Refine
Year of publication
Document Type
- Bachelor Thesis (100)
- Diploma Thesis (81)
- Study Thesis (76)
- Master's Thesis (46)
- Doctoral Thesis (18)
- Part of Periodical (12)
- Conference Proceedings (3)
Language
- German (282)
- English (52)
- Multiple languages (2)
Keywords
- Bildverarbeitung (16)
- Augmented Reality (13)
- Robotik (10)
- Computergrafik (9)
- Computergraphik (9)
- Computervisualistik (9)
- OpenGL (8)
- GPGPU (5)
- GPU (5)
- Line Space (5)
Institute
- Institut für Computervisualistik (336) (remove)
With the appearance of modern virtual reality (VR) headsets on the consumer market, there has been the biggest boom in the history of VR technology. Naturally, this was accompanied by an increasing focus on the problems of current VR hardware. Especially the control in VR has always been a complex topic.
One possible solution is the Leap Motion, a hand tracking device that was initially developed for desktop use, but with the last major software update it can be attached to standard VR headsets. This device allows very precise tracking of the user’s hands and fingers and their replication in the virtual world.
The aim of this work is to design virtual user interfaces that can be operated with the Leap Motion to provide a natural method of interaction between the user and the VR environment. After that, subject tests are performed to evaluate their performance and compare them to traditional VR controllers.
The present thesis gives an overview of the general conditions for the programming of graphics cards. For this purpose, the most important Application Programming Interfaces (APIs) available on the market are presented and compared. Subsequently, two standard algorithms from the field data processing, prefix sum and radixsort are presented and examined with regard to the implementation with parallel programming on the GPU. Both algorithms were implemented using the OpenGL-API and OpenGL compute shaders. Finally, the execution times of the two algorithms were compared.
Analyse TV-basierter Interaktion für Senioren: Umsetzung und Evaluation im Gesundheitsbereich
(2007)
Einer der Forschungsschwerpunkte der AG Rechnernetze ist das Routing Information Protocol. Eine eigene kompatible Erweiterung dieses Routingprotokolls ist der Routing Information Protocol with Metric-based Topology Investigation (RMTI [ehemals RIP-MTI]). Um dieses Protokoll testen und mit seinem Vorgänger vergleichen zu können, wird die Virtualisierungssoftware VNUML eingesetzt. In diesen virtualisierten Netzwerken werden Router, die das RMTI-Protokoll einsetzten, mittels der Zebra/Quagga Routing Software Suite beobachtet. Dabei wird das Verhalten des Protokolls in unterschiedlichsten Simulationssituationen analysiert und bewertet. Um solche Testabläufe zentral zu steuern und protokollieren zu können wurde die Anwendung RIP-XT (XTPeer) erstellt und in fortführenden Diplomarbeiten kontinuierlich erweitert. Sie ist Schnittstelle zu den Zebra/Quagga-Routern und kann diese steuern. Zusätzlich sammelt und analysiert sie die Routing-Informationen der Router.Über ein GUI kann ein Benutzer diese Abläufe steuern. Um einen visuellen Überblick über eine Netzwerktopologie zu erhalten, besitzt das GUI auch eine Topologie-Anzeige. Die Anzeige repräsentiert das Gesamte Netzwerk durch Symbole, über die auch Interaktionen mit der Simulation möglich sind. Ziel dieser Diplomarbeit war es, die bisherige Topologie-Anzeige zu überarbeiten, um sie für neue Anforderungen anzupassen. Des weiteren wurden funktionale Erweiterungen in das GUI des RIP-XTs eingebettet.
