Refine
Year of publication
- 2021 (8) (remove)
Keywords
- Arzneimittel (1)
- Depth Profile (1)
- Ecotoxicity (1)
- Environmental samples (1)
- Fischgewebe (1)
- Fractionation (1)
- Metalloids (1)
- Metals (1)
- Pharmaceuticals (1)
- Pore Water (1)
Institute
- Institut für Integrierte Naturwissenschaften, Abt. Chemie (8) (remove)
The sediments of surface waters are temporary or final depository of many chemical compounds, including trace metals and metalloids (metal(loid)s) from natural and anthropogenic sources. Whether they act as a source or sink of metal(loid)s depends strongly on the dynamics of the biogeochemical processes that take place at the sediment-water interface (SWI). Important information on biogeochemical processes as well as on the exposure, the fate and the transport of pollutants at the SWI can be obtained by determining chemical concentration profiles in the sediment pore water. A major challenge is to conduct experiments with a spatial resolution, which allows to adequately record existing gradients and to log all the parameters needed, to describe and better understand the complex processes at the SWIs. At the same time, it is from major importance to prevent the formation of any artifacts during sampling, which may occur due to the labile nature of the SWIs and the very steep biogeochemical gradients.
In this context, in the first part of this work, a system was developed and tested that enables the automated, minimal invasive sampling of sediment pore water of undisturbed or manipulated sediments while simultaneously recording parameters such as redox potential, oxygen content and pH value. In an incubation experiment the impact of acidification and mechanical disturbance (re-suspension) on the mobility of 13 metal(loid)s was investigated using a triple quadrupole inductively coupled plasma-mass spectrometry (ICP-QQQ-MS) multi-element approach. Most metals were released as consequence of sulfide weathering whereas mechanical disturbance had a major impact on the mobility of the oxide forming elements As, Mo, Sb, U and V. Additionally, options were demonstrated to address with the system the size fractionation of metal(loid)s in pore water samples and the speciation of As(III/V) and Sb(III/V).
In the second part, the focus, with a similar experimental design, was placed on the processes leading to the release of metal(loid)s. For this purpose, two incubation experiments with different oxygen supply were conducted in parallel. For the first time the nonmetals carbon, phosphorus and sulfur were analyzed simultaneous to 13 metal(loid)s in sediment pore water by ICP-QQQ-MS. Throughout the experiment metal(loid) size fractionation was monitored. It was confirmed that resuspension promotes the mobility of metalloids such as As, Sb and V, while the release of most metals was largely attributed to pyrite weathering. The colloidal (0.45-16 μm) contribution in terms of mobilization was only relevant for a few elements.
Finally, the sampling system was used as part of a new approach to sediment risk assessment. Undisturbed sediment cores from differently contaminated positions in the Trave estuary were examined, considering 16 metal(loid)s, the non-metals C, P and S and the ions NH4+, PO43- and SO42-. By the first in-depth comparison with in-situ dialysis-based pore water sampling the ability of the suction-based approach to represent field conditions was proven. The pore water studies together with supplementing resuspension experiments in bio-geochemical microcosms and sequential extraction identified the most “pristine” sediment of the study area as posing the greatest risk of metal(loid) release. However, the potentially released amounts per kg of sediment are only a few parts per thousand of the average daily loads of the Trave river.
SUMMARY
Buildings and infrastructures characterize the appearance of our cultural landscapes and provide essential services for the human society. However, they inevitably impact the natural environment e.g. by the structural change of habitats. Additionally, they potentially cause further negative environmental impacts due to the release of chemical substances from construction materials. Galvanic anodes and organic coatings regularly used for corrosion protection of steel structures are building materials of particular importance for the transport infrastructure. In direct contact with a water body or indirectly via the runoff after rainfall, numerous chemicals can be released into the environment and pose a risk to aquatic organisms. Up to now, there is no uniform investigation and evaluation approach for the assessment of the environmental compatibility of building products. Furthermore, galvanic anodes and organic coatings pose particular challenges for their ecotoxicological characterization due to their composition. Therefore, the objective of the presented thesis was the ecotoxicological assessment of emissions from galvanic anodes and protective coatings as well as the development of standardized assessment procedures for these materials.
