a higher amount of sp², it is shown in this work that it is possible to control the sp²/sp³ ratio. For this purpose, the samples are placed in front of the plasma source at angles of 0, 30, 60, 90, 120, 150 and 180° and coated for 2.5, 5.0, 7.5 and 10.0 minutes. For the angles 0°, the layer thicknesses were 25, 50, 75 and 100 nm. The a-C:H layers were all deposited using radio-frequency plasma-enhanced chemical vapor deposition and acetylene as C and H sources after being pretreated with an oxygen plasma for 10 minutes. Following the O₂ treatment and the a-C:H deposition, the surfaces are examined using macroscopic and microscopic measurement methods and the data is then analyzed. The surface morphology is recorded using scanning electron microscopy and atomic force microscopy. In addition, data on the stability of the layer and the surface roughness can be collected. Contact angle (CA) measurements are used to determine not only the wettability, but also the contact angle hysteresis by pumping the drop volume up and down. By measuring the CA with different liquids and comparing them, the surface free energy (SFE) and its polar and disperse components are determined. The changes in barrier properties are verified by water vapor transmission rate tests (WVTR). The chemical analysis of the surface is carried out on the one hand by Fourier transform infrared spectroscopy with specular reflection and on the other hand by synchrotron-supported techniques such as near-edge X-ray absorption fine structure and X-ray photoelectron spectroscopy. When analyzing the surfaces after the O₂ treatment, which was initially assumed to serve only to clean and activate the surface for the a-C:H coating, it was found that the changes were more drastic than originally assumed. For example, if PLA is treated at 0° for 10 minutes, the roughness increases fivefold. As the angle increases, it decreases again until it returns to the initial value at 180°. This can be recognized to a lesser extent with PHB at 30°. For both polymers, it can be shown that the polar fraction of the SFE increases. In the WVTR, a decrease in permeability can be observed for PLA and an increase in the initial value for PHB. The chemical surface analysis shows that the O₂ treatment has little effect on the surface bonds. Overall, it can be shown in this work that the O₂ treatment has an effect on the properties of the surface and cannot be regarded exclusively as a cleaning and activation process. With direct a-C:H coating (at 0°), a layer failure due to internal stress can be observed for both PLA and PHB. This also occurs with PHB at 30°, but to a lesser extent. Permeability of the polymers is reduced by 47% with a five-minute coating and the layer at 10.0 minutes continues to have this effect despite cracks appearing. The application of a-C:H layers shows a dominance of sp³ bonds for both polymer types with direct coating. This decreases with increasing angle and sp² bonds become dominant for indirect coatings. This result is similar for all coating thicknesses, only the angle at which the change of the dominant bond takes place is different. It is shown that it is possible to control the surface properties by an angle-dependent coating and thus to control the ratio sp²/sp³.

The title compound, [Fe(C5H5)(C21H24NO2)], which is produced by the oxidation of 1-(4-tert-butylphenyl)-2-ethyl-3-ferrocenylpyrrole, crystallizes as a racemic mixture in the centrosymmetric space group P21/n. The central heterocyclic pyrrole ring system subtends dihedral angles of 13.7 (2)° with respect to the attached cyclopentadienyl ring and of 43.6 (7)° with the major component of the disordered phenyl group bound to the N atom. The 4-tert-butylphenyl group, as well as the non-substituted Cp ring are disordered with s.o.f. values of 0.589 (16) and 0.411 (16), respectively. In the crystal, molecules with the same absolute configuration are linked into infinite chains along the b-axis direction by O—H···O hydrogen bonds between the hydroxy substituent and the carbonyl O atom of the adjacent molecule.

How to begin? This short question addresses a problem that is anything but simple, especially when regarding something as sophisticated and multilayered as musical theatre. However, scholars of this vast research area have mostly neglected this question so far. This study analyses and compares the initial sections of late Victorian popular musical theatre and is therefore a contribution to several fields of research: the analysis of initial sections of musical theatre in general, the analysis of the music of popular musical theatre in particular, and therefore operetta studies. The 1890s are especially interesting times for popular musical theatre in London: The premiered works include the last collaborations of Gilbert and Sullivan as well as offshoots of Savoy opera; but the so-called ‘naughty nineties’ also saw the emergence of a new genre, musical comedy, which captured the late Victorian zeitgeist like no other. This new form of theatrical entertainment was carefully and consciously constructed and promoted as modern and fashionable, walking a fine line between respectability and mildly risqué excitement. Because a deep understanding of the developments and new tendencies concerning popular musical theatre in the 1890s is crucial in order to interpret differences as well as similarities, the analyses of the opening numbers are preceded by a detailed discussion of the relevant genres: comic opera, musical comedy, musical play and operetta. Since the producers of the analysed works wanted to distance themselves from former and supposedly old-fashioned traditions, this book also considers influences from their British predecessors, but also from Viennese operetta and French opéra bouffe.

The production of isolated metallic nanoparticles with multifunctionalized properties, such as size and shape, is crucial for biomedical, photocatalytic, and energy storage or remediation applications. This study investigates the initial particle formations of gold nanoparticles (AuNPs) bioproduced in the cyanobacteria Anabaena sp. using high-resolution transmission electron microscopy images for digital image analysis. The developed method enabled the discovery of cerium nanoparticles (CeNPs), which were biosynthesized in the cyanobacteria Calothrix desertica. The particle size distributions for AuNPs and CeNPs were analyzed. After 10 h, the average equivalent circular diameter for AuNPs was 4.8 nm, while for CeNPs, it was approximately 5.2 nm after 25 h. The initial shape of AuNPs was sub-round to round, while the shape of CeNPs was more roundish due to their amorphous structure and formation restricted to heterocysts. The local PSDs indicate that the maturation of AuNPs begins in the middle of vegetative cells and near the cell membrane, compared to the other regions of the cell.

This thesis explores and examines the effectiveness and efficacy of traditional machine learning (ML), advanced neural networks (NN) and state-of-the-art deep learning (DL) models for identifying mental distress indicators from the social media discourses based on Reddit and Twitter as they are immensely used by teenagers. Different NLP vectorization techniques like TF-IDF, Word2Vec, GloVe, and BERT embeddings are employed with ML models such as Decision Tree (DT), Random Forest (RF), Logistic Regression (LR) and Support Vector Machine (SVM) followed by NN models such as Convolutional Neural Network (CNN), Recurrent Neural Network (RNN) and Long Short-Term Memory (LSTM) to methodically analyse their impact as feature representation of models. DL models such as BERT, DistilBERT, MentalRoBERTa and MentalBERT are end-to-end fine tuned for classification task. This thesis also compares different text preprocessing techniques such as tokenization, stopword removal and lemmatization to assess their impact on model performance. Systematic experiments with different configuration of vectorization and preprocessing techniques in accordance with different model types and categories have been implemented to find the most effective configurations and to gauge the strengths, limitations, and capability to detect and interpret the mental distress indicators from the text. The results analysis reveals that MentalBERT DL model significantly outperformed all other model types and categories due to its specific pretraining on mental data as well as rigorous end-to-end fine tuning gave it an edge for detecting nuanced linguistic mental distress indicators from the complex contextual textual corpus. This insights from the results acknowledges the ML and NLP technologies high potential for developing complex AI systems for its intervention in the domain of mental health analysis. This thesis lays the foundation and directs the future work demonstrating the need for collaborative approach of different domain experts as well as to explore next generational large language models to develop robust and clinically approved mental health AI systems.

