Refine
Year of publication
- 2020 (4) (remove)
Document Type
- Doctoral Thesis (4) (remove)
Keywords
Institute
- Institut für Computervisualistik (4) (remove)
Das Hauptziel der vorliegenden Arbeit ist die Absicherung der Qualität eines pharmazeutischen Produktionsprozesses durch die Überprüfung des Volumens mikroskopischer Polymerstäbchen mit einem hochgenauen 3D Messverfahren. Die Polymerstäbchen werden für pharmazeutische Anwendungen hergestellt. Aus Gründen der Qualitätssicherung muss das Istgewicht überprüft werden. Derzeit werden die Polymerstäbchen stichprobenartig mit einer hochpräzisen Waage gewogen. Für die nächste Generation von Polymeren wird angenommen, dass die Produktabmessungen weiter reduziert werden sollen und die Produktionstoleranzen auf 2,5% gesenkt werden. Die daraus resultierenden Genauigkeitsanforderungen übersteigen jedoch die Möglichkeiten der Wiegetechnik. Bei homogenen Materialien ist die Masse proportional zum Volumen. Aus diesem Grund kommt dessen Bestimmung als Alternative in Frage. Dies verschafft Zugang zu optischen Messverfahren und deren Flexibilität und Genauigkeitpotenzial. Für den Entwurf eines auf die Fragestellung angepassten Messkonzeptes sind weiterhin von Bedeutung, dass das Objekt kontaktlos, mit einer Taktzeit von maximal fünf Sekunden vermessen und das Volumen approximiert wird. Die Querschnitte der Polymerstäbchen sind etwa kreisförmig. Aufgrund der Herstellung der Fragmente kann nicht davon ausgegangen werden, dass die Anlageflächen orthogonal zur Symmetrieachse des Objektes sind. Daher muss analysiert werden, wie sich kleine Abweichungen von kreisförmigen Querschnitten sowie die nicht idealen Anlageflächen auswirken. Die maximale Standardabweichung für das Volumen, die nicht überschritten werden sollte, beträgt 2,5%. Dies entspricht einer maximalen Abweichung der Querschnittsfläche um 1106 µm² (Fehlerfortpfanzung). Als Bewertungskriterium wird der Korrelationskoeffzient zwischen den gemessenen Volumina und den Massen bestimmt. Ein ideales Ergebnis wäre 100%. Die Messung zielt auf einen Koeffzienten von 98% ab. Um dies zu erreichen, ist ein präzises Messverfahren für Volumen erforderlich. Basierend auf dem aktuellen Stand der Technik können die vorhandenen optischen Messverfahren nicht verwendet werden. Das Polymerstäbchen wird von einer Kamera im Durchlicht beobachtet. Daher sind der Durchmesser und die Länge sichtbar. Das Objekt wird mittels einer mechanischen Vorrichtung um die Längsachse gedreht. So können Bilder von allen Seiten aufgenommen werden. Der Durchmesser und die Länge werden mit der Bildverarbeitung berechnet. Das neue Konzept vereint die Vorteile der Verfahren: Es ist unempfindlich gegen Farb-/Helligkeitsänderungen und die Bilder können in beliebiger Anzahl aufgenommen werden. Außerdem sind die Erfassung und Auswertung wesentlich schneller. Es wird ein Entwurf und die Umsetzung einer Lösung zur hochpräzisen Volumenmessung von Polymerstäbchen mit optischer Messtechnik und Bildverarbeitung ausgearbeitet. Diese spezielle Prozesslösung in der Prozesslinie (inline) sollte eine 100%ige Qualitätskontrolle während der Produktion garantieren. Die Zykluszeiten des Systems sollte fünf Sekunden pro Polymerstäbchen nicht überschreiten. Die Rahmenbedienungen für den Prozess sind durch die Materialeigenschaften des Objekts, die geringe Objektgröße (Breite = 199 µm, Länge = 935 µm bis 1683 µm) und die undeffinierte Querschnittsform (durch den Trocknungsprozess) vorgegeben. Darüber hinaus sollten die Kosten für den Prozess nicht zu hoch sein. Der Messaufbau sollte klein sein und ohne Sicherheitsvorkehrungen oder Abschirmungen arbeiten. Das entstandene System nimmt die Objekte in verschiedenen Winkelschritten auf, wertet mit Hilfe der Bildverarbeitung die Aufnahmen aus und approximiert das Volumen. Der Korrelationskoffizient zwischen Volumen und Gewicht beträgt für 77 Polymerstäbchen mit einem Gewicht von 37 µg bis 80 µg 99; 87%. Mit Hilfe eines Referenzsystems kann die Genauigkeit der Messung bestimmt werden. Die Standardabweichung sollte maximal 2,5% betragen. Das entstandene System erzielt eine maximale Volumenabweichung von 1,7%. Die Volumenvermessung erfüllt alle Anforderungen und kann somit als Alternative für die Waage verwendet werden.