The possible environmental hazard posed by the use of anodes on offshore installations was investigated on three trophic levels. To ensure a realistic and reliable evaluation, the experiments were carried out in natural seawater and under natural pH conditions. Moreover, the anode material and its main components zinc and aluminum were exposed while simulating a worst-case scenario. The anode material examined caused a weak inhibition of algae growth; no acute toxicity was observed on the luminescent bacteria and amphipods. However, an increase of aluminum and indium levels in the crustacean species was found. On the basis of these results, no direct threat has been identified for marine organisms from the use of galvanic aluminum anodes. However, an accumulation of metals in crustaceans and a resulting entry into the marine food web cannot be excluded.
The environmental compatibility of organic coating systems was exemplarily evaluated using a selection of relevant products based on epoxy resins (EP) and polyurethanes. For this purpose, coated test plates were dynamically leached over 64 days. The eluates obtained were systematically analyzed for their ecotoxicological effects (acute toxicity to algae and luminescent bacteria, mutagenic and estrogenic effects) and their chemical composition. In particular, the EP-based coatings caused significant bacterial toxicity and estrogen-like effects. The continuously released 4-tert-butylphenol was identified as a main contributor to these effects and was quantified in concentrations exceeding the predicted no effect concentration for freshwater in all samples. Interestingly, the overall toxicity was not governed by the content of 4-tert-butylphenol in the products but rather by the release mechanism of this compound from the investigated polymers. This finding indicates that an optimization of the composition can result in the reduction of emissions and thus of environmental impacts - possibly due to a better polymerization of the compounds.
Coatings for corrosion protection are exposed to rain, changes in temperature and sun light leading to a weathering of the polymer. To determine the influence of light-induced aging on the ecotoxicity of top coatings, the emissions and associated adverse effects of UV-irradiated and untreated EP-based products were compared. To that end, the investigation of static leachates was focused on estrogenicity and bacterial toxicity, which were detected in the classic microtiter plate format and in combination with thin-layer plates. Both materials examined showed a significant decrease of the ecotoxicological effects after irradiation with a simultaneous reduction of the 4-tert-butylphenol emission. However, bisphenol A and various structural analogues were detected as photolytic degradation products of the polymers, which also contributed to the observed effects. In this context, the identification of bioactive compounds was supported by the successful combination of in-vitro bioassays with chemical analysis by means of an effect-directed analysis. The presented findings provide important information to assess the general suitability of top coatings based on epoxy resins.
Within the scope of the present study, an investigation concept was developed and successfully applied to a selection of relevant construction materials. The adaptation of single standard methods allowed an individual evaluation of these products. At the same time, the suitability of the ecotoxicological methods used for the investigation of materials of unknown and complex composition was confirmed and the basis for a systematic assessment of the environmental compatibility of corrosion protection products was created. Against the background of the European Construction Products Regulation, the chosen approach can facilitate the selection of environmentally friendly products and contributes to the optimization of individual formulations by the simple comparison of different building materials e.g. within a product group.
Identifizierung und Quantifizierung von Mikroplastik mittels quantitativer ¹H-NMR Spektroskopie
(2021)
Plastic, and so microplastics (MP), are globally present and represent an increasingly significant problem for the environment. In order to understand the distribution and impact of MP it is important to identify and quantify MP over a wide range of sizes and to ensure comparability of studies. However, comparability of studies is made difficult or even impossible by different MP concentration data. There still is a great need for research in the field of size-independent, quantitative analysis of MP in environmental samples, especially with regard to mass-based MP concentration information. Therefore, this thesis aims to utilize quantitative ¹H-NMR spectroscopy (qNMR) as an alternative method in MP analysis. The qNMR method is a size-independent, mass-based method which can be used as an alternative for MP analysis and has potential for routine analysis. The proof-of-concept was demonstrated for LDPE, PET and PS particles (Chapter 2). Additionally, PVC, PA, and ABS particles were tested to cover the most important polymer types for MP-analysis (Chapter 3). Moreover, using PET, PVC and PS as examples it was examined whether the qNMR method can also be transferred to the more cost-effective NoD method (Chapter 4). Results of method validation of both methods (1D and NoD) show that quantification using the qNMR method is not only possible in principle, but also shows high accuracy (88.0-110 %) and detection limits (1 – 84 µg) that lie within the environmentally relevant range. Furthermore, it was examined whether not only high-field instruments are suitable for MP analysis, but also benchtop devices (low-field instruments), which are much more cost-effective in purchase and maintenance. Increasing measurement times for PET and PS to 30 min and for PVC to 140 min, the lower measuring frequency especially concerning resolving capacity could be compensated (Chapter 4). To address the question of potential matrix effects of environmental samples, matrix effects and recovery rates of sample preparation procedures, which have been developed specifically for the application of the qNMR method were investigated using PET fibers as an example (Chapter 5). It could be shown that environmental matrices do not interfere with the quantitative analysis of MP using qNMR methods. Specific sample preparation methods developed for qNMR analysis can be used with recovery rates > 80 % for different environmental matrices (Chapter 5). Finally, first orienting investigations for the simultaneous determination of several polymer types in one sample are reported (Chapter 6).