Focusing on the triangulation of detective fiction, masculinity studies and disability studies, "Investigating the Disabled Detective – Disabled Masculinity and Masculine Disability in Contemporary Detective Fiction" shows that disability challenges common ideals of (hegemonic) masculinity as represented in detective fiction. After a theoretical introduction to the relevant focal points of the three research fields, the dissertation demonstrates that even the archetypal detectives Dupin and Holmes undermine certain nineteenth-century masculine ideals with their peculiarities. Shifting to contemporary detective fiction and adopting a literary disability studies perspective, the dissertation investigates how male detectives with a form of neurodiversity or a physical impairment negotiate their masculine identity in light of their disability in private and professional contexts. It argues that the occupation as a detective supports the disabled investigator to achieve ‘masculine disability’. Inversing the term ‘disabled masculinity’, predominantly used in research, ‘masculine disability’ introduces a decisively gendered reading of neurodiversity and (acquired) physical impairment in contemporary detective fiction. The term implies that the disabled detective (re)negotiates his masculine identity by implementing the disability in his professional investigations and accepting it as an important, yet not defining, characteristic of his (gender) identity. By applying this approach to five novels from contemporary British and American detective fiction, the dissertation demonstrates that masculinity and disability do not negate each other, as commonly assumed. Instead, it emphasises that disability allows the detective, as much as the reader, to rethink masculinity.

In the last years, the public interest in epidemiology and mathematical modeling of disease spread has increased - mainly caused by the COVID-19 pandemic, which has emphasized the urgent need for accurate and timely modelling of disease transmission. However, even prior to that, mathematical modelling has been used for describing the dynamics and spread of infectious diseases, which is vital for developing effective interventions and controls, e.g., for vaccination campaigns and social restrictions like lockdowns. The forecasts and evaluations provided by these models influence political actions and shape the measures implemented to contain the virus. This research contributes to the understanding and control of disease spread, specifically for Dengue fever and COVID-19, making use of mathematical models and various data analysis techniques. The mathematical foundations of epidemiological modelling, as well as several concepts for spatio-temporal diffusion like ordinary differential equation (ODE) models, are presented, as well as an originally human-vector model for Dengue fever, and the standard (SEIR)-model (with the potential inclusion of an equation for deceased persons), which are suited for the description of COVID-19. Additionally, multi-compartment models, fractional diffusion models, partial differential equations (PDE) models, and integro-differential models are used to describe spatial propagation of the diseases. We will make use of different optimization techniques to adapt the models to medical data and estimate the relevant parameters or finding optimal control techniques for containing diseases using both Metropolis and Lagrangian methods. Reasonable estimates for the unknown parameters are found, especially in initial stages of pandemics, when little to no information is available and the majority of the population has not got in contact with the disease. The longer a disease is present, the more complex the modelling gets and more things (vaccination, different types, etc.) appear and reduce the estimation and prediction quality of the mathematical models. While it is possible to create highly complex models with numerous equations and parameters, such an approach presents several challenges, including difficulties in comparing and evaluating data, increased risk of overfitting, and reduced generalizability. Therefore, we will also consider criteria for model selection based on fit and complexity as well as the sensitivity of the model with respect to specific parameters. This also gives valuable information on which political interventions should be more emphasized for possible variations of parameter values. Furthermore, the presented models, particularly the optimization using the Metropolis algorithm for parameter estimation, are compared with other established methods. The quality of model calculation, as well as computational effort and applicability, play a role in this comparison. Additionally, the spatial integro-differential model is compared with an established agent-based model. Since the macroscopic results align very well, the computationally faster integro-differential model can now be used as a proxy for the slower and non-traditionally optimizable agent-based model, e.g., in order to find an apt control strategy.

Leichte Sprache (LS, easy-to-read German) is a simplified variety of German. It is used to provide barrier-free texts for a broad spectrum of people, including lowliterate individuals with learning difficulties, intellectual or developmental disabilities (IDD) and/or complex communication needs (CCN). In general, LS authors are proficient in standard German and do not belong to the aforementioned group of people. Our goal is to empower the latter to participate in written discourse themselves. This requires a special writing system whose linguistic support and ergonomic software design meet the target group’s specific needs. We present EasyTalk a system profoundly based on natural language processing (NLP) for assistive writing in an extended variant of LS (ELS). EasyTalk provides users with a personal vocabulary underpinned with customizable communication symbols and supports in writing at their individual level of proficiency through interactive user guidance. The system minimizes the grammatical knowledge needed to produce correct and coherent complex contents by intuitively formulating linguistic decisions. It provides easy dialogs for selecting options from a natural-language paraphrase generator, which provides context-sensitive suggestions for sentence components and correctly inflected word forms. In addition, EasyTalk reminds users to add text elements that enhance text comprehensibility in terms of audience design (e.g., time and place of an event) and improve text coherence (e.g., explicit connectors to express discourse-relations). To tailor the system to the needs of the target group, the development of EasyTalk followed the principles of human-centered design (HCD). Accordingly, we matured the system in iterative development cycles, combined with purposeful evaluations of specific aspects conducted with expert groups from the fields of CCN, LS, and IT, as well as L2 learners of the German language. In a final case study, members of the target audience tested the system in free writing sessions. The study confirmed that adults with IDD and/or CCN who have low reading, writing, and computer skills can write their own personal texts in ELS using EasyTalk. The positive feedback from all tests inspires future long-term studies with EasyTalk and further development of this prototypical system, such as the implementation of a so-called Schreibwerkstatt (writing workshop)

The trends of industry 4.0 and the further enhancements toward an ever changing factory lead to more mobility and flexibility on the factory floor. With that higher need of mobility and flexibility the requirements on wireless communication rise. A key requirement in that setting is the demand for wireless Ultra-Reliability and Low Latency Communication (URLLC). Example use cases therefore are cooperative Automated Guided Vehicles (AGVs) and mobile robotics in general. Working along that setting this thesis provides insights regarding the whole network stack. Thereby, the focus is always on industrial applications. Starting on the physical layer, extensive measurements from 2 GHz to 6 GHz on the factory floor are performed. The raw data is published and analyzed. Based on that data an improved Saleh-Valenzuela (SV) model is provided. As ad-hoc networks are highly depended onnode mobility, the mobility of AGVs is modeled. Additionally, Nodal Encounter Patterns (NEPs) are recorded and analyzed. A method to record NEP is illustrated. The performance by means of latency and reliability are key parameters from an application perspective. Thus, measurements of those two parameters in factory environments are performed using Wireless Local Area Network (WLAN) (IEEE 802.11n), private Long Term Evolution (pLTE) and 5G. This showed auto-correlated latency values. Hence, a method to construct confidence intervals based on auto-correlated data containing rare events is developed. Subsequently, four performance improvements for wireless networks on the factory floor are proposed. Of those optimization three cover ad-hoc networks, two deal with safety relevant communication, one orchestrates the usage of two orthogonal networks and lastly one optimizes the usage of information within cellular networks. Finally, this thesis is concluded by an outlook toward open research questions. This includes open questions remaining in the context of industry 4.0 and further the ones around 6G. Along the research topics of 6G the two most relevant topics concern the ideas of a network of networks and overcoming best-effort IP.

