Carabids, which are frequently distributed in agricultural landscapes, are natural enemies of different pests including slugs. Semi-natural habitats are known to affect carabids and thus, their potential to support natural pest control. The impact of semi-natural habitats was investigated on carabids and slugs within different non-crop habitats (chapter 2). Most carabids and Deroceras reticulatum showed preferences for herbaceous semi-natural habitats, while Arion spp. occured mainly in woody habitats. An increase of predatory carabid abundance, which was linked to an inclining amount of semi-natural habitats in the landscape, and a decrease of Arion spp. densities, indicated a high potential for slug control in structural rich landscapes. Effects of semi-natural habitats were investigated on predatory carabids and slugs in 18 wheat fields (chapter 3). Predatory carabid species richness was positively affected by the increasing amount of semi-natural habitats in the landscape, whereas predatory carabid abundance was neither influenced by adjacent habitat type nor by the proportion of semi-natural habitats in the landscape. The target pest species showed divergent patterns, whereas Arion spp. densities were highest in structural poor landscapes near woody margins. D. reticulatum was not affected by habitat type or landscape, reflecting its adaptation to agriculture. Results indicate an increased control of Arion spp. by carabids in landscapes with a high amount of semi-natural habitats. Effects of semi-natural habitats and the influence of farming system was tested on carabid distribution within 18 pumpkin fields (chapter 4). Carabid species richness generally increased with decreasing distance to the field margins, whereas carabid abundance responded differently according to the adjacent habitat type. Farming system had no effect on carabids and landscape heterogeneity only affected carabids in organic pumpkin fields. Slug and slug egg predation of three common carabid species was tested in single and double species treatments in the laboratory (chapter 5). Results show additive and synergistic effects depending on the carabid species. In general, semi-natural habitats can enhance the potential of slug control by carabids. This counts especially for Arionid slugs. Semi-natural habitats can support carabid communities by providing shelter, oviposition and overwintering sites as wells as complementary food sources. Therefore, it is important to provide a certain amount of non-crop habitats in agricultural landscapes. 

Cultural eutrophication due to excessive inputs of nutrients seriously threatens aquatic ecosystems worldwide and is one of the major anthropogenic stressors on aquatic biota in European rivers. In streams and shallow rivers, its effects include excessive periphyton growth, which causes biological clogging and thereby oxygen depletion in the hyporheic zone. The result is a serious degradation of habitat quality for benthic invertebrates as well as for the eggs and larvae of gravel-spawning fish. Unlike in standing waters, efficient tools for controlling eutrophication in rivers are lacking. However, top-down control of the food-web by manipulating fish stocks, similar to the biomanipulation successfully applied in lakes, offers a promising approach to mitigating the effects of eutrophication in shallow rivers, especially those in which major reductions in nutrient inputs are not feasible. The overall aim of this thesis was to assess the potential for top-down control by two large cypriniform fish, the common nase (Chondrostoma nasus), the only obligate herbivorous fish species in European rivers, and the omnivorous European chub (Squalius cephalus), to mitigate the effects of eutrophication in medium-sized rivers. I therefore conducted field experiments on different spatial and temporal scales in the hyporhithral zone of a eutrophic gravel-bed river. Generally, the results of those experiments revealed the crucial role of fish-mediated top-down effects in river food webs. In a 4-year reach-scale experiment, the key contribution of my thesis, the enhancement of fish densities significantly increased both oxygen availability and water exchange in the upper layer of the hyporheic zone, even though the top-down effects of the fish on periphyton biomass were relatively small. These findings were supported by those of a 4-week mesocosm experiment, which also provided insights into the mechanisms underlying the mitigation of eutrophication effects by nase and chub. The top-down effects of both fish species reduced hyporheic oxygen depletion, suggesting a reduction of biological clogging. The positive effects of herbivorous nase on hyporheic oxygen availability could be attributed to benthic grazing, whereas the reduction of hyporheic oxygen depletion in the presence of omnivorous chub was best explained by the enhanced bioturbation induced by the fish’s benthic foraging. Overall, the results of my thesis demonstrate that biomanipulation achieved by enhancing herbivorous and omnivorous fish stocks can mitigate the effects of eutrophication in medium-sized European rivers. The results may be the first step towards the establishment of biomanipulation as a supportive management tool for eutrophication control in running waters and therefore as a strategy to preserve aquatic biodiversity.

This study had two main aims. The first one was to investigate the quality of lesson plans. Two important features of lesson plans were used as a basis to determine the quality of lesson plans. These are adaptability to preconditions and cognitive activation of students. The former refers to how the planning teacher considers the diversity of students pre-existing knowledge and skills. The latter refers to how the planning teacher sequences deep learning tasks and laboratory activities to promote the cognitive activation of students. The second aim of the study was to explore teachers thinking about and explanation of externally generated feedback data on their students’ performance. The emphasis here was to understand how the teachers anticipate planning differentiated lessons to accommodate the variations in students learning outcomes revealed by the feedback data. The study followed a qualitative approach with multiple sources of data. Concept maps, questionnaires, an online lesson planning tool, standardized tests, and semi-structured interviews were the main data collection instruments used in the study. Participants of this study were four physics teachers teaching different grade levels. For the purpose of generating feedback for the participant teachers, a test was administered to 215 students. Teachers were asked to plan five lessons for their ongoing practices. The analysis showed that the planned lessons were not adapted to the diversity in students pre-existing knowledge and skills. The analysis also indicated that the lessons planned had limitations with regard to cognitive activation of students. The analysis of the interview data also revealed that the participant teachers do not normally consider differentiating lessons to accommodate the differences in students learning, and place less emphasis on the cognitive activation of students. The analysis of the planned lessons showed a variation in teachers approach in integrating laboratory activities in the sequence of the lessons ranging from a complete absence through a demonstrative to an investigative approach. Moreover, the findings from the interviews indicated differences between the participant teachers espoused theory (i.e. what they said during interview) and their theory- in –use (i.e. what is evident from the planned lessons). The analysis of the interview data demonstrated that teachers did not interpret the data, identify learning needs, draw meaningful information from the data for adapting (or differentiating) instruction. They attributed their students’ poor performance to task difficulty, students’ ability, students’ motivation and interest. The teachers attempted to use the item level and subscale data only to compare the relative position of their class with the reference group. However, they did not read beyond the data, like identifying students learning needs and planning for differentiated instruction based on individual student’s performance.