This thesis addresses the automated identification and localization of a time-varying number of objects in a stream of sensor data. The problem is challenging due to its combinatorial nature: If the number of objects is unknown, the number of possible object trajectories grows exponentially with the number of observations. Random finite sets are a relatively new theory that has been developed to derive at principled and efficient approximations. It is based around set-valued random variables that contain an unknown number of elements which appear in arbitrary order and are themselves random. While extensively studied in theory, random finite sets have not yet become a leading paradigm in practical computer vision and robotics applications. This thesis explores random finite sets in visual tracking applications. The first method developed in this thesis combines set-valued recursive filtering with global optimization. The problem is approached in a min-cost flow network formulation, which has become a standard inference framework for multiple object tracking due to its efficiency and optimality. A main limitation of this formulation is a restriction to unary and pairwise cost terms. This circumstance makes integration of higher-order motion models challenging. The method developed in this thesis approaches this limitation by application of a Probability Hypothesis Density filter. The Probability Hypothesis Density filter was the first practically implemented state estimator based on random finite sets. It circumvents the combinatorial nature of data association itself by propagation of an object density measure that can be computed efficiently, without maintaining explicit trajectory hypotheses. In this work, the filter recursion is used to augment measurements with an additional hidden kinematic state to be used for construction of more informed flow network cost terms, e.g., based on linear motion models. The method is evaluated on public benchmarks where a considerate improvement is achieved compared to network flow formulations that are based on static features alone, such as distance between detections and appearance similarity. A second part of this thesis focuses on the related task of detecting and tracking a single robot operator in crowded environments. Different from the conventional multiple object tracking scenario, the tracked individual can leave the scene and later reappear after a longer period of absence. Therefore, a re-identification component is required that picks up the track on reentrance. Based on random finite sets, the Bernoulli filter is an optimal Bayes filter that provides a natural representation for this type of problem. In this work, it is shown how the Bernoulli filter can be combined with a Probability Hypothesis Density filter to track operator and non-operators simultaneously. The method is evaluated on a publicly available multiple object tracking dataset as well as on custom sequences that are specific to the targeted application. Experiments show reliable tracking in crowded scenes and robust re-identification after long term occlusion. Finally, a third part of this thesis focuses on appearance modeling as an essential aspect of any method that is applied to visual object tracking scenarios. Therefore, a feature representation that is robust to pose variations and changing lighting conditions is learned offline, before the actual tracking application. This thesis proposes a joint classification and metric learning objective where a deep convolutional neural network is trained to identify the individuals in the training set. At test time, the final classification layer can be stripped from the network and appearance similarity can be queried using cosine distance in representation space. This framework represents an alternative to direct metric learning objectives that have required sophisticated pair or triplet sampling strategies in the past. The method is evaluated on two large scale person re-identification datasets where competitive results are achieved overall. In particular, the proposed method better generalizes to the test set compared to a network trained with the well-established triplet loss.
MP3 Player for Nintendo DS
(2007)
Ziel der Arbeit ist es, einen MP3-Player zu entwickeln, der eine Benutzerinteraktion ermöglicht, wie es gängige Computerprogramme zur Wiedergabe von Musik tun. Der Benutzer soll über eine grafische Oberfläche MP3-Dateien laden, abspielen und in Playlisten organisieren können. Ferner soll es möglich sein, Metadaten wie Titel, Autor, Genre, Veröffentlichungsjahr und vieles weitere als zusätzlichen Tag zu speichern und zu editieren. Diese Informationen soll die Software auch beim Abspielen eines Musikstückes auslesen und dem Nutzer übersichtlich anzeigen. Hier scheitern die meisten Player aufgrund ihres kleinen Displays. Außerdem soll der MP3-Player auch rudimentäre Funktionen zur Echtzeitmanipulation der Musikwiedergabe bieten. Als Hardware zum Abspielen der Musikdateien dient die Spielekonsole Nintendo DS, welche aufgrund ihrer beiden Displays genügend Anzeigemöglichkeiten für eine grafische Benutzerführung bietet. Eines der beiden Displays dient zudem als Touchscreen und kann für Eingaben verwendet werden.
The automatic detection of position and orientation of subsea cables and pipelines in camera images enables underwater vehicles to make autonomous inspections. Plants like algae growing on top and nearby cables and pipelines however complicate their visual detection: the determination of the position via border detection followed by line extraction often fails. Probabilistic approaches are here superior to deterministic approaches. Through modeling probabilities it is possible to make assumptions on the state of the system even if the number of extracted features is small. This work introduces a new tracking system for cable/pipeline following in image sequences which is based on particle filters. Extensive experiments on realistic underwater videos show robustness and performance of this approach and demonstrate advantages over previous works.
Autonomous exhaustive exploration of unknown indoor environments with the mobile robot "Robbie"
(2007)
Rettungsroboter helfen nach Katastrophen wie z.B. Erdbeben dabei, in zerstörten Gebäuden Überlebende zu finden. Die Aufgabe, die Umgebung effizient möglichst vollständig abzusuchen und dabei eine Karte zu erstellen, die den Rettungskräften bei der Bergung der Opfer zur Orientierung dient, soll der Roboter autonom erfüllen. Hierzu wird eine Explorationsstrategie benötigt; eine Strategie zur Navigation in bekanntem und zur Erkundung von unbekanntem Gelände. Für den mobilen Roboter "Robbie" der Arbeitsgruppe Aktives Sehen wurde in dieser Arbeit ein Grenzen-basierter Ansatz zur Lösung des Explorationsproblems ausgewählt und implementiert. Hierzu werden Grenzen zu unbekanntem Gelände aus der Karte, die der Roboter erstellt, extrahiert und angefahren. Grundlage der Navigation zu einem so gefundenen Wegpunkt bildet die sog. Pfad-Transformation (Path-Transform).
