Refine
Document Type
- Doctoral Thesis (18) (remove)
Keywords
Institute
- Institut für Computervisualistik (18) (remove)
Das Hauptziel der vorliegenden Arbeit ist die Absicherung der Qualität eines pharmazeutischen Produktionsprozesses durch die Überprüfung des Volumens mikroskopischer Polymerstäbchen mit einem hochgenauen 3D Messverfahren. Die Polymerstäbchen werden für pharmazeutische Anwendungen hergestellt. Aus Gründen der Qualitätssicherung muss das Istgewicht überprüft werden. Derzeit werden die Polymerstäbchen stichprobenartig mit einer hochpräzisen Waage gewogen. Für die nächste Generation von Polymeren wird angenommen, dass die Produktabmessungen weiter reduziert werden sollen und die Produktionstoleranzen auf 2,5% gesenkt werden. Die daraus resultierenden Genauigkeitsanforderungen übersteigen jedoch die Möglichkeiten der Wiegetechnik. Bei homogenen Materialien ist die Masse proportional zum Volumen. Aus diesem Grund kommt dessen Bestimmung als Alternative in Frage. Dies verschafft Zugang zu optischen Messverfahren und deren Flexibilität und Genauigkeitpotenzial. Für den Entwurf eines auf die Fragestellung angepassten Messkonzeptes sind weiterhin von Bedeutung, dass das Objekt kontaktlos, mit einer Taktzeit von maximal fünf Sekunden vermessen und das Volumen approximiert wird. Die Querschnitte der Polymerstäbchen sind etwa kreisförmig. Aufgrund der Herstellung der Fragmente kann nicht davon ausgegangen werden, dass die Anlageflächen orthogonal zur Symmetrieachse des Objektes sind. Daher muss analysiert werden, wie sich kleine Abweichungen von kreisförmigen Querschnitten sowie die nicht idealen Anlageflächen auswirken. Die maximale Standardabweichung für das Volumen, die nicht überschritten werden sollte, beträgt 2,5%. Dies entspricht einer maximalen Abweichung der Querschnittsfläche um 1106 µm² (Fehlerfortpfanzung). Als Bewertungskriterium wird der Korrelationskoeffzient zwischen den gemessenen Volumina und den Massen bestimmt. Ein ideales Ergebnis wäre 100%. Die Messung zielt auf einen Koeffzienten von 98% ab. Um dies zu erreichen, ist ein präzises Messverfahren für Volumen erforderlich. Basierend auf dem aktuellen Stand der Technik können die vorhandenen optischen Messverfahren nicht verwendet werden. Das Polymerstäbchen wird von einer Kamera im Durchlicht beobachtet. Daher sind der Durchmesser und die Länge sichtbar. Das Objekt wird mittels einer mechanischen Vorrichtung um die Längsachse gedreht. So können Bilder von allen Seiten aufgenommen werden. Der Durchmesser und die Länge werden mit der Bildverarbeitung berechnet. Das neue Konzept vereint die Vorteile der Verfahren: Es ist unempfindlich gegen Farb-/Helligkeitsänderungen und die Bilder können in beliebiger Anzahl aufgenommen werden. Außerdem sind die Erfassung und Auswertung wesentlich schneller. Es wird ein Entwurf und die Umsetzung einer Lösung zur hochpräzisen Volumenmessung von Polymerstäbchen mit optischer Messtechnik und Bildverarbeitung ausgearbeitet. Diese spezielle Prozesslösung in der Prozesslinie (inline) sollte eine 100%ige Qualitätskontrolle während der Produktion garantieren. Die Zykluszeiten des Systems sollte fünf Sekunden pro Polymerstäbchen nicht überschreiten. Die Rahmenbedienungen für den Prozess sind durch die Materialeigenschaften des Objekts, die geringe Objektgröße (Breite = 199 µm, Länge = 935 µm bis 1683 µm) und die undeffinierte Querschnittsform (durch den Trocknungsprozess) vorgegeben. Darüber hinaus sollten die Kosten für den Prozess nicht zu hoch sein. Der Messaufbau sollte klein sein und ohne Sicherheitsvorkehrungen oder Abschirmungen arbeiten. Das entstandene System nimmt die Objekte in verschiedenen Winkelschritten auf, wertet mit Hilfe der Bildverarbeitung die Aufnahmen aus und approximiert das Volumen. Der Korrelationskoffizient zwischen Volumen und Gewicht beträgt für 77 Polymerstäbchen mit einem Gewicht von 37 µg bis 80 µg 99; 87%. Mit Hilfe eines Referenzsystems kann die Genauigkeit der Messung bestimmt werden. Die Standardabweichung sollte maximal 2,5% betragen. Das entstandene System erzielt eine maximale Volumenabweichung von 1,7%. Die Volumenvermessung erfüllt alle Anforderungen und kann somit als Alternative für die Waage verwendet werden.