Counts of SARS-CoV-2-related deaths have been key numbers for justifying severe political, social and economical measures imposed by authorities world-wide. A particular focus thereby was the concomitant excess mortality (EM), i.e. fatalities above the expected all-cause mortality (AM). Recent studies, inter alia by the WHO, estimated the SARS-CoV-2-related EM in Germany between 2020 and 2021 as high as 200 000. In this study, we attempt to scrutinize these numbers by putting them into the context of German AM since the year 2000. We propose two straightforward, age-cohort-dependent models to estimate German AM for the ‘Corona pandemic’ years, as well as the corresponding flu seasons, out of historic data. For Germany, we find overall negative EM of about −18 500 persons for the year 2020, and a minor positive EM of about 7000 for 2021, unveiling that officially reported EM counts are an exaggeration. In 2022, the EM count is about 41 200. Further, based on NAA-test-positive related death counts, we are able to estimate how many Germans have died due to rather than with CoViD-19; an analysis not provided by the appropriate authority, the RKI. Through 2020 and 2021 combined, our due estimate is at no more than 59 500. Varying NAA test strategies heavily obscured SARS-CoV-2-related EM, particularly within the second year of the proclaimed pandemic. We compensated changes in test strategies by assuming that age-cohort-specific NAA-conditional mortality rates during the first pandemic year reflected SARS-CoV-2-characteristic constants.

Increasingly, problematic smartphone use behavior (PSU) and excessive consumption are reported. In this study, an experiment was developed to investigate the influence of screen coloration using the grayscale setting on smartphone usage time in repeated measurements. We also investigated how individuals perceived suffering correlates with smartphone usage time and PSU, and whether differences exist by smartphone usage type (social, process, habitual). 240 subjects completed a questionnaire about smartphone usage time, PSU, perceived suffering, and smartphone usage types. Afterward, their smartphones were switched to grayscale setting for at least 24h, and thereafter 92 of these participants completed the second questionnaire. Analyses showed that grayscale setting decreases usage time and that there is a positive correlation between PSU, smartphone usage duration, and perceived suffering. The types of use (process and habitual) influence one’s perceived suffering. Thus, it shows that individuals are aware of their PSU and suffer from it. Using grayscale setting is effective in reducing smartphone use time.

Digital transformation is a prevailing trend in the world, especially in dynamic Asia. Vietnam has recorded remarkable changes in the economy as domestic enterprises have made new strides in the digital transformation process. MB Bank, one of the prestigious financial groups in Vietnam, also takes advantage of digital transformation to have the opportunity to break through to become a large-scale technology enterprise with many factors such as improving customer experience, increasing customer base and increasing customer satisfaction. enhance competitiveness, build trust and loyalty for customers. However, in the process of converting MB, there are also many challenges that require banks to have appropriate policies to handle. It can be said that MB Bank is a typical case study of digital transformation in the banking sector in Vietnam.

FinTech is deemed to be an underexplored phenomenon even in academic and real environments. Among (1) “Sustainable FinTech” – the application of information technology as innovation in established financial services providers’ business operation; and (2) “Disruptive FinTech” – the provision of financial products and services by non-incumbents which in most cases are information technology entrepreneurs, the former receives more attention. In order to contribute to Disruptive FinTech category, the thesis strive to examine Entrepreneurial Strategy framework applied for technology players taking part in Vietnam financial market.

The paper is a study focusing on exploring which factors and examining the impact of those factors influencing the entrepreneurial intention among students in the Construction industry, specifically among students of Hanoi Construction University and Hanoi Architecture University. The study also mentions some solution of this findings for entrepreneurship in the Construction field in Vietnam that the author might think of based on this research work for future study. The Theory of planned behavior is used as the theoritical framework for this study. Both qualitative and quantitative methods are employed. The questionaire will be conducted among students of the two universities mentioned above. Then, an exploratory factor analysis (EFA) will performed to test the validity of the constructs. The research findings provide factors and their impact factors influencing the entrepreneurial intention and propose some solutions to improve the entrepreneurship in the Construction field in Vietnam.

Predictive Process Monitoring is becoming more prevalent as an aid for organizations to support their operational processes. However, most software applications available today require extensive technical know-how by the operator and are therefore not suitable for most real-world scenarios. Therefore, this work presents a prototype implementation of a Predictive Process Monitoring dashboard in the form of a web application. The system is based on the PPM Camunda Plugin presented by Bartmann et al. (2021) and allows users to easily create metrics, visualizations to display these metrics, and dashboards in which visualizations can be arranged. A usability test is with test users of different computer skills is conducted to confirm the application’s user-friendliness.

The diversity within amphibian communities in cultivated areas in Rwanda and within two selected, taxonomically challenging groups, the genera Ptychadena and Hyperolius, were investigated in this thesis. The amphibian community of an agricultural wetland near Butare in southern Rwanda comprised 15 anuran species. Rarefaction and jackknife analyses corroborated that the complete current species richness of the assemblage had been recorded, and the results of acoustic niche analysis suggested species saturation of the community. Surveys at many other Rwandan localities showed that the species recorded in Butare are widespread in cultivated and pristine wetlands. The species were readily distinguishable using morphological, bioacoustic, and molecular (DNA barcoding) features, but only eight of the 15 species could be assigned unambiguously to nominal species. The remaining represented undescribed or currently unrecognized taxa, including three species of Hyperolius, two Phrynobatrachus species, one Ptychadena species, and one species of Amietia. The diversity of the Ridged Frogs in Rwanda was investigated in two studies (Chapters III and IV). Three species of Ptychadena were recorded in wetlands in the catchment of the Nile. They can be distinguished by morphological characters (morphometrics and qualitative features) as well as by their advertisement calls and genetics. The Rwandan species of the P. mascareniensis group was shown to differ from the topotypic population as well as from other genetic lineages in sub-Saharan Africa and an old available name, P. nilotica, was resurrected from synonymy for this lineage. Two further Ptychadena species were identified among voucher specimens from Rwanda deposited in the collection of the RMCA, P. chrysogaster and P. uzungwensis. Morphologically they can be unambiguously distinguished from each other and the three other Rwandan species. A key based on qualitative morphological characters was developed, which allows unequivocal identification of specimens of all species that have been recorded from Rwanda. DNA was isolated from a Rwandan voucher specimen of P. chrysogaster, and the genetic analysis corroborated the species" distinct status. A species of Hyperolius collected in the Nyungwe National Park was compared to all other Rwandan species of the genus and to morphologically or genetically similar species from neighbouring countries. Its distinct taxonomic status was justified by morphological, bioacoustic, and molecular evidence and it was described as a new species, H. jackie. A species of the H. nasutus group collected at agricultural sites in Rwanda was described as a new species in the course of a revision of the species of the Hyperolius nasutus group. The group was shown to consist of 15 distinct species which can be distinguished from each other genetically, bioacoustically, and morphologically. The aerial performance, i.e. parachuting, of the Disc-fingered Reed Frog, Hyperolius discodactylus, was described. It represents a novel observation of a behaviour that has been known from a number of Southeast Asian and Neotropical frog species. Parachuting frogs, including H. discodactylus, exhibit certain morphological characteristics and, while airborne, assume a distinct posture which is best-suited for maneuvering in the air. Another study on the species addressed the validity of the taxon H. alticola which had been considered either a synonym of H. discodactylus or a distinct species. Type material of both taxa was re-examined and the status of H. alticola reassessed using morphological data from historic and new collections, call recordings, and molecular data from animals collected on recent expeditions. A northern and a southern genetic clade were identified, a divide that is weakly supported by diverging morphology of the vouchers from the respective localities. No distinction in advertisement call features could be recovered to support this split and both genetic and morphological differences between the two geographic clades are marginal and not always congruent and more likely reflect population-level variation. Therefore it was concluded that H. alticola is not a valid taxon and should be treated as a synonym of H. discodactylus.