Wie bereitet man komplizierte, technische Sachverhalte einfach und verständlich auf, damit sie auch der normalen Benutzer ohne tiefergehendes technisches Hintergrundwissen schnell und ohne lange Einarbeitungszeit und langwierige Erklärungen zu nutzen weiß? In dieser Studenarbeit geht es um genau diese Frage - Nichtinformatikern die Vorzüge und die Arbeit mit semantischen (Such)anfragen zu erleichtern, wenn nicht sogar überhaupt erst zu ermöglichen, sowie die Neuentwicklung und SPARQL-Erweiterung Networked Graphs von Simon Schenk innerhalb der AG Staab/Universität Koblenz zu präsentieren.
In dieser Arbeit wird ein System zur Erzeugung und Darstellung stereoskopischen Video-Panoramen vorgestellt. Neben der theoretischen Grundlagen werden der Aufbau und die Funktionsweise dieses Systems erläutert.
Dazu werden spezielle Kameras verwendet, die Panoramen aufnehmen
können und zur Wiedergabe synchronisiert werden. Anschließend wird ein Renderer implementiert, welcher die Panoramen mithilfe einer VirtualReality Brille stereoskopisch darstellen kann. Dafür werden separate Aufnahmen für die beiden Augen gemacht und getrennt wiedergegeben. Zum Abschluss wird das entstandene Video-Panorama mit einem Panorama eines schon bestehenden Systems verglichen.
Der Wettbewerb um die besten Technologien zur Realisierung des autonomen Fahrens ist weltweit in vollem Gange.
Trotz großer Anstrengungen ist jedoch die autonome Navigation in strukturierter und vor allem unstrukturierter Umgebung bisher nicht gelöst.
Ein entscheidender Baustein in diesem Themenkomplex ist die Umgebungswahrnehmung und Analyse durch passende Sensorik und entsprechende Sensordatenauswertung.
Insbesondere bildgebende Verfahren im Bereich des für den Menschen sichtbaren Spektrums finden sowohl in der Praxis als auch in der Forschung breite Anwendung.
Dadurch wird jedoch nur ein Bruchteil des elektromagnetischen Spektrums genutzt und folglich ein großer Teil der verfügbaren Informationen zur Umgebungswahrnehmung ignoriert.
Um das vorhandene Spektrum besser zu nutzen, werden in anderen Forschungsbereichen schon seit Jahrzehnten \sog spektrale Sensoren eingesetzt, welche das elektromagnetische Spektrum wesentlich feiner und in einem größeren Bereich im Vergleich zu klassischen Farbkameras analysieren. Jedoch können diese Systeme aufgrund technischer Limitationen nur statische Szenen aufnehmen. Neueste Entwicklungen der Sensortechnik ermöglichen nun dank der \sog Snapshot-Mosaik-Filter-Technik die spektrale Abtastung dynamischer Szenen.
In dieser Dissertation wird der Einsatz und die Eignung der Snapshot-Mosaik-Technik zur Umgebungswahrnehmung und Szenenanalyse im Bereich der autonomen Navigation in strukturierten und unstrukturierten Umgebungen untersucht. Dazu wird erforscht, ob die aufgenommen spektralen Daten einen Vorteil gegenüber klassischen RGB- \bzw Grauwertdaten hinsichtlich der semantischen Szenenanalyse und Klassifikation bieten.
Zunächst wird eine geeignete Vorverarbeitung entwickelt, welche aus den Rohdaten der Sensorik spektrale Werte berechnet. Anschließend wird der Aufbau von neuartigen Datensätzen mit spektralen Daten erläutert. Diese Datensätze dienen als Basis zur Evaluation von verschiedenen Klassifikatoren aus dem Bereich des klassischen maschinellen Lernens.