Method development for the quantification of pharmaceuticals in aqueous environmental matrices
(2021)
As a consequence of the world population increase and the resulting water scarcity, water quality is the object of growing attention. In that context, organic anthropogenic molecules — often defined as micropollutants— represent a threat for water resources. Among them, pharmaceuticals are the object of particular concerns due to their permanent discharge, their increasing consumption and their effect-based structures. Pharmaceuticals are mainly introduced in the environment via wastewater treatment plants (WWTPs), along with their metabolites and the on-site formed transformation products (TPs). Once in the aquatic environment, they partition between the different environmental compartments in particular the aqueous phase, suspended particulate matter(SPM) and biota. In the last decades, pharmaceuticals have been widely investigated in the water phase. However, extreme polar pharmaceuticals have rarely been monitored due to the lack of robust analytical methods. Moreover, metabolites and TPs have seldom been included in routine analysis methods although their environmental relevance is proven. Furthermore, pharmaceuticals have been only sporadically investigated in SPM and biota and adequate multi-residue methods are lacking to obtain comprehensive results about their occurrence in these matrices. This thesis endeavors to cover these gaps of knowledge by the development of generic multi-residue methods for pharmaceuticals determination in the water phase, SPM and biota and to evaluate the occurrence and partition of pharmaceuticals into these compartments. For a complete overview, a particular focus was laid on extreme polar pharmaceuticals, pharmaceutical metabolites and TPs. In total, three innovative multi-residue methods were developed, they include analytes covering a broad range of physico-chemical properties. First, a reliable multi-residue method was developed for the analysis of extreme polar pharmaceuticals, metabolites and TPs dissolved in water. The selected analytes covered a significant range of elevated polarity and the method would be easily expendable to further analytes. This versatility could be achieved by the utilization of freeze-drying as sample preparation and zwitterionic hydrophilic interaction liquid chromatography (HILIC) in gradient elution mode. The suitability of HILIC chromatography to simultaneously quantify a large range of micropollutants in aqueous environmental samples was thoroughly studied. Several limitations were pointed out: a very complex and time-consuming method development, a very high sensitivity with regards to modification of the acetonitrile to water ratio in the eluent or the diluent and high positive matrix effects for certain analytes. However, these limitations can be overcome by the utilization of a precise protocol and appropriate labeled internal standards. They are overmatched by the benefits of HILIC which permits the chromatographic separation of extreme polar micropollutants. Investigation of environmental samples showed elevated concentrations of the analytes in the water phase. In particular, gabapentin, metformin, guanylurea and oxypurinol were measured at concentrations in the µg/L range in surface water. Subsequently, a reliable multi-residue method was established for the determination of 57 pharmaceuticals, 47 metabolites and TPs sorbed to SPM down to the low ng/g range. This method was conceived to cover a large range of polarity in particular with the inclusion of extreme polar pharmaceuticals. The extraction procedure was based on pressurized liquid extraction (PLE) followed by a clean-up via solvent exchange and detection via direct injection-reversed-phase LC-MS/MS and freeze-drying HILIC-MS/MS. Pharmaceutical sorption was examined using laboratory experiments. Derived distribution coefficients Kd varied by five orders of magnitude among the analytes and confirmed a high sorption potential for positively charged and nonpolar pharmaceuticals. The occurrence of pharmaceuticals in German rivers SPM was evaluated by the investigation of annual composite SPM samples taken at four sites at the river Rhine and one site at the river Saar between the years 2005 and 2015. It revealed the ubiquitous presence of pharmaceuticals sorbed to SPM in these rivers. In particular, positively charged