Zum Inhalt: Die Dissertation ist in einem empirisch-qualitativen Forschungssetting eingebettet, bei der das Team-Teaching als Unterrichtsmethode im Forschungsfokus steht. Die Erhebung des empirischen Datenmaterials erfolgt einerseits mittels teilnehmender Beobachtung im Forschungsfeld und andererseits durch ein Gruppeninterview, das mit Lehrkräften geführt wird, die über einen gewissen Beobachtungszeitraum Erfahrungen mit der Unterrichtsmethode des Team-Teaching gesammelt haben. Für die hier zu Grunde gelegte Feldforschung wird das „theoretical sampling“ zum Einsatz kommen, das 1967 von Glaser und Strauss im Rahmen einer empirischen Untersuchung begründet worden ist. Zum Aufbau: In der Einleitung wird das Forschungsinteresse, der Forschungsstand und die zentrale Forschungsfrage der Dissertation beschrieben. Im zweiten Kapitel folgt der theoretische Teil mit einer differenzierten Definition des Team-Teachings als Unterrichtsmethode. Es folgt eine allgemeine Definition zum Unterricht, um die spezifischen Merkmale des Team-Teachings differenziert herausarbeiten zu können. Die empirischen Daten werden im Rahmen einer teilnehmenden Beobachtung im Unterricht der Oberstufe einer Förderschule mit dem Förderschwerpunkt Lernen und sozial-emotionale Entwicklung erhoben. Deshalb sind im Theorieteil der Förderschwerpunkt und die curricularen Aspekte zum Förderschwerpunkt dargestellt. Die Bedeutung der Unterrichtsmethode des Team-Teachings für das Unterrichtssetting in einer Förderschule mit dem sozial-emotionalem Förderschwerpunkt ist ebenfalls im Theorieteil verortet. Im dritten Kapitel werden die qualitativen und quantitativen Erhebungsinstrumente beschrieben und Hypothesen formuliert. Die Darstellung der Methoden zur Aufbereitung des Datenmaterials ist im vierten Kapitel verortet. Die Interpretation der Forschungsergebnisse erfolgt im fünften Kapitel. Die qualitative und quantitative Datenauswertung des empirischen Datenmaterials ist im sechsten Kapitel dargestellt. Die Dissertation schließt im siebten Kapitel mit einen Fazit und Ausblick.

Since the Bologna reform a continuous improvement of the lessons’ quality at school, which is often connected with the professionalization of the future teachers and the teaching post education, is aimed by Alliance and federal states. The quality of the lessons is connected with the professionalization of the future teacher and the teaching post education. In most studies about quality improvement the consideration occurs predominantly from the university view and it is seldom related on the subject Sport. The quality study is established on these two points and leads to the main question: Are there any differences in the teachers‘ and learners‘ perceptions of the professionalization of sport teachers in the certain education phases in Rheinland-Pfalz? With the help of 101 guide interviews and the evaluation according to the Grounded Theory this source question can be answered straight. There were interviewed teachers of the universities, of the state study seminars and the school, as well as learners, to that refer trainees and students. During the study the „missing school relation” crystallizes consistent in all personal groups as key element (core category) in the first and second education phase. The interviewed, which belong to different school forms, give relevant concrete, specific for sport and partially subject covering optimization proposals. As a result a main focus forms untimely relations to the school everyday life and at the same time collect teaching experiences with learning groups at school to get to know their different motor abilities and skills. The improvement approaches concern the university phase and the training period in the study seminars and schools, and the involved consider for necessary a more intensive interlinking of the individual institutions. A mutual, continuous cooperation for the professionalization in the sportsman's education and therefore the optimization of the sports teacher training is very important for all involved.

Nandi forests (South and North Nandi forests) are situated in the Rift Valley Province of Kenya very close to Kakamega forest. From previous documents it has been seen that Kakamega and Nandi forests were connected to each other forming one big "U" shaped forest block till the beginnings of 1900s. Due to human pressures, currently there are three different forests form the previous one block forest. Although they were one forest, information on Nandi forests is very scanty when it is compared to that of Kakamega forest. The species composition and diversity as well as plant communities and population structure of Nandi forests have not been studied. Information is not available about the similarity status of South and North Nandi forests. Furthermore the natural regeneration potential (seedling bank) of these forests is not well studied and documented. Hence this study aims to fill these gaps. In this study totally 76 quadrates (49 from South Nandi and 27 from North Nandi) were used to collect data. In the South Nandi forests 27 of the quadrates were laid in the better side of the forest (at Kobujoi) and the remaining 22 were in the heavily disturbed part of this forest (Bonjoge). The quadrates were arranged on transects that have one to one and half km which were parallel to the slope. The distance between the quadrates was 100 meter and transects are 500 m apart. The size of the main quadrate was 400 m2 (20 X 20 m) which also had five small plots (3 X 3 m) distributed on the four corners and in the center. Each woody plants (climbers, shrubs and trees) having more than one meter and greater than two centimeter diameter at breast height (dbh) were measured and recorded. Seedlings and herbaceous plants were sampled in the smaller plots. Individual plants were identified at species level and when it was not possible to identify in the field voucher specimen were prepared and latter identified at the East African Herbarium, National Museum of Kenya, and Nairobi. Clustering and ordination were performed using PC-ORD and CANOCO ecological softwares, respectively. For both clustering and ordination abundance data of the species was used. Shannon diversity index and evenness were computed using PC-ORD while similarity indices, Fisher alpha, rarefaction, species richness estimation (nonparametric species richness estimators) were conducted using EstimateS. Indicator species analysis was undertaken using PC-ORD. Basal area and height class distribution at forests level or site level (Bonjoge and Kobujoi) and diameter (dbh) class distribution for selected trees species were performed to evaluate population structure. Furthermore importance value (IV) of woody plant species was calculated. SPSS version 16 was used to undertake both parametric (when data assume normal distribution) and nonparametric (when data are not assuming normal distribution) comparison of means, correlation and regression analysis. In this study totally 321 vascular plant species comprising 92 families and 243 genera were identified in Nandi forests (both South and North Nandi forests). In South Nandi forest 253 plant species form 82 families and 201 genera were recorded while in North Nandi 181 species comprising 67 families and 155 genera were recorded. Jackknife second order estimators gave the highest species richness estimate for both South and North Nandi forests i.e. 284 and 209, respectively. In the case of highly disturbed and less disturbed parts of South Nandi forest 138 and 172 vascular plant species were recorded, respectively. Asteraceae, Rubiaceae and Euphorbiaceae are the top three species rich families of Nandi forests. In terms of different diversity measures (i.e. alpha and beta diversity, Fisher alpha, Shannon diversity and evenness indices) South Nandi is more diverse than North Nandi forest. Sörensen and Jaccard (classic) as well as their respective abundance based similarities showed that there is a low species similarity between South and Nandi forests. The cluster analysis resulted in three different plant communities and this result is supported by the ordination result. South and North Nandi forest has inverted "J" height class distribution showing that larger proportion of woody plant individuals are found in the lower height classes. Similar pattern is observed when the diameters of all woody plants were considered together. However, different diameter class distributions (seven types) were identified when selected tree species were analyzed separately. It has been observed that the basal area of South Nandi forest is significantly lower than that of North Nandi forest (Mann-Whitney U =358, p < 0.001). Similarly Bonjoge has significantly lower basal area (t-value=3.77, p<0.01) than that of Kobujoi. Number of woody plat seedlings in South Nandi forest is significantly higher than that of North Nandi (Mann-Whitney U = 362.5, p<0.001). In the same way Bonjoge has significantly smaller number of ssedlings than Kobujoi (t-value 4.24, p<0.001). Most of species in both forests are able to resprout from stumps after physical damage; hence this helps the regeneration of the forests in addition to seedling banks. This study enables to fill some of the information gaps about Nandi forests especially of floristic composition, population structure, natural regeneration and human impacts on this ecosystem.