Darauf aufbauend werden Methoden und Architekturen aus dem Bereich des Deep-Learnings vorgestellt. Anhand ausgewählter Architekturen wird untersucht, ob diese auch mit spektralen Daten trainiert werden können. Weiterhin wird die Verwendung von Deep-Learning-Methoden zur Datenkompression thematisiert. In einem nächsten Schritt werden die komprimierten Daten genutzt, um damit Netzarchitekturen zu trainieren, welche bisher nur mit RGB-Daten kompatibel sind. Abschließend wird analysiert, ob die hochdimensionalen spektralen Daten bei der Szenenanalyse Vorteile gegenüber RGB-Daten bieten
In this work has been examined, how the existing model of the simulation of cables and hoses can be advanced. Therefore an investigation has been made on the main influences to the shape simulation and the factors of constraints and side conditions were analyzed. For the validation of the accuracy, the simulation has to be compared to real specimen behavior. To obtain a very precise digitalization of the shape, the choice was made to use a laser scanner that converts the pointcloud into a .vrml file which can be imported into the simulation environment. The assumption was that the simulation method itself has the highest impact to the simulated shape. This is why the capabilities of the most sophisticated methods have been analyzed. The main criterion for the success of a simulation approach proved not to be accuracy, as expected. Process integration and usability showed to be of higher interest for the efficient exertion. Other factors like the pricing, the functionality and the real-time capability were assayed as well. The analyzed methods are based on the solution of the equations of elasticity with different ways of discetization, finite-elements and a spring-impulse-system. Since the finite-element-system takes several minutes for the computation of the shape and the spring-impulse-system reacts retarded on user manipulation, the competitiveness of these approaches is low. The other methods distinguish more in real-time performance, data interfaces and functionality than in accuracy. For the accuracy of a system, the consideration of other factors proved to be very important. As one of these main factors, the accurate assignment of the material properties was indicated. Until the start of this work, only the finite-element-approach dealt with this factor, but no documentation or validation is provided. In the publications of the other methods, the material properties are estimated to obtain a plausible simulation shape. Therefore the specific material values of real specimen have been measured and assigned to the simulation. With the comparison to the real shape it has been proven that the accuracy is very high with the measured properties. Since these measurements are very costly and time consuming, an investigation on a faster and cheaper way to obtain these values has been made. It has been assumed that with the knowledge of the cross-section it should be possible to compute the specimen behavior. Since the braid distribution changes individually from specimen to specimen, a more general way to obtain the values needed to be found. The program composer has been developed, where only the number of the different braids and the taping is entered. It computes with very high precision the stiffness, the density and the final diameter of the bundle. With the measured values and the fitting to the real shape it has been proven that the simulation approach reflects the precise behavior of cables and hoses. Since the stiffness of the single braids is wasteful to measure, a measurement setup was created where the stiffness has a large impact to the shape. With known density, the stiffness of the specimen can be reconstructed precisely. Thus a fast and beneficial way of obtaining the stiffness of a cable has been invented. The poissons ratio of cables and bundles cannot be measured with a tensile test, since the inner structure is very complex. For hoses, the variation of the inner diameter has been measured during the tensile test as well. The resulting values were reasonable, but their accuracy could not be proven. For cables and hoses, it has been tried to obtain the poissons ratio via the computation of the cross section, but the influence of individual changes and the crosstalk of the braids is very high. Therefore a setup was constructed where the torsion stiffness can be measured. For cables and hoses, the individual cross-sections and taping lead to varying results. For hoses, expected and repeatable good values for the poissons ratio were obtained. The low influence of the poisons ratio in the range between 0 and 0.5 has been proven. Therefore we decided to follow the advice of [Old06] and our own experiences to set the poisons ratio for cables and bundles to 0.25. With the knowledge of the measurability and the capabilities of the developed program composer, a procedure to obtain material properties for bundles has been designed. 1. Measurement of the braid density with via pyknometer or mass, length and diameter. 2. Empirical reconstruction of the stiffness with the designed setup. 3. Composing the bundle with the program composer. 4. Adding a factor for the taping and transfer the values to the simulation. The model of the cable simulation has been improved as follows: The main influences in the simulation of cables and hoses are the simulation method, the material properties and the geometric constraints. To obtain higher accuracy, an investigation on the correct material properties is indispensable. The scientific determination of material properties for the simulation of cables, bundles and hoses has been performed for the first time. The influence of geometrical constraints has been analyzed and documented. The next steps are the analysis of pre-deformation and further investigations to the determination of the poisons ratio with a more precise torsion test. All analysis were made with the simulation approach fleXengine. A comparison to other simulation methods would be of high interest.
Clubs, such as Scouts, rely on the work of their volunteer members, who have a variety of tasks to accomplish. Often there are sudden changes in their organization teams and offices, whereby planning steps are lost and inexperience in planning occurs. Since the special requirements are not covered by already existing tools, ScOuT, a planning tool for the organization administration, is designed and developed in this work to support clubs with regard to the mentioned problems. The focus was on identifying and using various suitable guidelines and heuristic methods to create a usable interface. The developed product was evaluated empirically by a user survey in terms of usability.
The result of this study shows that already a high degree of the desired goal could be reached by the inclusion of the guidelines and methods. From this it can be concluded that with the help of user-specific concept ideas and the application of suitable guidelines and methods, a suitable basis for a usable application to support clubs can be created.