In the last decades, it became evident that the world is facing an unprecedented, human-induced global biodiversity crisis with amphibians being one of the most threatened species groups. About 41% of the amphibian species are classified as endangered by the IUCN, but even in amphibian species that are listed as "least concern", population declines can be observed on a local level. With land-use change and agrochemicals (i.e. pesticides), two of the main drivers for this amphibian decline are directly linked to intensive agriculture, which is the dominant landscape type in large parts of Europe. Thus, understanding the situation of amphibians in the agricultural landscape is crucial for conservation measures. In the present thesis, I investigated the effects of viticulture on amphibian populations around Landau in der Pfalz (Germany) in terms of habitat use, pesticide exposure, biometric traits as well as genetic and age structure. From the perspective of amphibians, land-use change means usually the destruction of habitats in agricultural landscapes, which often leads to landscape fragmentation. Thus, I followed the question if also vineyards lead to the fragmentation of the landscape and if pesticides that are frequently used in viticulture have to be considered as a factor too, so if there is a chemical landscape fragmentation. Using telemetry, I could show that common toads (Bufo bufo) can be found directly in vineyards, but that they tend to avoid them as habitat. Analysing the genetic structure of common frogs (Rana temporaria) revealed that vineyards have to be considered as a barrier for amphibians. To identify if pesticides contribute to the resulting landscape fragmentation, I conducted an arena choice experiment in the laboratory in which I found evidence for an avoidance of pesticide-contaminated soil. Such an avoidance could be one of the underlying reasons for a potential chemical landscape fragmentation. By combining telemetry data with information about pesticide applications from local wine growers, I could show that a large part of the common toads is likely to come in contact with pesticides. Further, I demonstrated that the agricultural landscape, probably due to the application of pesticides, can have negative effects on the reproduction capacity of common toads. By studying palmate newts (Lissotriton helveticus) I found that adult newts from agricultural ponds are smaller than those from forest ponds. As I did not find differences in the age structure and growth, these differences might be carry-over effects from earlier life stages. While agricultural ponds might be suitable habitats for adult palmate newts, the potential carry-over effect indicates suboptimal conditions for larvae and/or juveniles. I conclude that the best management measure for sustaining amphibians in the agricultural landscape would be a heterogeneous cultural landscape with a mosaic of different habitat patches that work without or at least a reduced amount of pesticides. Green corridors between populations and different habitats would allow migrating individuals to avoid agricultural and thus pesticide-contaminated areas. This would reduce the pesticide exposure risk of amphibians, while preventing the fragmentation of the landscape and thus the isolation of populations.

This thesis was motivated by the need to advance the knowledge on the variability and dynamics of energy fluxes in lakes and reservoirs, as well as about the physical processes that regulate the fluxes at both the air and water side of the air-water interface. In the first part, I re-examine how mechanical energy, resulting from its major source – the vertical wind energy flux - distributes into the various types of water motions, including turbulent flows and surface and internal waves. Although only a small fraction of the wind energy flux from the atmosphere is transferred to the water, it is crucial for physical, biogeochemical and ecological processes in lentic ecosystems. Based on extensive air- and water-side measurements collected at two small water bodies (< 10 km2), we estimated the energy fluxes and energy content in surface and in internal waves. Overall, the estimated energy fluxes and energy content agree well with results reported for larger water bodies, suggesting that the energetics driving the water motions in enclosed basins is similar, independently of the basin size. Our findings highlight the importance of the surface waves that receive the largest fraction of the wind energy flux, which strongly nonlinearly increases for wind speeds exceeding 3 m s-1. We found that the existing parameterization of the wave height as a function of wind speed and fetch length did not reproduce the measured wave amplitude in lakes. On average, the highest energy content was observed in basin-scale internal waves, together with high-frequency internal waves exhibiting seasonal variability and varies among the aquatic systems. During our analysis, we discovered the diurnal variability of the energy dissipation rates in the studied lake, suggesting biogenic turbulence generation, which appears to be a widespread phenomenon in lakes and reservoirs. In the second part of the thesis, I addressed current knowledge gaps related to the bulk transfer coefficients (also known as the drag coefficient, the Stanton number and the Dalton number), which are of a particular importance for the bulk estimation of the surface turbulent fluxes of momentum, sensible and latent heat in the atmospheric boundary layer. Their inaccurate representation may lead to significant errors in flux estimates, affecting, for example, the weather and climate predictions or estimations of the near-surface current velocities in lake hydrodynamic models. Although the bulk transfer coefficients have been extensively studied over the past several decades (mainly in marine and large-lake environments), there has been no systematic analysis of measurements obtained at lakes of different size. A significant increase of the transfer coefficients at low wind speeds (< 3 m s-1) has been observed in several studies, but, to date, it has remained unexplained. We evaluated the bulk transfer coefficients using flux measurements from 31 lakes and reservoirs. The estimates were generally within the range reported in previous studies for large lakes and oceans. All transfer coefficients increased substantially at low wind speeds, which was found to be associated with the presence of gusts and capillary waves (except the Dalton number). We found that the Stanton number is systematically higher than the Dalton number. This challenges the assumption made in the Bowen-ratio method, which is widely used for estimating evaporation rates from micrometeorological measurements. We found that the variability of the transfer coefficients among the lakes could be associated with lake surface area. In flux parameterizations at lake surfaces, it is recommended to consider variations in the drag coefficient and the Stanton number due to wind gustiness and capillary wave roughness while the Dalton number could be considered as constant at all wind speeds. In the third part of the thesis, I address the key drivers of the near-surface turbulence that control the gas exchange in a large regulated river. As all inland waters, rivers are an important natural source of greenhouse gases. The effects of the widespread alteration and regulation of river flow for human demands on gas exchange is largely unknown. In particular, the near-surface turbulence in regulated rivers has been rarely measured and its drivers have not been identified. While in lakes and reservoirs, near-surface turbulence is mainly related to atmospheric forcing, in shallow rivers and streams it is generated by bottom friction of the gravity-forced flow. The studied large regulated river represents a transition between these two cases. Atmospheric forcing and gravity were the dominant drivers of the near-surface turbulence for a similar fraction of the measurement period. Based on validated scalings, we derived a simple model for estimating the relative contributions of wind and bottom friction to near-surface turbulence in lotic ecosystems with different flow depths. Large diel variability in the near-surface energy dissipation rates due to flow regulation leads to the same variability in gas exchange. This suggests that estimates of gas fluxes from rivers are biased by measurements performed predominantly during daytime. In addition, the novelty in all the analyses described above is the use of the turbulent surface fluxes measured directly by the eddy-covariance technique – at the moment of writing, the most advanced method. Overall, this thesis is of a potential interest for a broad range of scientific disciplines, including limnology, micrometeorology and open channel hydraulics.