In jüngerer Vergangenheit erlebt der zumeist auf Michel Foucault zurückgeführte Begriff des 'Dispositivs' – ähnlich wie zuvor der des 'Diskurses' – eine regelrechte Konjunktur in den Geistes-, Sozial- und Kulturwissenschaften. Seine Verwendung weist jedoch eine Reihe von Ver­kür­zungen und Entstellungen auf; so werden damit recht pauschal meist bloß die architekturalen und/oder räumlichen Umstände bzw. Kontexte sozialer, medialer oder anderer Situationen be­zeich­net, ohne die für Foucault so wichtigen Fragen nach Wissen, Macht und Subjektivität zu beachten. So gerät der Begriff in Gefahr, seine theoretische und analytische Potenz einzubüßen. In „Im Dispositiv. Macht, Medium, Wissen“ legt die Autorin daher in einem ersten Schritt eine Präzisierung des Dispositivbegriffs vor, der den zugrundeliegenden Theoriehorizont Foucaults systematisch miteinbezieht. Dazu werden zunächst diskurstheoretische Grundlagen erläutert und anschließend deren strukturelle Analogien zu den machtanalytischen Befunden Foucaults mit Hilfe einer neuen Terminologie sichtbar gemacht. Vor allem in den Medienwissenschaften ist der Begriff des Dispositivs prominent, um die gesell­schaftliche Einbettung von Einzelmedien zu pointieren. Jedoch fällt auf, dass der dort in weiten Teilen vertretene Ansatz, Medien als Dispositive zu verstehen, den Blick auf medienspezifische Eigenlogiken verstellt. In einem zweiten Schritt weist die Autorin daher die strukturellen Analogien von Medialität, Wissen und Macht auf und kommt so zu einem integrativen Dispositivkonzept, das die drei Sphären als dynamisch miteinander verknüpfte, interdependente und reziproke Felder von Kultur modelliert.

Enterprise Collaboration Systems (ECS) werden zunehmend als Kernkomponenten des digitalen Arbeitsplatzes in Unternehmen eingesetzt, die mit der Implementierung dieser neuen Softwaregattung jeweils unterschiedliche Ziele für die innerbetriebliche Zusammenarbeit verfolgen. Diese Ziele werden in der Praxis oftmals nicht eindeutig genug formuliert. Der Einsatz von traditionellen Controlling-Kennzahlen mit dem Schwerpunkt auf Termineinhaltung und Kosten sind zudem ungeeignet, um die Realisierung des individuellen Nutzens von ECS zu messen. Diese Forschungsarbeit beschreibt die Entwicklung und Anwendung des Benefits Scorecards for Collaboration Platforms in Enterprises (SCoPE) Frameworks, das als ein Rahmenwerk für die kennzahlengestützte Nutzenmessung von ECS dient und an dem Goal-Question-Metrics-Approach der NASA sowie der Balance Scorecard von Kaplan & Norton angelehnt ist. Die Ergebnisse tragen zu einem breiteren Verständnis der kennzahlenbasierten Nutzenanalyse für ECS in Organisationen bei. Das Benefits-SCoPE-Framework wurde in enger Zusammenarbeit mit Experten aus 16 Anwenderunternehmen im Rahmen der Initiative IndustryConnect entwickelt. In einem design-orientierten Ansatz wurde ein ausgewählter Methodenmix angewandt, inklusive Experteninterview, Fokusgruppe, Workshop und Card Sorting. Der von Anwenderunternehmen erwartete Nutzen des ECS wird in spezifische, durch Kennzahlen beantwortbare Fragestellungen umformuliert und fragmentiert. Insgesamt konnten so 313 nutzenorientierte Fragen von drei Anwenderunternehmen identifiziert werden. Die durchgeführte Kategorisierung der Fragen verdeutlicht zum einen das gemeinsame Verständnis der Unternehmen hinsichtlich der entscheidenden Faktoren für die Nutzenrealisierung von ECS und zum anderen die Nutzen-ziele, die die Unternehmen durch den Einsatz des ECS anvisieren. Die Entwicklung und Erhebung von Kennzahlen zur quantitativen Beantwortung von ausgewählten Fragestellungen wird mit funktions-fähigen Prototypen auf einer operativen Kollaborationsplattform demonstriert, die seit mehr als sieben Jahren im Einsatz ist und mehr als 5.000 registrierte Benutzer aufweist. Die Kennzahlenentwicklung, die Auswahl der Datenerhebungsmethode, die Durchführung der Messung sowie die Interpretation der Messergebnisse werden im Framework durch die Verwendung von Benefits Scorecards unterstützt. Die individuelle Orchestrierung mehrerer Benefits Scorecards repräsentiert die Struktur eines Ordnungssystems zur ECS-Nutzenanalyse in Anwenderunternehmen und verdeutlicht das Vorgehen zur Erhebung der äquivalenten Daten.

Connected vehicles will have a tremendous impact on tomorrow’s mobility solutions. Such systems will heavily rely on information delivery in time to ensure the functional reliability, security and safety. However, the host-centric communication model of today’s networks questions efficient data dissemination in a scale, especially in networks characterized by a high degree of mobility. The Information-Centric Networking (ICN) paradigm has evolved as a promising candidate for the next generation of network architectures. Based on a loosely coupled communication model, the in-network processing and caching capabilities of ICNs are promising to solve the challenges set by connected vehicular systems. In such networks, a special class of caching strategies which take action by placing a consumer’s anticipated content actively at the right network nodes in time are promising to reduce the data delivery time. This thesis contributes to the research in active placement strategies in information-centric and computation-centric vehicle networks for providing dynamic access to content and computation results. By analyzing different vehicular applications and their requirements, novel caching strategies are developed in order to reduce the time of content retrieval. The caching strategies are compared and evaluated against the state-of-the-art in both extensive simulations as well as real world deployments. The results are showing performance improvements by increasing the content retrieval (availability of specific data increased up to 35% compared to state-of-the-art caching strategies), and reducing the delivery times (roughly double the number of data retrieval from neighboring nodes). However, storing content actively in connected vehicle networks raises questions regarding security and privacy. In the second part of the thesis, an access control framework for information-centric connected vehicles is presented. Finally, open security issues and research directions in executing computations at the edge of connected vehicle networks are presented.