analytes, even very polar and nonpolar pharmaceuticals showed appreciable concentrations. For many pharmaceuticals, a distinct correlation was observed between the annual quantities consumed in Germany and the concentrations measured in SPM. Studies of composite SPM spatial distribution permitted to get hints about specific industrial discharge by comparing the pollution pattern along the river. For the first time, these results showed the potential of SPM for the monitoring of positively charged and nonpolar pharmaceuticals in surface water. Finally, a reliable and generic multi residue method was developed to investigate 35 pharmaceuticals and 28 metabolites and TPs in fish plasma, fish liver and fish fillet. For this matrix, it was very challenging to develop an adequate clean-up allowing for the sufficient separation of the matrix disturbances from the analytes. In the final method, fish tissue extraction was performed by cell disruption followed by a non-discriminating clean-up based on silica gel solid-phase extraction(SPE) and restrictive access media (RAM) chromatography. Application of the developed method to the measurement of bream and carp tissues from German rivers revealed that even polar micropollutants such as pharmaceuticals are ubiquitously present in fish tissues. In total, 17 analytes were detected for the first time in fish tissues, including 10 metabolites/TPs. The importance of monitoring metabolites and TPs in fish tissues was confirmed with their detection at similar concentrations as their parents. Liver and fillet were shown to be appropriate for the monitoring of pharmaceuticals in fish, whereas plasma is more inconvenient due to very low concentrations and collection difficulties. Elevated concentrations of certain metabolites suggest possible formation of human metabolites in fish. Measured concentrations indicate a low bioaccumulation potential for pharmaceuticals in fish tissues.
Modellbildung zum Abbindeverhalten von PCE-verflüssigten und CA-Zement-gebundenen Feuerbetonen
(2021)
Feuerbetone werden als Auskleidung in industriellen Hochtemperaturaggregaten, wie beispielsweise in der Eisen- und Stahlindustrie, eingesetzt. Nach dem Mischen und dem Gießen eines Feuerbetons in Formen bzw. Schalungen, muss dieser abbinden und eine ausreichende Festigkeit ausbilden. Die Kinetik der Abbindevorgänge und somit auch das Erhärtungsverhalten variiert dabei stark in Abhängigkeit der Zusammensetzung, vor allem hinsichtlich des Bindemittels und der Additive, des Feuerbetons. In der Praxis der Herstellung von Feuerbetonen kommt es häufig zu Beschädigungen der hergestellten Bauteile oder Auskleidungen durch das Fließen noch nicht ausreichend abgebundener Feuerbetone bzw. die Beschädigung von Ecken und Kanten während des Ausschalens oder Bauteilen reißen durch mechanische Belastung beim Umsetzen oder beim Transport. Diese Beschädigungen basieren auf Fehleinschätzungen zum Abbindefortschritt und der korrespondierenden Festigkeitsausprägung der Feuerbetone. Diese wiederum sind auf Lücken im Stand der Technik zurück zu führen.
Für PCE-verflüssigte und CA-Zement-gebundene Korund-Feuerbetonen mit einer Al₂O₃- und Al₂O₃-SiO₂-Matrix, werden die Defizite des Stands der Technik für diese Feuerbetonklasse identifiziert: Diese liegen im Bereich der Verflüssigungswirkung und des ersten Ansteifens der Feuerbetone, der Hydratation des CA-Zements in den Feuerbetonen und der Festigkeitsausprägung der Feuerbetone. Hieraus leitet sich ein entsprechender Forschungsbedarf ab.
Am Beispiel von zwei PCE-verflüssigten (PCE mit kurzer Hauptkette und langen Seitenketten sowie PCE mit langer Hauptkette und kurzen Seitenketten) und CA-Zement-gebundenen (70 % Al₂O₃) Feuerbetonen mit einer reaktivtonerde-basierten und einer reaktivtonerde-mikrosilika-basierten Matrix werden abbindekinetische Untersuchungen durchgeführt. Anhand verschiedener abbindekinetischer Messmethoden, wie Schallgeschwindigkeit oder elektrischer Leitfähigkeit, und einigen ergänzenden Messung, wie beispielsweise das ζ-Potential, wird der Abbindeverlauf der Feuerbetone untersucht und die Defizite aus dem Stand der Technik aufgeklärt.
Im Detail wurde der Stand der Technik um folgende Erkenntnisse ergänzt:
• Verflüssigung von Feuerbetonen mit PCE-Molekülen: Es wurde festgestellt, dass die Verflüssigungswirkung und das erste Ansteifen maßgeblich durch die Struktur der Verflüssigermoleküle hervorgerufen werden.