Bio-medical data comes in various shapes and with different representations.
Domain experts use such data for analysis or diagnosis,
during research or clinical applications. As the opportunities to obtain
or to simulate bio-medical data become more complex and productive,
the experts face the problem of data overflow. Providing a
reduced, uncluttered representation of data, that maintains the data’s
features of interest falls into the area of Data Abstraction. Via abstraction,
undesired features are filtered out to give space - concerning the
cognitive and visual load of the viewer - to more interesting features,
which are therefore accentuated. To address this challenge, the dissertation
at hand will investigate methods that deal with Data Abstraction
in the fields of liver vasculature, molecular and cardiac visualization.
Advanced visualization techniques will be applied for this purpose.
This usually requires some pre-processing of the data, which will also
be covered by this work. Data Abstraction itself can be implemented
in various ways. The morphology of a surface may be maintained,
while abstracting its visual cues. Alternatively, the morphology may
be changed to a more comprehensive and tangible representation.
Further, spatial or temporal dimensions of a complex data set may
be projected to a lower space in order to facilitate processing of the
data. This thesis will tackle these challenges and therefore provide an
overview of Data Abstraction in the bio-medical field, and associated
challenges, opportunities and solutions.
The cytological examination of bone marrow serves as clarification of variations in blood smears. It is also used for the clarification of anemia, as exclusion of bone marrow affection at lymphoma and at suspicion of leukemia. The morphological evaluation of hematopoietic cells is the basis for the creation of the diagnosis and for decision support for further diagnostics. Even for experienced hematologists the manual classification of hematopoietic cells is time-consuming, error-prone and subjective. For this reason new methods in the field of image processing and pattern recognition for the automatic classification including preprocessing steps are developed for a computer-assisted microscopy system. These methods are evaluated by means of a huge reference database. The proposed image analysis procedures comprise methods for the automated detection of smears, for the determination of relevant regions, for the localization and segmentation of single hematopoietic cells as well as for the feature extraction and classification task. These methods provide the basis for the first system for the automated, morphological analysis of bone marrow aspirates for leukemia diagnosis and are therefore a major contribution for a better and more efficient patient care in the future.