Because silver nanoparticles (Ag NPs) are broadly applied in consumer products, their leaching will result in the continuous release of Ag NPs into the natural aquatic environment. Therefore, bacterial biofilms, as the prominent life form of microorganisms in the aquatic environment, are most likely confronted with Ag NPs as a pollutant stressor. Notwithstanding the significant ecological relevance of bacterial biofilms in aquatic systems, and though Ag NPs are expected to accumulate within these biofilms in the environment, the knowledge on the environmental and ecological impact of Ag NPs, is still lagging behind the industrial growth of nanotechnology. Consequently, aim of this thesis was to perform effect assessment of Ag NP exposure on bacterial biofilms with ambient Ag NPs concentrations and under environmentally relevant conditions. Therefore, a comprehensive set of methods was applied in this work to study if and how Ag NPs of two different sizes (30 and 70 nm) affect bacterial biofilms i.e. both monospecies biofilms and freshwater biofilms in environmentally relevant concentrations (600 - 2400 µg l-1). Within the first part of this work, a newly developed assay to test the mechanical stability of monospecies biofilms of the freshwater model bacterium Aquabacterium citratiphilum was validated. In the first study, to investigate the impact of Ag NPs on the mechanical stability of bacterial biofilms, sublethal effects on the mechanical stability of the biofilms were observed with negative implications for biostabilization. Furthermore, as it is still challenging to monitor the ecotoxicity of Ag NPs in natural freshwater environments, a mesocosm study was performed in this work to provide the possibility for the detailed investigation of effects of Ag NPs on freshwater biofilms under realistic environmental conditions. By applying several approaches to analyze biofilms as a whole in response to Ag NP treatment, insights into the resilience of bacterial freshwater biofilms were obtained. However, as revealed by t-RFLP fingerprinting combined with phylogenetic studies based on the 16S gene, a shift in the bacterial community composition, where Ag NP-sensitive bacteria were replaced by more Ag NP-tolerant species with enhanced adaptability towards Ag NP stress was determined. This shift within the bacterial community may be associated with potential detrimental effects on the functioning of these biofilms with respect to nutrient loads, transformation and/or degradation of pollutants, and biostabilization. Overall, bringing together the key findings of this thesis, 4 general effect mechanisms of Ag NP treatment have been identified, which can be extrapolated to natural freshwater biofilms i.e. (i) the identification of Comamonadaceae as Ag NP-tolerant, (ii) a particular resilient behaviour of the biofilms, (iii) the two applied size fractions of Ag NPs exhibited similar effects independent of their sizes and their synthesis method, and (iv) bacterial biofilms show a high uptake capacity for Ag NPs, which indicates cumulative enrichment.

This thesis presents the analysis of gamebased touristic applications. In tourism, actions can only be motivated intrinsic. Thus, this thesis at first researches specific intrinsic motivation concepts. It shows how gamebased motivation can be produced on purpose and answers the question whether gamebased motivation can be transferred to non-gamebased applications. Using these results, different touristic applications have been developed and evaluated. All applications aimed to add value to the touristic experience. The applications are sorted by their mobility. There are completely mobile, completely stationary and hybrid systems in this work. There are different ways to add value which are presented in this work: Gamebased exploration, knowledge transfer and social interaction between tourists. Finally, an authoring tool for gamebased touristic tours on smartphones is presented.

This thesis was motivated by the need to advance the knowledge on the variability and dynamics of energy fluxes in lakes and reservoirs, as well as about the physical processes that regulate the fluxes at both the air and water side of the air-water interface. In the first part, I re-examine how mechanical energy, resulting from its major source – the vertical wind energy flux - distributes into the various types of water motions, including turbulent flows and surface and internal waves. Although only a small fraction of the wind energy flux from the atmosphere is transferred to the water, it is crucial for physical, biogeochemical and ecological processes in lentic ecosystems. Based on extensive air- and water-side measurements collected at two small water bodies (< 10 km2), we estimated the energy fluxes and energy content in surface and in internal waves. Overall, the estimated energy fluxes and energy content agree well with results reported for larger water bodies, suggesting that the energetics driving the water motions in enclosed basins is similar, independently of the basin size. Our findings highlight the importance of the surface waves that receive the largest fraction of the wind energy flux, which strongly nonlinearly increases for wind speeds exceeding 3 m s-1. We found that the existing parameterization of the wave height as a function of wind speed and fetch length did not reproduce the measured wave amplitude in lakes. On average, the highest energy content was observed in basin-scale internal waves, together with high-frequency internal waves exhibiting seasonal variability and varies among the aquatic systems. During our analysis, we discovered the diurnal variability of the energy dissipation rates in the studied lake, suggesting biogenic turbulence generation, which appears to be a widespread phenomenon in lakes and reservoirs. In the second part of the thesis, I addressed current knowledge gaps related to the bulk transfer coefficients (also known as the drag coefficient, the Stanton number and the Dalton number), which are of a particular importance for the bulk estimation of the surface turbulent fluxes of momentum, sensible and latent heat in the atmospheric boundary layer. Their inaccurate representation may lead to significant errors in flux estimates, affecting, for example, the weather and climate predictions or estimations of the near-surface current velocities in lake hydrodynamic models. Although the bulk transfer coefficients have been extensively studied over the past several decades (mainly in marine and large-lake environments), there has been no systematic analysis of measurements obtained at lakes of different size. A significant increase of the transfer coefficients at low wind speeds (< 3 m s-1) has been observed in several studies, but, to date, it has remained unexplained. We evaluated the bulk transfer coefficients using flux measurements from 31 lakes and reservoirs. The estimates were generally within the range reported in previous studies for large lakes and oceans. All transfer coefficients increased substantially at low wind speeds, which was found to be associated with the presence of gusts and capillary waves (except the Dalton number). We found that the Stanton number is systematically higher than the Dalton number. This challenges the assumption made in the Bowen-ratio method, which is widely used for estimating evaporation rates from micrometeorological measurements. We found that the variability of the transfer coefficients among the lakes could be associated with lake surface area. In flux parameterizations at lake surfaces, it is recommended to consider variations in the drag coefficient and the Stanton number due to wind gustiness and capillary wave roughness while the Dalton number could be considered as constant at all wind speeds. In the third part of the thesis, I address the key drivers of the near-surface turbulence that control the gas exchange in a large regulated river. As all inland waters, rivers are an important natural source of greenhouse gases. The effects of the widespread alteration and regulation of river flow for human demands on gas exchange is largely unknown. In particular, the near-surface turbulence in regulated rivers has been rarely measured and its drivers have not been identified. While in lakes and reservoirs, near-surface turbulence is mainly related to atmospheric forcing, in shallow rivers and streams it is generated by bottom friction of the gravity-forced flow. The studied large regulated river represents a transition between these two cases. Atmospheric forcing and gravity were the dominant drivers of the near-surface turbulence for a similar fraction of the measurement period. Based on validated scalings, we derived a simple model for estimating the relative contributions of wind and bottom friction to near-surface turbulence in lotic ecosystems with different flow depths. Large diel variability in the near-surface energy dissipation rates due to flow regulation leads to the same variability in gas exchange. This suggests that estimates of gas fluxes from rivers are biased by measurements performed predominantly during daytime. In addition, the novelty in all the analyses described above is the use of the turbulent surface fluxes measured directly by the eddy-covariance technique – at the moment of writing, the most advanced method. Overall, this thesis is of a potential interest for a broad range of scientific disciplines, including limnology, micrometeorology and open channel hydraulics.

The publication of freely available and machine-readable information has increased significantly in the last years. Especially the Linked Data initiative has been receiving a lot of attention. Linked Data is based on the Resource Description Framework (RDF) and anybody can simply publish their data in RDF and link it to other datasets. The structure is similar to the World Wide Web where individual HTML documents are connected with links. Linked Data entities are identified by URIs which are dereferenceable to retrieve information describing the entity. Additionally, so called SPARQL endpoints can be used to access the data with an algebraic query language (SPARQL) similar to SQL. By integrating multiple SPARQL endpoints it is possible to create a federation of distributed RDF data sources which acts like one big data store. In contrast to the federation of classical relational database systems there are some differences for federated RDF data. RDF stores are accessed either via SPARQL endpoints or by resolving URIs. There is no coordination between RDF data sources and machine-readable meta data about a source- data is commonly limited or not available at all. Moreover, there is no common directory which can be used to discover RDF data sources or ask for sources which offer specific data. The federation of distributed and linked RDF data sources has to deal with various challenges. In order to distribute queries automatically, suitable data sources have to be selected based on query details and information that is available about the data sources. Furthermore, the minimization of query execution time requires optimization techniques that take into account the execution cost for query operators and the network communication overhead for contacting individual data sources. In this thesis, solutions for these problems are discussed. Moreover, SPLENDID is presented, a new federation infrastructure for distributed RDF data sources which uses optimization techniques based on statistical information.