This study was conducted in Nyungwe National Park (NNP); a biodiversity hotspot Mountain rainforest of high conservation importance in Central Africa, but with little knowledge of its insect communities including butterflies, good indicators of climate change, and forest ecosystem health. The study aimed at availing baseline data on butterfly species diversity and distribution in NNP, for future use in monitoring climate change-driven shifts and the effects of forest fragmentation on the biodiversity of Nyungwe. Butterflies were collected seasonally using fruit-baited traps and hand nets along elevational transects spanning from 1700 m up to 2950 m of altitude. Two hundred forty-two species including 28 endemics to the Albertine Rift and 18 potential local climate change indicators were documented. Species richness and abundance declined with increasing elevation and higher seasonal occurrence was observed during the dry season. This was the first study on the spatial and temporal distribution of butterflies in NNP and further studies could be conducted to add more species and allow a depth understanding of the ecology of Nyungwe butterflies.

Manmade dams have been constructed from centuries for multiple purposes, and in the past decades they have been constructed in a fast pace, with the hotspot in tropical and subtropical regions. However, studies that explore hydrodynamics in these areas are scarce and biased to the rich literature available for temperate regions. Lakes and reservoirs have the same controlling mechanisms for physical processes and primary production, hence, analyses that were initially conceptualized for lakes are frequently applied for reservoirs. Nevertheless, longitudinal gradients in reservoirs challenges the application of these approaches. Degradation of water quality in reservoirs is a major concern, and it is expected to be aggravated with climate change. Therefore, studies that explore mechanisms controlling water quality are essential for the maintenance of these systems, especially in tropical and subtropical regions. The aim of this thesis is to comprehend the role of hydrodynamic processes in the fate of nutrients in reservoirs and its implications on water quality, in a subtropical region. With focus on the relevance of different density current patterns. For that, analyses combining field measurements and numerical simulations were performed in a medium to small size subtropical drinking water reservoir for a complete seasonal cycle. Measurements were conducted combining several approaches: traditional sampling, sensors in high temporal and spatial resolution, and remote sensing. Besides, hydrodynamic models were set up and calibrated to reproduce observations, and to simulate scenarios that assisted on the analysis. Results showed that different flow paths of density currents did not influence on phytoplankton dynamics. At the regions where the main nutrient supply was the river inflow (upstream), the density currents did not vary, the euphotic zone usually covered the entire depth, and vertical mixing was observed on a daily basis, turning the flow path of the density currents irrelevant. At downstream regions, the remobilization of nutrients in the sediment was the main source for primary production. Even though density currents had a seasonal pattern in the downstream region, thermal stratification conditions were the driver for variations in chlorophyll-a concentrations, with peaks after vertical mixing. This mechanism had in its favor the frequent anoxic conditions in the hypolimnion that enhanced the dissolution of reactive phosphorus from the sediment. Anoxic conditions were easily reached because the sediment in the downstream area was rich in organic matter. Phytoplankton produced in the upstream area was transported by the density currents, and for this reason, large concentrations of chl-a was observed below the euphotic zone. Further, the extensive measurements of temperature, and flow velocities, together with the hydrodynamic models, provided insights about the hydrodynamics of reservoirs. For instance, that the relevant processes occurred along the longitudinal, and mixing conditions varied along it. The relevance of inflow conditions regarding the presence of structures such as forebays and pre-dams, and the degree of stream shading in the catchment was assessed. And turbulence and internal waves had different features than the documented for high latitudes. Those findings can assist on the management of reservoirs, based on the comprehension of the physical processes.

This dissertation is dedicated to a new concept for capturing renunciation-oriented attitudes and beliefs — sufficiency orientation. Sufficiency originates in the interdisciplinary sustain-ability debate. In contrast to efficiency and consistency, sufficiency considers human behaviour as the cause of socio-ecological crises and strives for a reduction in consumption respecting the planetary boundaries. The present work places sufficiency in a psychological research context and explores it qualitatively and quantitatively. On the basis of five manuscripts, the overarching question pursued is to what extent sufficiency orientation contributes to socio-ecological transformation. Based on one qualitative study and five further quantitative studies, sufficiency orientation is investigated in different behavioural contexts that are of particular importance with regard to CO2 emissions. In addition, sufficiency orientation is linked to a wider range of psychologically relevant theories that help gain an overview of correlates and possible causes for the development of a sufficiency orientation. Manuscript 1 uses expert interviews (N = 21) to develop a heuristic framework on a transformation towards societal sufficiency orientation including barriers and enablers, as well as ambiguities on such a change. The derived elements are interpreted in the light of the leverage points approach. This framework can serve as a heuristic for future research and to develop measures concerning sufficiency orientation. As part of an online study (N = 648), Manuscript 2 examines the extent to which sufficiency orientation can be embedded in classic models for explaining pro-environmental intentions and behaviour (Theory of Planned Behaviour, Norm Activation Model), and showed a significant contribution to the explanation of intentions and behaviour in the field of plastic consumption. Manuscript 3 reports two framing experiments (Study 1, N = 123, Study 2, N = 330) to investigate how pro-social justice sensitivity contributes to making sufficiency orientation more salient and promoting it. While sufficiency orientation and pro-social facets of justice sensitivity were positively related to each other, there was no effect of the framing intervention in the hypothesised direction. The results indicate that justice-related information at least in the presented manner is more likely to generate reactance. Manuscript 4 presents an online study (N = 317) and targets the importance of sufficiency orientation for predicting actual greenhouse gas emissions in relation to flight behav-iour and policy support for the decarbonisation of mobility. In addition, the connection between sufficiency orientation and global identity is examined. It turns out that sufficiency orientation is superior to global identity in predicting actual emissions and decarbonisation policies. Contrary to expectations, sufficiency orientation and the form of global identity operationalised in the presented study shows a positive correlation and are compatible. Manuscript 5 reports a reflective diary intervention (N = 252) that should lead to a short- and long-term increase in sufficiency orientation by satisfying basic psychological needs through induced self-reflection. For both groups with or without the intervention, sufficiency orientation increased slightly but significantly. Although no specific effect of the manipulation was found, basic psychological need satisfaction turns out to be the largest predictor for sufficiency orientation. Subjective well-being is positively associated with sufficiency orientation, while time affluence shows no clear associations in the study. Overall, the results highlight the relevance of sufficiency orientation in relation to socio-ecological transformation and actual behavioural change. Sufficiency orientation is related to low-emission behaviour and support for political measures to decarbonize infrastructures. These results contribute to the discussion on the intention-behaviour gap in regard to impact-relevant behaviour, i.e. behaviour producing high emissions. The present findings suggest, that sufficiency orientation could be related to a strong intention-behavioural consistency. However, further research is needed to validate these results and improve the measurement of sufficiency orientation. Furthermore, the studies provided insights on correlates of sufficiency orientation: justice sensitivity, global identity, subjective well-being and left-wing liberal political ideologies are all found to be positively related to sufficiency orien-tation. Moreover, basic psychological need satisfaction was identified as a potential mechanism that can support the emergence of sufficiency orientation, however, causality remains unclear. From these findings, the work derives practical implications how to possibly strengthen sufficiency orientation on the micro, meso and macro levels of society. Taken together, the dissertation provides important insights into a new and still developing concept, and shows its connectivity to psychological theories. However, future research is required in order to grasp more precisely the complexity of sufficiency orientation and to understand origins and predictors of sufficiency orientation. This work contributes to the interdisciplinary debate on socio-ecological transformation and points out that sufficiency orientation can serve to a future worth living as being related to reduced consumption.