Technologische Fortschritte auf dem Gebiet der integrierten Halbleitertechnik, die unter anderem auch zur gestiegenen Leistungsfähigkeit der Kamerasensoren beitragen, konzentrierten sich bisher primär auf die Schnelligkeit und das Auflösungsvermögen der Sensoren. Die sich ständig verändernde Entwicklung hat jedoch direkte Folgen auf das physikalische Verhalten einer Kamera und damit auch Konsequenzen für die erreichbare geometrische Genauigkeit einer photogrammetrischen 3D-Rekonstruktion. Letztere stand bisher nicht im Fokus der Forschung und ist eine Aufgabe, der sich diese Arbeit im Sinne der Photogrammetrie und Messtechnik stellt. Aktuelle Untersuchungen und Erfahrungen aus industriellen Projekten zeigen in diesem Zusammenhang, dass das geometrisch-physikalische Verhalten digitaler Kameras - für höchste photogrammetrische Ansprüche - noch nicht ausreichend modelliert ist. Direkte Aussagen zur erreichbaren Genauigkeit bei gegebener Hardware erweisen sich daher bislang als unzureichend. Ferner kommt es aufgrund der unpräzisen Modellierung zu Einbußen in der Zuverlässigkeit der erreichten Ergebnisse. Für den Entwickler präziser kamerabasierter Messverfahren folgt daraus, dass zu einer optimalen Schätzung der geometrischen Genauigkeit und damit auch vollständigen Ausschöpfung der Messkamera geeignete mathematische Modelle erforderlich sind, die das geometrisch physikalische Verhalten bestmöglich beschreiben. Diese Arbeit beschreibt, wie die erreichbare Genauigkeit einer Bündelblockausgleichung, schon a priori mithilfe des EMVA1288 Standards approximiert werden kann. Eine in diesem Zusammenhang wichtige Teilaufgabe ist die Schaffung einer optimalen Messanordnung. Hierzu gehören Untersuchungen der üblicherweise verwendeten Kalibrierkörper und die Beseitigung von systematischen Fehlern vor und nach der Bündelblockausgleichung. Zum Nachweis dieser Systematiken wird eine auf statistischem Lernen basierende Methode beschrieben und untersucht. Erst wenn alle genauigkeitsmindernden Einflüsse berücksichtigt sind, wird der Anteil des Sensors in den Messdaten sichtbar und damit auch mathematisch parametrisierbar. Die Beschreibung des Sensoreinflusses auf die erreichbare Genauigkeit der Bündelblockausgleichung erfolgt in drei Schritten. Der erste Schritt beschreibt den Zusammenhang zwischen ausgewählten EMVA1288-Kennzahlen und der Unsicherheit eines Grauwertes. Der zweite Schritt ist eine Modellierung dieser Grauwertunsicherheit als Zentrumsunsicherheit einer Zielmarke. Zur Beschreibung dieser Unsicherheit innerhalb der Bündelblockausgleichung wird ein stochastisches Modell, basierend auf dem EMVA1288-Standard, vorgeschlagen. Ausgehend vom Rauschen des Zielmarkenmittelpunktes wird im dritten Schritt die Unsicherheit im Objektraum beispielhaft mit Hilfe von physikalisch orientierten Simulationen approximiert. Die Wirkung der vorgeschlagenen Methoden wird anhand von Realkalibrierungen nachgewiesen. Abschließend erfolgt die Diskussion der vorgeschlagenen Methoden und erreichten Ergebnisse sowie ein Ausblick auf kommende Untersuchungen.
The goal of this thesis is the development of methods for augmented image synthesis using 3D photo collections. 3D photo collections are representations of real scenes automatically generated from single photos and describe a scene as a set of images with known camera poses as well as a sparse point-based model of the scene geometry. The main goal is to perform a photo-realistic augmented image synthesis of real and virtual parts, where the real scene is provided as a 3D photo collection. Therefore, three main problems are addressed.
Since the photos may be represented in different device-specific RGB color spaces, a color characterization of the 3D photo collections is necessary to gain correct color information that is consistent with human perception. The proposed novel method automatically transforms all images into a common RGB color space and thereby simplifies color characterization of 3D photo collections.
As a main problem for augmented image synthesis, all environmental lighting has to be known in order to apply illumination to virtual parts that is consistent with the real portions shown in the photos. To solve this problem, two novel methods were developed to reconstruct the lighting from 3D photo collections.
In order to perform image synthesis for arbitrary views on the scene, an image-based approach was developed that generates new views in 3D photo collections making direct use of its point cloud. The novel method creates new views in real-time and allows free-navigation.