Changing lives through relocation - This is the vision of a socialized housing project in the Philippines which is subject of this dissertation. It is a polyphonic ethnography that investigates the transition process from an informal, marginalized, self-organized lifestyle in squatter areas and dumpsite settlements to an institutionalized and policy-based life in the socialized housing project. The transition process is analyzed from a material cultural perspective taking into account selected aesthetic theories. With this approach, the dissertation aims to contribute to the study of the aesthetic dimension of everyday life from an ethnographic perspective. Aesthetics are applied on three levels: (1) On the theoretical level, the concepts of social aesthetics and atmospheres enrich the analysis of the interrelation between the residents and their new house in the socialized housing project. (2) On the methodological level, the relevance of aesthetic experiences for the ethnographic knowledge process are discussed. And (3) on the descriptive level, selected and thematically relevant sensory and aesthetic experiences of the researcher inform the ethnographic account in the form of memoirs. By incorporating aesthetic theories, the dissertation gives a more holistic account of the dynamics active in the transition process. It shows that the change of lifestyle is experienced sensorily through the daily physical engagement with the new material environment, i.e. its specific materiality and infrastructure, its affordances and constraints giving rise to new experiences and needs. In this process, the residents become aware of the differences between the past and present way of life and thus experience the new challenges through their physical being in the new material environment. On the one hand, this evokes a nostalgic attitude towards their previous life, but on the other hand, it also gives form to ideas of a possible future.

Modern agriculture is a dominant land use in Europe, although it has been associated with negative effects on biodiversity in agricultural landscapes. One species-rich insect group in agro-ecosystems is the Lepidoptera (moths and butterflies); however, the populations of a number of Lepidoptera species are currently declining. The aims of this thesis were to assess the amount and structure of field margins in agricultural landscapes, study the effects of realistic field margin input rates of agrochemicals (fertilizer and pesticides) on Lepidoptera, and provide information on moth pollination services. In general, field margins are common semi-natural habitat elements in agro-ecosystems; however, data on the structure, size, and width of field margins is limited. An assessment in two German agricultural landscapes (4,000 ha each) demonstrated that many of the evaluated field margins were less than 3 m wide (Rhineland‐Palatinate: 85% of margin length; Brandenburg: 45% margin length). In Germany, risk mitigation measures (such as buffer zones) to reduce pesticide inputs to terrestrial non-crop habitats do not have to be established by farmers next to narrow field margins. Thus, narrow field margins receive inputs of agrochemicals, especially via overspray and spray drift. These field margins were used as a development habitat for caterpillars, but the mean abundance of caterpillars was 35 – 60% lower compared with that in meadows. Caterpillars were sensitive to realistic field margin input rates of insecticide (pyrethroid, lambda-cyhalothrin) in a field experiment as well as in laboratory experiments. Moreover, 40% fewer Hadena bicruris eggs were observed on Silene latifolia plants treated with this insecticide compared with control plants, and the flowers of these insecticide-treated plants were less likely to be pollinated by moths. In addition, realistic field margin input rates of herbicides can also affect Lepidoptera. Ranunculus acris L. plants treated with sublethal rates of a sulfonylurea herbicide were used as host plants for Mamestra brassicae L. caterpillars, which resulted in significantly lower caterpillar weights, increased time to pupation, and increased overall development time compared with caterpillars feeding on control plants. These results might have been caused by lower nutritional value of the herbicide-treated plants or increased concentrations of secondary metabolites involved in plant defense. Fertilizer applications slightly increased the caterpillar abundance in the field experiment. However, fertilizers reduce plant diversity in the long term and thus, most likely, also reduce caterpillar diversity. Moths such as Noctuidae and Sphingidae have been observed to act as pollinators for numerous plant species, including a number of Orchidaceae and Caryophyllaceae. Although in temperate agro-ecosystems moths are less likely to act as the main pollinators for crops, they can pollinate non-crop plants in semi-natural habitats. Currently, the role of moths as pollinators appears to be underestimated, and long-term research focusing on ecosystems is necessary to address temporal fluctuations in their abundance and community composition. Lepidoptera represent a diverse organism group in agricultural landscapes and fulfill essential ecosystem services, such as pollination. To better protect moths and butterflies, agrochemical inputs to (narrow) field margins habitats should be reduced, for example, via risk mitigation measures and agro-environmental schemes.

Animationen können in instruktionalen Kontexten genutzt werden, um Wissen über Sachverhalte zu vermitteln, die Prozesse oder Abläufe beinhalten. So können dynamische Sachverhalte explizit dargestellt werden und müssen nicht vom Lerner selbst in Gedanken hergestellt, sondern nur anhand der Animation nachvollzogen werden. Dies sollte sich positiv auf den Wissenserwerb auswirken. Dabei stellen Animationen mit ihrer besonderen Eigenschaft der Darstellung zeitlicher Abläufe besondere Herausforderungen an den Lerner. Das menschliche Informationsverarbeitungssystem unterliegt bestimmten Begrenzungen im Hinblick auf die Wahrnehmung von Geschwindigkeiten. Zu schnelle und zu langsame Geschwindigkeiten können beispielsweise nur schwer wahrgenommen und dementsprechend auch nicht kognitiv verarbeitet werden. Die Zielsetzung der Arbeit, die sich daraus ergibt, war eine systematische Untersuchung der Wirkung unterschiedlicher Präsentationsgeschwindigkeiten auf das Wahrnehmen und Verstehen eines dynamischen Sachverhaltes anhand einer Animation. Um die Fragestellungen der Arbeit beantworten zu können, wurden vier experimentelle Studien durchgeführt. Die Pilotstudie hatte das Ziel, sowohl das Lernmaterial als auch den entwickelten Wissenstest zu evaluieren. In Studie 1 wurde der Frage nach dem Einfluss der Präsentationsgeschwindigkeit auf den Wissenserwerb beim Lernen mit einer interaktiven Animation nachgegangen. Die Studien 2 und 3 untersuchten den Einfluss verschiedener Reihenfolgen von Geschwindigkeiten auf den Wissenserwerb. Hier ging es um eine systematische Erfassung der perzeptuellen und kognitiven Verarbeitung dynamischer Informationen in zwei verschiedenen Geschwindigkeiten mittels Blickbewegungsmessung (Studie 2) und wiederholten Testungen des Wissenserwerbs zwischen den einzelnen Lernphasen (Studie 3). Die Ergebnisse der Studien deuten darauf hin, dass bei langsamer Geschwindigkeit Wissen über Ereignisse auf untergeordneter zeitlicher Ebene erworben wurde und dass je schneller eine Animation gesehen wurde, umso mehr anteiliges Wissen auf einer übergeordneten zeitlichen Ebene erworben wurde (Studie 1), aber eindeutige Aussagen über den Einfluss der Geschwindigkeit auf den Wissenserwerb auf verschiedenen zeitlichen Hierarchieebenen lassen sich aufgrund der Ergebnisse der Studien nicht machen. Im Hinblick auf die Lernförderlichkeit verschiedener Arten der Sequenzierung von Geschwindigkeiten zeigten sich auch keine eindeutigen Ergebnisse. Aufgrund der Analyse der Blickbewegungsdaten deutet sich jedoch an, dass die Reihenfolge "langsam - schnell" den Bedingungen auf Seiten der Lerner eher entgegen kommt als die Reihenfolge "schnell - langsam".