PCE-Moleküle mit langen Seitenketten verflüssigen eher sterisch. Durch die Vermittlung von Ca²⁺ aus dem CA-Zement wird die Adsorption der PCE-Moleküle verstärkt. Freie PCE-Moleküle können auf CAH-Phasen (Hydratationsprodukte) adsorbieren und somit die Fließfähigkeit des Feuerbetons für eine gewisse Zeit aufrechterhalten.
PCE-Moleküle mit kurzen Seitenketten verflüssigen elektrosterisch. Bei Lösung von Ca²⁺ aus dem CA-Zement kommt es zu einer Ca-PCE Gel-Bildung und einer korrespondierenden Koagulation der Feuerbetonmatrix und der Feuerbeton steift zeitnah nach dem Mischen an.
• Hydratation von CA-Zement: Die Hydratation von CA-Zement in den Feuerbetonen wird wesentlich durch die Länge der Seitenketten der PCE-Moleküle bzw. der Anwesenheit von Zitronensäure beeinflusst.
In Feuerbetonen die mit PCE-Molekülen mit langen Seitenketten verflüssigt wurden, kann der CA-Zement weitestgehend frei hydratisieren. Der CAH-Phasenanteil steigt in zwei Abschnitten, getrennt von einer dormanten Phase. Die dormante Phase der CA Zementhydratation wurde auf eine Lösungshemmung der Al-O-H-Passivierungsschicht auf dem CA-Zement bei mäßigem pH-Wert (pH = 12,3) zurückgeführt.
In Feuerbetonen die mit PCE-Molekülen mit kurze Seitenketten und Zitronensäure verflüssigt werden, wird die Hydratationsreaktion durch eine Ca-Citrat-PCE-Al(OH)₄-Gelbildung stark gehemmt. Es besteht die Vermutung, dass die Bindung von Ca²⁺ in dem Gel zum einen eine sehr ausgeprägte dormante Phase (pH < 12,3), mit einer schlechten Löslichkeit der Passivierungsschicht, bewirkt und zum anderen auch die Fällung von CAH-Phasen unterdrückt.
• Festigkeitsausprägung von CA-Zement-gebundenen Feuerbetonen:
Eine Koagulation bewirkt die erste Festigkeitssteigerung der Feuerbetone auf σB < 1 MPa. Im Anschluss findet die Hauptfestigkeitssteigerung auf Grund von Austrocknung durch Hydratation und Verdunstung statt. Der weitere Teil der Festigkeitssteigerung wird durch die Reduzierung der Porosität durch expansive CA-Zementhydratation und die hohe spezifische Oberfläche sowie deren weitere Erhöhung durch die CA-Zementhydratation bewirkt.
Aus den einzelnen abbindekinetischen Effekten können, zusammen mit dem Stand der Technik und den neuen Erkenntnissen, mikrostrukturelle Abbindemodelle und Modelle zur Festigkeitsentwicklung der Feuerbetone abgeleitet werden. In Folge kann für die zwei Feuerbetone zu jedem Zeitpunkt des Abbindens eine Aussage zum Abbindefortschritt und zur Festigkeitsausprägung getätigt werden. Einige der Abbindemechanismen und festigkeitsbildenden Mechanismen können auf andere Feuerbetonzusammensetzungen übertragen werden.