In conclusion, the proposed novel methods show that 3D photo collections are a useful representation for real scenes in Augmented Reality and they can be used to perform a realistic image synthesis of real and virtual portions.
Studies in recent years have demonstrate adolescents and young adults to have a deficient data protection competence, however children and adolescents between the ages of ten and 13 were mostly not focus of these studies. Therefore, the guiding question of the work is how data protection competence is developed in children and adolescents at a young age in order to be able to infer suitable, educational concepts for this age group. At the beginning of the work, a data protection competence model is derived from a media competence model, which serves as the basis for the further field investigation. A survey was carried out at general secondary schools in Rhineland-Palatinate, which shows that the respondents still have sufficiently developed Risk Assessment Competence, but were insufficiently developed in terms of knowledge, Selection and Usage Competence and the Implementation Competence. Recommendations for actions are given in the last part of the work – containing learning goal descriptions to be possibly implemented in an educational framework – in order to address this issue.
Leichte Sprache (LS, easy-to-read German) is a simplified variety of German. It is used to provide barrier-free texts for a broad spectrum of people, including lowliterate individuals with learning difficulties, intellectual or developmental disabilities (IDD) and/or complex communication needs (CCN). In general, LS authors are proficient in standard German and do not belong to the aforementioned group of people. Our goal is to empower the latter to participate in written discourse themselves. This requires a special writing system whose linguistic support and ergonomic software design meet the target group’s specific needs. We present EasyTalk a system profoundly based on natural language processing (NLP) for assistive writing in an extended variant of LS (ELS). EasyTalk provides users with a personal vocabulary underpinned with customizable communication symbols and supports in writing at their individual level of proficiency through interactive user guidance. The system minimizes the grammatical knowledge needed to produce correct and coherent complex contents by intuitively formulating linguistic decisions. It provides easy dialogs for selecting options from a natural-language paraphrase generator, which provides context-sensitive suggestions for sentence components and correctly inflected word forms. In addition, EasyTalk reminds users to add text elements that enhance text comprehensibility in terms of audience design (e.g., time and place of an event) and improve text coherence (e.g., explicit connectors to express discourse-relations). To tailor the system to the needs of the target group, the development of EasyTalk followed the principles of human-centered design (HCD). Accordingly, we matured the system in iterative development cycles, combined with purposeful evaluations of specific aspects conducted with expert groups from the fields of CCN, LS, and IT, as well as L2 learners of the German language. In a final case study, members of the target audience tested the system in free writing sessions. The study confirmed that adults with IDD and/or CCN who have low reading, writing, and computer skills can write their own personal texts in ELS using EasyTalk. The positive feedback from all tests inspires future long-term studies with EasyTalk and further development of this prototypical system, such as the implementation of a so-called Schreibwerkstatt (writing workshop)
This thesis presents the analysis of gamebased touristic applications. In tourism, actions can only be motivated intrinsic. Thus, this thesis at first researches specific intrinsic motivation concepts. It shows how gamebased motivation can be produced on purpose and answers the question whether gamebased motivation can be transferred to non-gamebased applications.
Using these results, different touristic applications have been developed and evaluated.
All applications aimed to add value to the touristic experience. The applications are sorted by their mobility. There are completely mobile, completely stationary and hybrid systems in this work. There are different ways to add value which are presented in this work: Gamebased exploration, knowledge transfer and social interaction between tourists.
Finally, an authoring tool for gamebased touristic tours on smartphones is presented.