Business documents contain valuable information. In order to comply with legal requirements, to serve as organisational knowledge and to prevent risks they need to be managed. However, changes in technology with which documents are being produced introduced new kinds of documents and new ways of interacting with documents. Thereby, the web 2.0 led to the development of Enterprise Collaboration Systems (ECS), which enable employees to use wiki, blog or forum applications for conducting their business. Part of the content produced in ECS can be called Social Business Documents (SBD). Compared to traditional digital documents SBD are different in their nature and structure as they are, for example, less well-structured and do not follow a strict lifecycle. These characteristics bring along new management challenges. However, currently research literature lacks investigations on the characteristics of SBD, their peculiarities and management. This dissertation uses document theory and documentary practice as theoretical lenses to investigate the new challenges of the long-term management of SBD in ECS. By using an interpretative, exploratory, mixed methods approach the study includes two major research parts. First, the nature and structure of Social Business Documents is addressed by analysing them within four different systems using four different modelling techniques each. The findings are used to develop general SBD information models, outlining the basic underlying components, structure, functions and included metadata, as well as a broad range of SBD characteristics. The second phase comprises a focus group, a case study including in-depth interviews and a questionnaire, all conducted with industry representatives. The focus group identified that the kind of SBD used for specific content and the actual place of storage differ between organisations as well as that there are currently nearly no management practices for SBD at hand. The case study provided deep insights into general document management activities and investigated requirements, challenges and actions for managing SBD. Finally, the questionnaire consolidated and deepened the previous findings. It provides insights about the value of SBD, their current management practices as well as management challenges and needs. Despite all participating organisations storing information worth managing in SBD most are not addressing them with management activities and many challenges remain. Together, the investigations enable a contribution to practice and theory. The progress in practice is summarised through a framework, addressing the long-term management of Social Business Documents. The framework identifies and outlines the requirements and challenges of and the actions for SBD management. It also indicates the dependencies of the different aspects. Furthermore, the findings enable the progress in theory within documentary practice by discussing the extension of document types to include SBD. Existing problems are outlined along the definitions of records and the newly possible characteristics of documents emerging through Social Business Documents are taken into account.

Augmented reality (AR) applications typically extend the user's view of the real world with virtual objects. In recent years, AR has gained increasing popularity and attention, which has led to improvements in the required technologies. AR has become available to almost everyone. Researchers have made great progress towards the goal of believable AR, in which the real and virtual worlds are combined seamlessly. They mainly focus on issues like tracking, display technologies and user interaction, and give little attention to visual and physical coherence when real and virtual objects are combined. For example, virtual objects should not only respond to the user's input; they should also interact with real objects. Generally, AR becomes more believable and realistic if virtual objects appear fixed or anchored in the real scene, appear indistinguishable from the real scene, and response to any changes within it. This thesis examines on three challenges in the field of computer vision to meet the goal of a believable combined world in which virtual objects appear and behave like real objects. Firstly, the thesis concentrates on the well-known tracking and registration problem. The tracking and registration challenge is discussed and an approach is presented to estimate the position and viewpoint of the user so that virtual objects appear fixed in the real world. Appearance-based line models, which keep only relevant edges for tracking purposes, enable absolute registration in the real world and provide robust tracking. On the one hand, there is no need to spend much time creating suitable models manually. On the other hand, the tracking can deal with changes within the object or the scene to be tracked. Experiments have shown that the use of appearance-based line models improves the robustness, accuracy and re-initialization speed of the tracking process. Secondly, the thesis deals with the subject of reconstructing the surface of a real environment and presents an algorithm to optimize an ongoing surface reconstruction. A complete 3D surface reconstruction of the target scene offers new possibilities for creating more realistic AR applications. Several interactions between real and virtual objects, such as collision and occlusions, can be handled with physical correctness. Whereas previous methods focused on improving surface reconstructions offline after a capturing step, the presented method de-noises, extends and fills holes during the capturing process. Thus, users can explore an unknown environment without any preparation tasks such as moving around and scanning the scene, and without having to deal with the underlying technology in advance. In experiments, the approach provided realistic results where known surfaces were extended and filled in plausibly for different surface types. Finally, the thesis focuses on handling occlusions between the real and virtual worlds more realistically, by re-interpreting the occlusion challenge as an alpha matting problem. The presented method overcomes limitations in state-of-the-art methods by estimating a blending coefficient per pixel of the rendered virtual scene, instead of calculating only their visibility. In several experiments and comparisons with other methods, occlusion handling through alpha matting worked robustly and overcame limitations of low-cost sensor data; it also outperformed previous work in terms of quality, realism and practical applicability. The method can deal with noisy depth data and yields realistic results in regions where foreground and background are not strictly separable (e.g. caused by fuzzy objects or motion blur).

We are living in a world where environmental crises come to a head. To curb aggravation of these problems, a socio-ecological transformation within society is needed, going along with human behavior change. How to encourage such behavior changes on an individual level is the core issue of this dissertation. It takes a closer look at the role of individuals as consumers resulting in purchase decisions with more or less harmful impact on the environment. By using the example of plastic pollution, it takes up a current environmental problem and focuses on an understudied behavioral response to this problem, namely reduction behavior. More concrete, this dissertation examines which psychological factors can encourage the mitigation of plastic packaging consumption. Plastic packaging accounts for the biggest amount of current plastic production and is associated with products of daily relevance. Despite growing awareness of plastic pollution in society, behavioral responses do not follow accordingly and plastic consumption is still very high. As habits are often a pitfall when implementing more resource-saving behavior, this dissertation further examines if periods of discontinuity can open a ’window of opportunity’ to break old habits and facilitate behavior change. Four manuscripts approach this matter from the gross to the subtle. Starting with a literature review, a summary of 187 studies addresses the topic of plastic pollution and human behavior from a societal-scientific perspective. Based on this, a cross-sectional study (N = 648) examines the deter-minants of plastic-free behavior intentions in the private-sphere and public-sphere by structural equation modeling. Two experimental studies in pre-post design build upon this, by integrating the determinants in intervention studies. In addition, it was evaluated if the intervention presented during Lent (N = 140) or an action month of ‘Plastic Free July’ (N = 366) can create a ‘window of opportunity’ to mitigate plastic packaging consumption. The literature review emphasized the need for research on behavioral solutions to reduce plastic consumption. The empirical results revealed moral and control beliefs to be the main determinants of reduction behavior. Furthermore, the time point of an intervention influenced the likelihood to try out the new behavior. The studies gave first evidence that a ‘window of opportunity’ can facilitate change towards pro-environmental behavior within the application field of plastic consumption. Theoretical and practical implications of creating the right opportunity for individuals to contribute to a socio-ecological transformation are finally discussed.