Objectives: Crayfish plague disease, caused by the oomycete pathogen Aphanomyces astaci represents one of the greatest risks for the biodiversity of the freshwater crayfish. This data article covers the de novo transcriptome assembly and annotation data of the noble crayfish and the marbled crayfish challenged with Ap. astaci. Following the controlled infection experiment (Francesconi et al. in Front Ecol Evol, 2021, https://doi.org/10.3389/fevo.2021.647037), we conducted a differential gene expression analysis described in (Boštjančić et al. in BMC Genom, 2022, https://doi.org/10.1186/s12864-022-08571-z) Data description: In total, 25 noble crayfish and 30 marbled crayfish were selected. Hepatopancreas tissue was isolated, followed by RNA sequencing using the Illumina NovaSeq 6000 platform. Raw data was checked for quality with FastQC, adapter and quality trimming were conducted using Trimmomatic followed by de novo assembly with Trinity. Assembly quality was assessed with BUSCO, at 93.30% and 93.98% completeness for the noble crayfish and the marbled crayfish, respectively. Transcripts were annotated using the Dammit! pipeline and assigned to KEGG pathways. Respective transcriptome and raw datasets may be reused as the reference transcriptome assemblies for future expression studies.

The decline of biodiversity can be observed worldwide and its consequences are alarming. It is therefore crucial that nature must be protected and, where possible, restored. A wide variety of different project options are possible. Yet in the context of limited availability of resources, the selection of the most efficient measures is increasingly important. For this purpose, there is still a lack of information. This pertains, as outlined in the next paragraph, in particular, to information at different scales of projects. Firstly, there is a lack of information on the concrete added value of biodiversity protection projects. Secondly, there is a lack of information on the actual impacts of such projects and on the costs and benefits associated with a project. Finally, there is a lack of information on the links between the design of a project, the associated framework conditions and the perception of specific impacts. This paper addresses this knowledge gap by providing more information on the three scales by means of three empirical studies on three different biodiversity protection projects in order to help optimize future projects. The first study “Assessing the trade-offs in more nature-friendly mosquito control in the Upper Rhine region” examines the added value of a more nature-friendly mosquito control in the Upper Rhine Valley of Germany using a contingent valuation method. Recent studies show that the widely used biocide Bti, which is used as the main mosquito control agent in many parts of the world, has more negative effects on nature than previously expected. However, it is not yet clear whether the population supports a more nature-friendly mosquito control, as such an adaptation could potentially lead to higher nuisance. This study attempts to answer this question by assessing the willingness to pay for an adapted mosquito control strategy that reduces the use of Bti, while maintaining nuisance protection within settlements. The results show that the majority of the surveyed population attaches a high value to a more nature-friendly mosquito control and is willing to accept a higher nuisance outside of the villages. The second study “Inner city river restoration projects: the role of project components for acceptance” examines the acceptance of a river restoration project in Rhineland-Palatinate, Germany. Despite much effort, many rivers worldwide are still in poor condition. Therefore, a rapid implementation of river restoration projects is of great importance. In this context, acceptance by society plays a fundamental role, however, the factors determining such acceptance are still poorly understood. In particular, the complex interplay between the acceptance or rejection of specific project components and the acceptance of the overall project require further exploration. This study addresses this knowledge gap by assessing the acceptance of the project, its various ecological and social components, and the perception of real and fictitious costs as well as the benefits of the components. Our findings demonstrate that while acceptance of the overall project is generally rather high, many respondents reject one or more of the project's components. Complementary social project components, like a playground, find less support than purely ecological components. Overall, our research shows that complementary components may increase or decrease acceptance of the overall project. We, furthermore, found that differences in the acceptance of the individual components depend on individual concerns, such as perceived flood risk, construction costs, expected noise and littering as well as the quality of communication, attachment to the site, and the age of the respondents. The third study “What determines preferences for semi-natural habitats in agrarian landscapes? A choice-modelling approach across two countries using attributes characterizing vegetation” investigates people's aesthetic preferences for semi-natural habitats in agricultural landscapes. The EU-Common Agricultural Policy promotes the introduction of woody and grassy semi-natural habitats (SNH) in agricultural landscapes. While the benefits of these structures in terms of regulating ecosystem services are already well understood, the effects of SNH on visual landscape quality is still not clear. This study investigates the factors determining people’s visual preferences in the context of grassy and woody SNH elements in Swiss and Hungarian landscapes using picture-based choice experiments. The results suggest that respondents’ choices strongly depend on specific vegetation characteristics that appear and disappear over the year. In particular, flowers as a source of colours and green vegetation as well as ordered structure and the proportion of uncovered soil in the picture play an important role regarding respondents’ aesthetic perceptions of the pictures. The three empirical studies can help to make future projects in the study areas of biodiversity protection more efficient. While this thesis highlights the importance of exploring biodiversity protection projects at different scales, further analyses of the different scales of biodiversity protection projects are needed to provide a sound basis to develop guidance on identifying the most efficient biodiversity protection projects.