This thesis focuses on the utilization of modern graphics hardware (GPU) for visualization and computation purposes, especially of volumetric data from medical imaging. The considerable increase in raw computing power in recent years has turned commodity systems into high-performance workstations. In combination with the direct rendering capabilities of graphics hardware, "visual computing" and "computational steering" approaches on large data sets have become feasible. In this regard several example applications and concepts such as the "ray textures" have been developed and are discussed in detail. As the amount of data to be processed and visualized is steadily increasing, memory and bandwidth limitations require compact representations of the data. While the compression of image data has been investigated extensively in the past, the thesis addresses possibilities of performing computations directly on the compressed data. Therefore, different categories of algorithms are identified and represented in the wavelet domain. By using special variants of the compressed format, efficient implementations of essential image processing algorithms are possible and demonstrate the potential of the approach. From the technical perspective, the GPU-based framework "Cascada" has been developed in the course of this thesis. The introduction of object-oriented concepts to shader programming, as well as a hierarchical representation of computation and/or visualization procedures led to a simplified utilization of graphics hardware while maintaining competitive performance. This is shown with different implementations throughout the contributions, as well as two clinical projects in the field of diagnosis assistance. On the one hand the semi-automatic segmentation of low-resolution MRI data sets of the human liver is evaluated. On the other hand different possibilities in assessing abdominal aortic aneurysms are discussed; both projects make use of graphics hardware. In addition, "Cascada" provides extensions towards recent general-purpose programming architectures and a modular design for future developments.
Human action recognition from a video has received growing attention in computer vision and has made significant progress in recent years. Action recognition is described as a requirement to decide which human actions appear in videos. The difficulties involved in distinguishing human actions are due to the high complexity of human behaviors as well as appearance variation, motion pattern variation, occlusions, etc. Many applications use human action recognition on captured video from cameras, resulting in video surveillance systems, health monitoring, human-computer interaction, and robotics. Action recognition based on RGB-D data has increasingly drawn more attention to it in recent years. RGB-D data contain color (Red, Green, and Blue (RGB)) and depth data that represent the distance from the sensor to every pixel in the object (object point). The main problem that this thesis deals with is how to automate the classification of specific human activities/actions through RGB-D data. The classification process of these activities utilizes a spatial and temporal structure of actions. Therefore, the goal of this work is to develop algorithms that can distinguish these activities by recognizing low-level and high-level activities of interest from one another. These algorithms are developed by introducing new features and methods using RGB-D data to enhance the detection and recognition of human activities. In this thesis, the most popular state-of-the-art techniques are reviewed, presented, and evaluated. From the literature review, these techniques are categorized into hand-crafted features and deep learning-based approaches. The proposed new action recognition framework is based on these two categories that are approved in this work by embedding novel methods for human action recognition. These methods are based on features extracted from RGB-D data that are
evaluated using machine learning techniques. The presented work of this thesis improves human action recognition in two distinct parts. The first part focuses on improving current successful hand-crafted approaches. It contributes into two significant areas of state-of-the-art: Execute the existing feature detectors, and classify the human action in the 3D spatio-temporal domains by testing a new combination of different feature representations. The contributions of this part are tested based on machine learning techniques that include unsupervised and supervised learning to evaluate this suitability for the task of human action recognition. A k-means clustering represents the unsupervised learning technique, while the supervised learning technique is represented by: Support Vector Machine, Random Forest, K-Nearest Neighbor, Naive Bayes, and Artificial Neural Networks classifiers. The second part focuses on studying the current deep-learning-based approach and how to use it with RGB-D data for the human action recognition task. As the first step of each contribution, an input video is analyzed as a sequence of frames. Then, pre-processing steps are applied to the video frames, like filtering and smoothing methods to remove the noisy data from each frame. Afterward, different motion detection and feature representation methods are used to extract features presented in each frame. The extracted features
are represented by local features, global features, and feature combination besides deep learning methods, e.g., Convolutional Neural Networks. The feature combination achieves an excellent accuracy performance that outperforms other methods on the same RGB-D datasets. All the results from the proposed methods in this thesis are evaluated based on publicly available datasets, which illustrate that using spatiotemporal features can improve the recognition accuracy. The competitive experimental results are achieved overall. In particular, the proposed methods can be better applied to the test set compared to the state-of-the-art methods using the RGB-D datasets.