Studies in recent years have demonstrate adolescents and young adults to have a deficient data protection competence, however children and adolescents between the ages of ten and 13 were mostly not focus of these studies. Therefore, the guiding question of the work is how data protection competence is developed in children and adolescents at a young age in order to be able to infer suitable, educational concepts for this age group. At the beginning of the work, a data protection competence model is derived from a media competence model, which serves as the basis for the further field investigation. A survey was carried out at general secondary schools in Rhineland-Palatinate, which shows that the respondents still have sufficiently developed Risk Assessment Competence, but were insufficiently developed in terms of knowledge, Selection and Usage Competence and the Implementation Competence. Recommendations for actions are given in the last part of the work – containing learning goal descriptions to be possibly implemented in an educational framework – in order to address this issue.
In the context of augmented reality we define tracking as a collection of methods to obtain the position and orientation (pose) of a user. By means of various displaying techniques, this ensures a correct visual overlay of graphical information onto the reality perceived. Precise results for calculation of the camera pose are gained by methods of image processing, usually analyzing the pixels of an image and extracing features, which can be recognized over the image sequence. However, these methods do not regard the process of image synthesis or at least in a very simplyfied way. In contrast, the class of model-based methods assumes a given 3D model of the observed scene. Based on the model data features can be identified to establish correspondences in the camera image. From these feature correspondences the camera pose is calculated. An interesting approach is the strategy of analysis-by-synthesis, regarding the computer graphics rendering process for extending the knowledge about the model by information from image synthesis and other environment variables.
In this thesis the components of a tracking system are identified and further it is analyzed, to what extend information about the model, the rendering process and the environment can contribute to the components for improvement of the tracking process using analysis-by-synthesis. In particular, by using knowledge as topological information, lighting or perspective, the feature synthesis and correspondence finding should lead to visually unambiguous features that can be predicted and evaluated to be suitable for stable tracking of the camera pose.
Bio-medical data comes in various shapes and with different representations.
Domain experts use such data for analysis or diagnosis,
during research or clinical applications. As the opportunities to obtain
or to simulate bio-medical data become more complex and productive,
the experts face the problem of data overflow. Providing a
reduced, uncluttered representation of data, that maintains the data’s
features of interest falls into the area of Data Abstraction. Via abstraction,
undesired features are filtered out to give space - concerning the
cognitive and visual load of the viewer - to more interesting features,
which are therefore accentuated. To address this challenge, the dissertation
at hand will investigate methods that deal with Data Abstraction
in the fields of liver vasculature, molecular and cardiac visualization.
Advanced visualization techniques will be applied for this purpose.
This usually requires some pre-processing of the data, which will also
be covered by this work. Data Abstraction itself can be implemented
in various ways. The morphology of a surface may be maintained,
while abstracting its visual cues. Alternatively, the morphology may
be changed to a more comprehensive and tangible representation.
Further, spatial or temporal dimensions of a complex data set may
be projected to a lower space in order to facilitate processing of the
data. This thesis will tackle these challenges and therefore provide an
overview of Data Abstraction in the bio-medical field, and associated
challenges, opportunities and solutions.