Thousands of chemicals from daily use are being discharged from civilization into the water cycle via different pathways. Ingredients of personal care products, detergents, pharmaceuticals, pesticides, and industrial chemicals thus find their way into the aquatic ecosystems and may cause adverse impacts on the ecology. Pharmaceuticals for instance, represent a central group of anthropogenic chemicals, because of their designed potency to interfere with physiological functions in organisms. Ecotoxicological effects from pharmaceutical burden have been verified in the past. Therapeutic groups with pronounced endocrine disrupting potentials such as steroid hormones gain increasing focus in environmental research as it was reported that they cause endocrine disruption in aquatic organisms even when exposed to environmentally relevant concentrations. This thesis considers the comprehensive investigation of the occurrence of corticosteroids and progestogens in wastewater treatment plant (WWTP) effluents and surface waters as well as the elucidation of the fate and biodegradability of these steroid families during activated sludge treatment. For the first goal of the thesis, a robust and highly sensitive analytical method based on liquid chromatography-tandem mass spectrometry (LC-MS/MS) was developed in order to simultaneously determine the occurrence of around 60 mineralocorticoids, glucocorticoids and progestogens in the aquatic environment. A special focus was set to the compound selection due to the diversity of marketed synthetic steroids. Some analytical challenges have been approved by individual approaches regarding sensitivity enhancement and compound stabilities. These results may be important for further research in environmental analysis of steroid hormones. Reliable and low quantification limits are the perquisite for the determination of corticosteroids and progestogens at relevant concentrations due to low consumption volumes and simultaneously low effect-based trigger values. Achieved quantification limits for all target analytes ranged between 0.02 ng/L and 0.5 ng/L in surface water and 0.05 ng/L to 5 ng/L in WWTP effluents. This sensitivity enabled the detection of three mineralocorticoids, 23 glucocorticoids and 10 progestogens within the sampling campaign around Germany. Many of them were detected for the first time in the environment, particularly in Germany and the EU. To the best of our knowledge, this in-depth steroid screening provided a good overview of single steroid burden and allowed for the identification of predominantly steroids of each steroid
type analyzed for the first time. The frequent detection of highly potent synthetic steroids (e.g. triamcinolone acetonide, clobetasol propionate, betamethasone valerate, dienogest, cyproterone acetate) highlighted insufficient removal during conventional Summary wastewater treatment and indicated the need for regulation to control their emission since the steroid concentrations were found to be above the reported effect-based trigger values for biota. Overall, the study revealed reliable environmental data of poorly or even not analyzed steroids. The results complement the existing knowledge in this field but also providednew information which can beused particularly for compound prioritization in ecotoxicological research and environmental analysis. Based on the data obtained from the monitoring campaign, incubation experiments were conducted to enable the comparison of the biodegradability and transformation processes in activated sludge treatment for structure-related steroids under aerobic and standardized experimental conditions. The compounds were accurately selected to cover manifold structural moieties of commonly used glucocorticoids, including non-halogenated and halogenated steroids, their mono- and diesters, and several acetonide-type steroids. This approach allowed for a structure-based interpretation of the results. The obtained biodegradation rate constants suggested large variations in the biodegradability (half-lifes ranged from < 0.5 h to > 14 d). An increasing stability was identified in the order from non-halogenated steroids (e.g. hydrocortisone), over 9α-halogenated steroids (e.g. betamethasone), to C17-monoesters (e.g. betamethasone 17-valerate, clobetasol propionate), and finally to acetonides (e.g. triamcinolone acetonide), thus suggesting a strong relationship of the biodegradability with the glucocorticoid structure. Some explanations for this behavior have been received by identifying the transformation products (TPs) and elucidating individual transformation pathways. The results revealed the identification of the likelihood of transformation reactions depending on the chemical steroid structure for the first time. Among the identified TPs, the carboxylates (e.g. TPs of fluticasone propionate, triamcinolone acetonide) have been shown persistency in the subsequent incubation experiments. The newly identified TPs furthermore were frequently detected in the effluents of full-scale wastewater treatment plants. These findings emphasized i) the transferability of the lab-scale degradation experiments to real world and that ii) insufficient removals may cause adverse effects in the aquatic environment due to the ability of the precursor steroids and TPs to interact with the endocrine system in biota. For the last goal, the conceptual study for glucocorticoids was applied to progestogens.