Social networks are ubiquitous structures that we generate and enrich every-day while connecting with people through social media platforms, emails, and any other type of interaction. While these structures are intangible to us, they carry important information. For instance, the political leaning of our friends can be a proxy to identify our own political preferences. Similarly, the credit score of our friends can be decisive in the approval or rejection of our own loans. This explanatory power is being leveraged in public policy, business decision-making and scientific research because it helps machine learning techniques to make accurate predictions. However, these generalizations often benefit the majority of people who shape the general structure of the network, and put in disadvantage under-represented groups by limiting their resources and opportunities. Therefore it is crucial to first understand how social networks form to then verify to what extent their mechanisms of edge formation contribute to reinforce social inequalities in machine learning algorithms. To this end, in the first part of this thesis, I propose HopRank and Janus two methods to characterize the mechanisms of edge formation in real-world undirected social networks. HopRank is a model of information foraging on networks. Its key component is a biased random walker based on transition probabilities between k-hop neighborhoods. Janus is a Bayesian framework that allows to identify and rank plausible hypotheses of edge formation in cases where nodes possess additional information. In the second part of this thesis, I investigate the implications of these mechanisms - that explain edge formation in social networks - on machine learning. Specifically, I study the influence of homophily, preferential attachment, edge density, fraction of inorities, and the directionality of links on both performance and bias of collective classification, and on the visibility of minorities in top-k ranks. My findings demonstrate a strong correlation between network structure and machine learning outcomes. This suggests that systematic discrimination against certain people can be: (i) anticipated by the type of network, and (ii) mitigated by connecting strategically in the network.

Semantic Web technologies have been recognized to be key for the integration of distributed and heterogeneous data sources on the Web, as they provide means to define typed links between resources in a dynamic manner and following the principles of dataspaces. The widespread adoption of these technologies in the last years led to a large volume and variety of data sets published as machine-readable RDF data, that once linked constitute the so-called Web of Data. Given the large scale of the data, these links are typically generated by computational methods that given a set of RDF data sets, analyze their content and identify the entities and schema elements that should be connected via the links. Analogously to any other kind of data, in order to be truly useful and ready to be consumed, links need to comply with the criteria of high quality data (e.g., syntactically and semantically accurate, consistent, up-to-date). Despite the progress in the field of machine learning, human intelligence is still essential in the quest for high quality links: humans can train algorithms by labeling reference examples, validate the output of algorithms to verify their performance on a data set basis, as well as augment the resulting set of links. Humans —especially expert humans, however, have limited availability. Hence, extending data quality management processes from data owners/publishers to a broader audience can significantly improve the data quality management life cycle. Recent advances in human computation and peer-production technologies opened new avenues for human-machine data management techniques, allowing to involve non-experts in certain tasks and providing methods for cooperative approaches. The research work presented in this thesis takes advantage of such technologies and investigates human-machine methods that aim at facilitating link quality management in the Semantic Web. Firstly, and focusing on the dimension of link accuracy, a method for crowdsourcing ontology alignment is presented. This method, also applicable to entities, is implemented as a complement to automatic ontology alignment algorithms. Secondly, novel measures for the dimension of information gain facilitated by the links are introduced. These entropy-centric measures provide data managers with information about the extent the entities in the linked data set gain information in terms of entity description, connectivity and schema heterogeneity. Thirdly, taking Wikidata —the most successful case of a linked data set curated, linked and maintained by a community of humans and bots— as a case study, we apply descriptive and predictive data mining techniques to study participation inequality and user attrition. Our findings and method can help community managers make decisions on when/how to intervene with user retention plans. Lastly, an ontology to model the history of crowd contributions across marketplaces is presented. While the field of human-machine data management poses complex social and technical challenges, the work in this thesis aims to contribute to the development of this still emerging field.

The growing numbers of breeding rooks (Corvus frugilegus) in the city of Landau (Rhineland- Palatinate, Germany) increase the potential for conflict between rooks and humans, which is mainly associated with noise and faeces. Therefore, the aim of this work is a better understanding of the breeding tree selection of the rook in order to develop options for action and management in the future. Part I of this thesis provides general background information on the rook and includes mapping of the rookeries in the Anterior Palatinate and South Palatinate including Landau in the year 2020. That mapping revealed that the number of rural colonies has decreased, while the number of urban colonies has increased in the study area in the last few years. In line with current literature, tree species and tree size were important criteria for breeding tree selection. However, the mapping showed that additional factors must be important as well. Therefore, as rooks seem to often breed along traffic axes, Part II of this thesis examines how temperature, artificial light and noise, which are all linked to traffic axes, affect the breeding tree selection of the rook in the city of Landau. The following three hypotheses are developed: (1) manually selected breeding trees (Bm) have a warmer microclimate than manually selected non-breeding trees (Nm) or randomly selected non-breeding trees (Nr), (2) Bm are exposed to a higher light level than Nm or Nr and (3) Bm are exposed to a higher noise level than Nm or Nr. To test these hypotheses, 15 Bm, 13 Nm and 16 Nr are investigated. The results show that Bm were exposed to more noise than both types of non-breeding trees (μBm, noise = 36.52481 dB, μNm, noise = 31.27229 dB, μNr, noise = 29.17417 dB) where the difference between Bm and Nr was significant. In addition, there was a tendency for Bm to be exposed to less light (μBm, light = 0.356 lx) than Nm (μNm, light = 0.4107692 lx) and significantly less light than Nr (μNr, light = 1.995 lx), while temperature did not differ between the groups (μBm, temp = 16.90549 °C, μNm, temp = 16.93118 °C, μNr, temp = 17.28639 °C). This study shows for the first time that rooks prefer trees which are exposed to low light levels and high noise levels, i.e. more intense traffic noise, for breeding. It can only be speculated that the cause of this is lower enemy pressure at such sites. The fact that temperature does not seem to have any influence on breeding tree selection may be due to only small temperature differences at nest height, which might be compensated by breeding behaviour. Consequently, in the long term one management approach could be to divert traffic from inner-city areas, especially schools and hospitals, to bypasses. If tree genera suitable for rooks, such as plane trees, are planted along the bypasses, those sites could provide suitable alternative habitats to inner-city breeding locations, which become less attractive for breeding due to noise reduction. In the short term in addition to locally implemented repellent measures the most effective approach is to strengthen rook acceptance among the population. However, further research is needed to verify the results of this thesis and to gain further insights into rook breeding site selection in order to develop effective management measures.

Agricultural intensification is leading to a severe decline in farmland biodiversity worldwide. The resulting landscape simplification through the expansion of monocultures and removal of non-crop habitats has a major impact on arthropod communities in agricultural landscapes. While arable fields are often highly disturbed and ephemeral habitats that are unsuitable for many species, non-crop habitats in agroecosystems can provide important refugia. The creation of non-crop habitats through agri-environmental schemes (AES) in intensive agricultural landscapes, such as the ‘Maifeld’ region in western Germany, is intended to mitigate the negative effects of agricultural intensification, although the effectiveness of these measures for nature conservation is still controversial. Therefore, this work focuses on the taxonomic and functional diversity of beetles (Coleoptera) and spiders (Araneida), being important providers of ecosystem services, between wheat fields and different non-crop habitats, namely grassy field margins adjacent to wheat and oilseed rape fields, small- and large-scale set-aside areas sown with wildflowers, and permanent grassland fallows. Arthropods were collected between 2019 and 2020 using pitfall traps and suction sampling. Land-use type influenced beetle and spider diversity in the study area, with significantly higher values in grassland fallows than wheat fields. Surprisingly, species diversity differed little among all non-crop habitats, but all harboured distinct species assemblages. In particular, large long-term grassland fallows showed the largest within-group variation of beetle and spider assemblages and represented important habitats, especially for habitat specialists and threatened species, likely due to their variable soil moisture and complex habitat structure. In contrast, the homogeneous arthropod assemblages of wheat fields exhibited lower trait richness and were dominated by a few predatory species adapted to such disturbed, man-made habitats. Interestingly, all conservation measures complemented each other in that they contributed in different ways to supporting beetles and spiders in agricultural landscapes. Even small-scale non-crop habitats and existing habitat boundaries in an agricultural matrix appear to be valuable habitats for farmland arthropods by enhancing taxonomic diversity. Field margins and small wildflower-sown patches can link isolated non-crop habitats and contribute to a heterogeneous agricultural landscape. Consequently, a combination of various small- and large-scale greening measures leads to increased compositional and configurational landscape heterogeneity, resulting in improved beetle and spider diversity. Considering the ongoing loss of farmland biodiversity worldwide, agri-environmental schemes should be promoted in the future, as they are particularly important for arthropod conservation in intensive agricultural landscapes such as the Maifeld region.