Mit der Microsoft Kinect waren die ersten Aufnahmen von synchronisierten Farb- und Tiefendaten (RGB-D) möglich, ohne hohe finanzielle Mittel aufwenden zu müssen und neue Möglichkeiten der Forschung eröffneten sich. Mit fortschreitender Technik sind auch mobile Endgeräte in der Lage, immer mehr zu leisten. Lenovo und Asus bieten die ersten kommerziell erwerblichen Geräte mit RGB D-Wahrnehmung an. Mit integrierten Funktionen der Lokalisierung, Umgebungserkennung und Tiefenwahrnehmung durch die Plattform Tango von Google gibt es bereits die ersten Tests in verschiedenen Bereichen des Rechnersehens z.B. Mapping. In dieser Arbeit wird betrachtet, inwiefern sich ein Tango Gerät für die Objekterkennung eignet. Aus den Ausgangsdaten des Tango Geräts werden RGB D-Daten extrahiert und für die Objekterkennung verarbeitet. Es wird ein Überblick über den aktuellen Stand der Forschung und gewisse Grundlagen bezüglich der Tango Plattform gegeben. Dabei werden existierende Ansätze und Methoden für eine Objekterkennung auf mobilen Endgeräten untersucht. Die Implementation der Erkennung wird anhand einer selbst erstellten Datenbank von RGB-D Bildern gelernt und getestet. Neben der Vorstellung der Ergebnisse werden Verbesserungen und Erweiterungen für die Erkennung vorgeschlagen.
Online Handschrifterkennung chinesischer Schriftzeichen auf androidfähigen mobilen Endgeräten
(2014)
Usage of mobile dictionaries or translators requires an input. This input has to be processed and recognized beforehand. Chinese characters are more suited for a handwritten input than a keyboard based one. Reason for that are the characters consisting mostly of pictograms or ideograms.
This thesis deals with an implementation of a prototypical recognition system on a mobile device. The recognition process should be online and therefore running while writing. It can save time for the user, because suggestions are made during runtime.
Basics and an overview over the current state of the art in online handwriting recognition will be given. An approach will be chosen and implemented, such that the recognition process is fast and needs little memory. The implementation will be tested and it will show, that a fast recognition can be possible on small devices. Suggestions for expansions and improvements will be given, including a future work part.
Ein Werkzeug zur schnellen Erstellung individueller Schriftarten für die jeweiligen akuten Bedürfnisse wäre ein hilfreiches Instrument für Grafiker und Typographen. Die Anforderung für ein solches Instrument kann kaum sein, gute Schriftsätze zu erzeugen, dies liegt in den Händen des Gestalters, jedoch sollte sie jedem, der sich mit dem Thema befassen möchte, einen leichten Einstieg in die Gestaltung geben. Diese Arbeit versucht somit eine möglichst simple Lösung für das komplexe Thema der Schriftgestaltung zu liefern.
This bachelor thesis deals with the conception, implementation and evaluation of a Jump'n'Run game and the consideration of the influence of achievment systems on players. In the game Age of Tunes you play Bardur, the beardless bard and have to try to free the cursed magical creatures in the world Harmonica. The emphasis of the thesis was the clean conception and gradual development of the game, appealing graphic quality, integration of opponents, a mini-game and the consideration of effects of an achievment system on players. In a final evaluation the game and the behavior could be evaluated regarding the achievments.
There are a few systems high and low-cost ones for gaze tracking. Normally low-cost systems go in hand with low-resolution cameras. Here the image quality is poor, so the algorithms for detecting the gaze have to work more precisely. But how to test and analyse them correctly, when there is a bad image quality and no reference point known? The idea of this work is, to generate synthetic eye images, where the reference points are known, because they are mainly manually set and then to test and analyse the algorithms with these synthetic images. By switching on features like gaussian noise or a second glint-like reflection point, it is possible to stepwise approximate the synthetic images close to reality. In fact the experiments will lead to an improvement of the algorithms used in a low-resolution system environment.
Deformable Snow Rendering
(2019)
Accurate snow simulation is key to capture snow's iconic visuals. Intricate
methods exist that attempt to grasp snow behaviour in a holistic manner. Computational complexity prevents them from reaching real-time performance. This thesis presents three techniques making use of the GPU that focus on the deformation of a snow surface in real-time. The approaches are examined by their ability to scale with an increasing number of deformation actors and their visual portrayal of snow deformation. The findings indicate that the approaches maintain real-time performance well into several hundred individual deformation actors. However, these approaches each have their individual restrictions handicapping the visual results. An experimental approach is to combine the techniques at reduced deformation actor count to benefit from the detailed, merged deformation pattern.