Scientific and public interest in epidemiology and mathematical modelling of disease spread has increased significantly due to the current COVID-19 pandemic. Political action is influenced by forecasts and evaluations of such models and the whole society is affected by the corresponding countermeasures for containment. But how are these models structured? Which methods can be used to apply them to the respective regions, based on real data sets? These questions are certainly not new. Mathematical modelling in epidemiology using differential equations has been researched for quite some time now and can be carried out mainly by means of numerical computer simulations. These models are constantly being refinded and adapted to corresponding diseases. However, it should be noted that the more complex a model is, the more unknown parameters are included. A meaningful data adaptation thus becomes very diffcult. The goal of this thesis is to design applicable models using the examples of COVID-19 and dengue, to adapt them adequately to real data sets and thus to perform numerical simulations. For this purpose, first the mathematical foundations are presented and a theoretical outline of ordinary differential equations and optimization is provided. The parameter estimations shall be performed by means of adjoint functions. This procedure represents a combination of static and dynamical optimization. The objective function corresponds to a least squares method with L2 norm which depends on the searched parameters. This objective function is coupled to constraints in the form of ordinary differential equations and numerically minimized, using Pontryagin's maximum (minimum) principle and optimal control theory. In the case of dengue, due to the transmission path via mosquitoes, a model reduction of an SIRUV model to an SIR model with time-dependent transmission rate is performed by means of time-scale separation. The SIRUV model includes uninfected (U) and infected (V ) mosquito compartments in addition to the susceptible (S), infected (I) and recovered (R) human compartments, known from the SIR model. The unknwon parameters of the reduced SIR model are estimated using data sets from Colombo (Sri Lanka) and Jakarta (Indonesia). Based on this parameter estimation the predictive power of the model is checked and evaluated. In the case of Jakarta, the model is additionally provided with a mobility component between the individual city districts, based on commuter data. The transmission rates of the SIR models are also dependent on meteorological data as correlations between these and dengue outbreaks have been demonstrated in previous data analyses. For the modelling of COVID-19 we use several SEIRD models which in comparison to the SIR model also take into account the latency period and the number of deaths via exposed (E) and deaths (D) compartments. Based on these models a parameter estimation with adjoint functions is performed for the location Germany. This is possible because since the beginning of the pandemic, the cumulative number of infected persons and deaths are published daily by Johns Hopkins University and the Robert-Koch-Institute. Here, a SEIRD model with a time delay regarding the deaths proves to be particularly suitable. In the next step, this model is used to compare the parameter estimation via adjoint functions with a Metropolis algorithm. Analytical effort, accuracy and calculation speed are taken into account. In all data fittings, one parameter each is determined to assess the estimated number of unreported cases.

For software engineers, conceptually understanding the tools they are using in the context of their projects is a daily challenge and a prerequisite for complex tasks. Textual explanations and code examples serve as knowledge resources for understanding software languages and software technologies. This thesis describes research on integrating and interconnecting existing knowledge resources, which can then be used to assist with understanding and comparing software languages and software technologies on a conceptual level. We consider the following broad research questions that we later refine: What knowledge resources can be systematically reused for recovering structured knowledge and how? What vocabulary already exists in literature that is used to express conceptual knowledge? How can we reuse the online encyclopedia Wikipedia? How can we detect and report on instances of technology usage? How can we assure reproducibility as the central quality factor of any construction process for knowledge artifacts? As qualitative research, we describe methodologies to recover knowledge resources by i.) systematically studying literature, ii.) mining Wikipedia, iii.) mining available textual explanations and code examples of technology usage. The theoretical findings are backed by case studies. As research contributions, we have recovered i.) a reference semantics of vocabulary for describing software technology usage with an emphasis on software languages, ii.) an annotated corpus of Wikipedia articles on software languages, iii.) insights into technology usage on GitHub with regard to a catalog of pattern and iv.) megamodels of technology usage that are interconnected with existing textual explanations and code examples.

We consider variational discretization of three different optimal control problems. The first being a parabolic optimal control problem governed by space-time measure controls. This problem has a nice sparsity structure, which motivates our aim to achieve maximal sparsity on the discrete level. Due to the measures on the right hand side of the partial differential equation, we consider a very weak solution theory for the state equation and need an embedding into the continuous functions for the pairings to make sense. Furthermore, we employ Fenchel duality to formulate the predual problem and give results on solution theory of both the predual and the primal problem. Later on, the duality is also helpful for the derivation of algorithms, since the predual problem can be differentiated twice so that we can apply a semismooth Newton method. We then retrieve the optimal control by duality relations. For the state discretization we use a Petrov-Galerkin method employing piecewise constant states and piecewise linear and continuous test functions in time. For the space discretization we choose piecewise linear and continuous functions. As a result the controls are composed of Dirac measures in space-time, centered at points on the discrete space-time grid. We prove that the optimal discrete states and controls converge strongly in L^q and weakly-* in Μ, respectively, to their smooth counterparts, where q ϵ (1,min{2,1+2/d}] is the spatial dimension. The variational discrete version of the state equation with the above choice of spaces yields a Crank-Nicolson time stepping scheme with half a Rannacher smoothing step. Furthermore, we compare our approach to a full discretization of the corresponding control problem, precisely a discontinuous Galerkin method for the state discretization, where the discrete controls are piecewise constant in time and Dirac measures in space. Numerical experiments highlight the sparsity features of our discrete approach and verify the convergence results. The second problem we analyze is a parabolic optimal control problem governed by bounded initial measure controls. Here, the cost functional consists of a tracking term corresponding to the observation of the state at final time. Instead of a regularization term for the control in the cost functional, we consider a bound on the measure norm of the initial control. As in the first problem we observe a sparsity structure, but here the control resides only in space at initial time, so we focus on the space discretization to achieve maximal sparsity of the control. Again, due to the initial measure in the partial differential equation, we rely on a very weak solution theory of the state equation. We employ a dG(0) approximation of the state equation, i.e. we choose piecewise linear and continuous functions in space, which are piecewise constant in time for our ansatz and test space. Then, the variational discretization of the problem together with the optimality conditions induce maximal discrete sparsity of the initial control, i.e. Dirac measures in space. We present numerical experiments to illustrate our approach and investigate the sparsity structure As third problem we choose an elliptic optimal control governed by functions of bounded variation (BV) in one space dimension. The cost functional consists of a tracking term for the state and a BV-seminorm in terms of the derivative of the control. We derive a sparsity structure for the derivative of the BV control. Additionally, we utilize the mixed formulation for the state equation. A variational discretization approach with piecewise constant discretization of the state and piecewise linear and continuous discretization of the adjoint state yields that the derivative of the control is a sum of Dirac measures. Consequently the control is a piecewise constant function. Under a structural assumption we even get that the number of jumps of the control is finite. We prove error estimates for the variational discretization approach in combination with the mixed formulation of the state equation and confirm our findings in numerical experiments that display the convergence rate. In summary we confirm the use of variational discretization for optimal control problems with measures that inherit a sparsity. We are able to preserve the sparsity on the discrete level without discretizing the control variable.