The Remote Working Study 2022 is focused on the transition to work from home (WFH) triggered by the stay at home directives of 2020. These directives required employees to work in their private premises wherever possible to reduce the transmission of the coronavirus. The study, conducted by the Center for Enterprise Information Research (CEIR) at the University of Koblenz from December 2021 to January 2022, explores the transition to remote working. The objective of the survey is to collect baseline information about organisations’ remote work experiences during and immediately following the COVID-19 lockdowns. The survey was completed by the key persons responsible for the implementation and/or management of the digital workplace in 19 German and Swiss organisations. The data presented in this report was collected from member organisations of the IndustryConnect initiative. IndustryConnect is a university-industry research programme that is coordinated by researchers from the University of Koblenz. It focuses on research in the areas of the digital workplace and enterprise collaboration technologies, and facilitates the generation of new research insights and the exchange of experiences among user companies.

Der Zweck dieser Arbeit ist es, sich auf die kritischen Forschungsherausforderungen und -themen zu konzentrieren, die UI/UX-Designprinzipien umgeben, mit einem Schwerpunkt auf kulturübergreifenden Konzepten aus der Perspektive von E-Learning-Plattformen. Zu diesem Zweck betrachten wir zunächst die kulturellen Dimensionen auf der Grundlage des Hofstede-Rahmens mit dem Ziel, wichtige kulturelle Werte zu identifizieren. Als zweites Ziel der Forschung erleichtert eine Reihe von Kriterien, die so genannte Usability-Heuristik von Nielsen, die Erkennung von Usability Problemen bei der Gestaltung von Benutzeroberflächen (UI). Die Usability-Heuristiken umfassen zehn Variablen, die die Interaktion zwischen dem Benutzer und einem Produkt oder System beeinflussen. Wenn wir uns näher mit diesen Themen befassen, werden wir in der Lage sein, eine Matrix mit Beziehungen zwischen der heuristischen Bewertung von Nielsen und dem kulturellen Rahmen von Geert Hofstede aufzudecken. Abschließend erörtern wir das mögliche Potenzial kultureller Werte zur Beeinflussung von Benutzeroberflächen für E-Learning-Plattformen. In der Tat gibt es einige Funktionen in E-Learning-Plattformen, die aufgrund der Kultur weniger diskutiert werden, obwohl sie sehr praktisch in die Plattformen integriert werden können.

Agriculture requires a sustainable intensification to feed the growing world population without exacer-bating soil degradation and threatening soil quality. Globally, plastic mulching (PM) is increasingly used to improve crop growth and yields and consequently agronomic productivity. However, recent literature reported also critical aspects of PM for soil quality and showed contradictory outcomes. This might result from the numerous applications of PM in different climates across various crops, soils and agri-cultural techniques. Thus, a closer look is necessary on how PM influences soil processes under certain climate and cultivation conditions to obtain a comprehensive understanding of its effects, which is im-portant to evaluate PM in terms of a sustainable agriculture. The aim of this PhD thesis was to understand how multiannual PM influences soil properties and pro-cesses under the temperate, humid Central European cultivation conditions and to evaluate the resulting consequences for soil quality. I designed a three-year field study to investigate the influence of PM (black polyethylene, 50 μm) on microclimate, structural stability, soil organic matter (SOM) and the concentrations of selected fungicides and mycotoxins in three soil layers (0–10, 10–30 and 30–60 cm) compared to straw mulching (SM). Both mulching types were applied in a drip-irrigated ridge-furrow system in strawberry cultivation. PM shifted the soil microclimate to higher soil temperatures and lower soil moistures. The higher soil temperature seems thus to be the key factor for the increased crop growth and yields under the present humid climate. The reduced soil moisture under PM indicated that under PM the impeded rainfall infil-tration had a stronger effect on the water balance than the reduced evaporation. This indicate an ineffi-cient rainwater use in contrast to arid climates. PM changed the water cycling in the ridges from down-ward directed water flows to lateral water flows from furrows to ridges. This reduced nitrogen leaching in the topsoil (0–10 cm) in the strawberry establishment period. The plastic mulches avoided aggregate breakdown due to rapid soil wetting and excess water during rainfalls and thus maintained a loose and stable soil structure in the surface soil, which prevents soil compaction and made soil less prone to erosion. PM changed carbon fluxes and transformation so that a larger total and more stable SOM was observed. Thus, the higher belowground biomass productivity under PM compensated the impeded aboveground biomass input and the temperature-induced SOM decomposition. However, SM increased the labile and total SOM in the topsoil after the first experiment year and promoted microbial growth due to the aboveground biomass incorporation. PM reduced fungicide entry into soil compared to SM and reduced consequently the fungal biomass reduction and the biosynthesis of the mycotoxin deoxyni-valenol. The modified microclimate under PM did not increase mycotoxin occurrence. In this context, PM poses no risk for an increased soil contamination, impairing soil quality. This PhD thesis demon-strated that the PM effects on soil can vary depending on time, season and soil depth, which emphasizes the importance to include soil depth and time in future studies. Compared to semiarid and arid regions, the PM effects found in this PhD thesis were small, absent or in another way. I attributed this to the fact that PM under humid climate reduced instead of increased soil moisture and that SM had due to straw und strawberry canopy a similar ‘covering effect’ as PM. Thus, generalizing the PM effects on soil across different climates seems hardly possible as they differ in type and extent depending on climate. A differentiated consideration is hence necessary to evaluate the PM effects on soil quality. I conclude that PM under temperate, humid climate might contribute to reduce soil degradation (e.g., SOM depletion, erosion, nutrient leaching, soil compaction and soil contamina-tion), which sustains soil quality and helps to enable a sustainable agricultural intensification. However, further research is necessary (1) to support my findings on a larger scale, longer time periods and across various soil and crop types, (2) to address remaining open questions and (3) to develop optimization to overcome the critical aspects of PM (e.g. macro- and microplastic waste in soil, mulch disposal).