Water scarcity is already an omnipresent problem in many parts of the world, especially in sub-Saharan Africa. The dry years 2018 and 2019 showed that also in Germany water resources are finite. Projections and predictions for the next decades indicate that renewal rates of existing water resources will decline due the growing influence of climate change, but that water extraction rates will increase due to population growth. It is therefore important to find alternative and sustainable methods to make optimal use of the water resources currently available. For this reason, the reuse of treated wastewater for irrigation and recharge purposes has become one focus of scientific research in this field. However, it must be taken into account that wastewater contains so-called micropollutants, i.e., substances of anthropogenic origin. These are, e.g., pharmaceuticals, pesticides and industrial chemicals which enter the wastewater, but also metabolites that are formed in the human body from pharmaceuticals or personal care products. Through the treatment in wastewater treatment plants (WWTPs) as well as through chemical, biological and physical processes in the soil passage during the reuse of water, these micropollutants are transformed to new substances, known as transformation products (TPs), which further broaden the number of contaminants that can be detected within the whole water cycle. Despite the fact that the presence of human metabolites and environmental TPs in untreated and treated wastewater has been known for a many years, they are rarely included in common routine analysis methods. Therefore, a first goal of this thesis was the development of an analysis method based on liquid chromatography - tandem mass spectrometry (LC-MS/MS) that contains a broad spectrum of frequently detected micropollutants including their known metabolites and TPs. The developed multi-residue analysis method contained a total of 80 precursor micropollutants and 74 metabolites and TPs of different substance classes. The method was validated for the analysis of different water matrices (WWTP influent and effluent, surface water and groundwater from a bank filtration site). The influence of the MS parameters on the quality of the analysis data was studied. Despite the high number of analytes, a sufficient number of datapoints per peak was maintained, ensuring a high sensitivity and precision as well as a good recovery for all matrices. The selection of the analytes proved to be relevant as 95% of the selected micropollutants were detected in at least one sample. Several micropollutants were quantified that were not in the focus of other current multi-residue analysis methods (e.g. oxypurinol). The relevance of including metabolites and TPs was demonstrated by the frequent detection of, e.g., clopidogrel acid and valsartan acid at higher concentrations than their precursors, the latter even being detected in samples of bank filtrate water. By the integration of metabolites, which are produced in the body by biological processes, and biological and chemical TPs, the multi-residue analysis method is also suitable for elucidating degradation mechanisms in treatment systems for water reuse that, e.g., use a soil passage for further treatment. In the second part of the thesis, samples from two treatment systems based on natural processes were analysed: a pilot-scale above-ground sequential biofiltration system (SBF) and a full-scale soil aquifer treatment (SAT) site. In the SBF system mainly biological degradation was observed, which was clearly demonstrated by the detection of biological TPs after the treatment. The efficiency of the degradation was improved by an intermediate aeration, which created oxic conditions in the upper layer of the following soil passage. In the SAT system a combination of biodegradation and sorption processes occurred. By the different behaviour of some biodegradable micropollutants compared to the SBF system, the influence of redox conditions and microbial community was observed. An advantage of the SAT system over the SBF system was found in the sorption capacity of the natural soil. Especially positively charged micropollutants showed attenuation due to ionic interactions with negatively charged soil particles. Based on the physicochemical properties at ambient pH, the degree of removal in the investigated systems and the occurrence in the source water, a selection of process-based indicator substances was proposed. Within the first two parts of this thesis a micropollutant was frequently detected at elevated concentrations in WWTPs effluents, which was not previously in the focus of environmental research: the antidiabetic drug sitagliptin (STG). STG showed low degradability in biological systems and thus it was investigated to what extend chemical treatment by ozonation can ensure attenuation of it. STG contains an aliphatic primary amine as the principal point of attack for the ozone molecule. There is only limited information about the behaviour of this functional group during ozonation and thus, STG served as an example for other micropollutants containing aliphatic primary amines. A pH-dependent degradation kinetic was observed due to the protonation of the primary amine at lower pH values. At pH values in the range 6 - 8, which is typical for the environment and in WWTPs, STG showed degradation kinetics in the range of 103 M-1s-1 and thus belongs to the group of readily degradable substances. However, complete degradation can only be expected at significantly higher pH values (> 9). The transformation of the primary amine moiety into a nitro group was observed as the major degradation mechanism for STG during ozonation. Other mechanisms involved the formation of a diketone, bond breakages and the formation of trifluoroacetic acid (TFA). Investigations at a pilot-scale ozonation plant using the effluent of a biological degradation of a municipal WWTP as source water confirmed the results of the laboratory studies: STG could not be removed completely even at high ozone doses and the nitro compound was formed as the main TP and remained stable during further ozonation and subsequent biological treatment. It can therefore be assumed that under realistic conditions both a residual concentration of STG and the formed main TP as well as other stable TPs such as TFA can be detected in the effluents of a WWTP consisting of conventional biological treatment followed by ozonation and subsequent biological polishing steps.

In this thesis we examined the question whether personality traits of early child care workers influence process quality in preschool. Research has shown that in educational settings such as preschool, pedagogical quality affects children’s developmental outcome (e.g. NICHD, 2002; Peisner-Feinberg et al., 1999). A substantial part of pedagogical quality known to be vital in this respect is the interaction between teacher and children (e.g., Tietze, 2008). Results of prior classroom research indicate that the teachers’ personality might be an important factor for good teacher-child-interaction (Mayr, 2011). Thus, personality traits might play a vital role for the interaction in preschool. Therefore, the aims of this thesis were to a) identify pivotal personality traits of child care workers, b) assess ideal levels of the identified personality traits and c) examine the relationship between pivotal personality traits and process quality. On that account, we conducted two requirement analyses and a video study. The results of these studies showed that subject matter experts (parents, child care workers, lecturers) partly agreed as to which personality traits are pivotal for child care workers. Furthermore, the experts showed high consensus with regard to the minimum, ideal and maximum personality trait profiles. Furthermore, child care workers whose profiles lay closer to the experts’ ideal also showed higher process quality. In addition, regression analyses showed that the child care workers’ levels of the Big Two (Communion and Agency) related significantly to their process quality.

Purpose: Leader-follower communication plays an important role in all organizations. However, research on school leadership did not focus on communication competency (CC) and its impact on school quality (e.g. on teachers' commitment, job satisfaction) so far; there is a striking lack of theory and empirical data. Therefore, this paper describes the development and validation of a standardized measure for CC of school principals. It is based on a theoretical framework with LMX as a communication-based approach to leadership and an interpersonal communication process model. Design/Methodology: CC was conceptualized as a 3-dimensional construct. Five studies were conducted with German teachers and school principals from all types of schools (total N=1649): selection of items via expert ratings, exploring the dimensionality, cross-validation of the structure, test-retest-reliability, external validity. Results: Analyses led to a 3-factor solution - Altercentrism, Knowledge and Willingness to Communicate, Self-Regulation - with 14 items and good internal consistencies. CFA, exploring the nomological network, and invariance measurement supported construct validity. Limitations: Empirical studies still have to be conducted to evaluate the application in other leader - follower contexts apart from school. Research/Practical Implications: The measure and the theoretical framework can be applied for analyzing principal - teacher interactions in detail and for detecting problems in communication processes. The measure can also be used for feedback processes and for demand-oriented trainings.Originality/Value: For the first time, this paper explicitly combines the concepts of CC and leadership in schools and provides a measure within a theoretical framework to assess principals' CC. Such a valid instrument is the prerequisite for further investigating the importance of CC in the context of (school) leadership.