Here, two sub-types of the steroid family frequently used for hormonal contraception were selected (17α-hydroxyprogesterone and 19-norstestosterone type). The progestogens showed a fast and complete degradation within six hours, and thus empathizes pronounced biodegradability. However, cyproterone acetate and dienogest Summary have been found to be more recalcitrant in activated sludge treatment. This was consistent with their ubiquitously occurrence during the previous monitoring campaign. The elucidation of TPs again revealed some crucial information regarding the observed behavior and highlighted furthermore the formation of hazardous TPs. It was shown that 19-nortestosterone type steroids are able to undergo aromatization at ring A in contact with activated sludge, leading to the formation of estrogen-like TPs with a phenolic moiety at ring A. In the case of norethisterone the formation of 17α-ethinylestradiol was confirmed, which is a well-known potent synthetic estrogen with elevated ecotoxicological potency. Thus, the results indicated for the very first time an unknown source of estrogenic compounds, particularly for 17α-ethinylestradiol. In conclusion, some steroids were found to be very stable in activated sludge treatment, others degrade well, and others which do degrade but predominantly to active TPs depending on their chemical structure. Fluorinated acetal steroids such as triamcinolone acetonide and fluocinolone acetonide are poorly biodegradable, which is reflected in high concentrations detected ubiquitously in WWTP effluents. Endogenous steroids and their most related synthetic once such as hydrocortisone, prednisolone or 17α-hydroxyprogesterone are readily biodegradable. Regardless their high influent concentrations, they are almost completely removed in conventional WWTPs. Steroids between this range have been found to form elevated quantities of TPs which are partially still active, which particularly the case for betamethasone, fluticasone propionate, cyproterone acetate or dienogest. The thesis illustrates the need for an extensive evaluation of the environmental risks and carried out that corticosteroids and progestogens merit more attention in environmental regulatory and research than it is currently the case
Speziell in Anwendungen mit intensiver Temperatur- und Korrosionsbeanspruchung finden vermehrt Phosphate als sogenannte chemische Binder für Hochleistungskeramiken Verwendung. Konkret ist die Summe der Reaktionsverläufe während des Bindemechanismus in Folge einer thermisch-induzierten Aushärtung und somit die Wirkungsweise von Phosphatbindern prinzipiell innerhalb der Fachliteratur nicht eindeutig untersucht. Innerhalb dieser Arbeit wurden aufbauend auf einer umfangreichen strukturanalytischen Prüfungsanordnung (Festkörper-NMR, RBA, REM-EDX) einer exemplarischen phosphatgebundenen Al₂O₃-MgAl₂O₄-Hochtemperaturkeramikzusammensetzung unter Einbeziehung verschiedenartiger anorganischer Phosphate grundlegende Bindemechanismen charakterisiert. Mechanisch-physikochemische Eigenschaftsuntersuchungen (STA, Dilatometrie, DMA, KBF) deckten zudem den Einfluss der eingesetzten Phosphate auf die Eigenschaftsentwicklungen der Feuerfestkeramiken bezüglich des Abbindeverhaltens, der Biegefestigkeit sowie der thermischen Längenänderung auf, welche mit Strukturänderungen korreliert wurden. Es wurde gezeigt, dass sich Bindemechanismen bei Verwendung von Phosphaten temperaturgeleitet (20 °C ≤ T ≤ 1500 °C) grundsätzlich aus zwei parallel ablaufenden Reaktionsabfolgen zusammensetzen, wobei die sich entwickelnden Phosphatphasen innerhalb der Keramikmasse quantitativ und qualitativ bezüglich ihrer Bindewirkung bewertet wurden. Zum einen wurde die Bildung eines festigkeitssteigernden Bindenetzwerks aus Aluminiumphosphaten meist amorpher Struktur identifiziert und charakterisiert. Dieses bindungsfördernde, dreidimensionale Aluminiumphosphatnetzwerk baut sich innerhalb der Initialisierungs- und Vernetzungsphasen temperaturgeleitet kontinuierlich über multiple Vernetzungsreaktionen homogen auf. Zum anderen werden Reaktionsabfolgen durch parallel ablaufende Strukturumwandlungen nicht aktiv-bindender Phosphatspezies wie Magnesium-, Calcium- oder Zirkoniumphosphate ergänzt, welche lediglich thermische Umwandlungsreaktionen der Ausgangsphosphate darstellen. Vermehrt bei T > 800 °C geht das phosphatische Bindenetzwerk Festkörperreaktionen mit MgAl₂O₄ unter Ausbildung und Agglomeration von Magnesium-Orthophosphat-Sinterstrukturen ein. Die Bildung dieser niedrigschmelzenden Hochtemperaturphasen führt zu einem teilweisen Bruch des Bindenetzwerks.
Water scarcity is already an omnipresent problem in many parts of the world, especially in sub-Saharan Africa. The dry years 2018 and 2019 showed that also in Germany water resources are finite. Projections and predictions for the next decades indicate that renewal rates of existing water resources will decline due the growing influence of climate change, but that water extraction rates will increase due to population growth. It is therefore important to find alternative and sustainable methods to make optimal use of the water resources currently available. For this reason, the reuse of treated wastewater for irrigation and recharge purposes has become one focus of scientific research in this field. However, it must be taken into account that wastewater contains so-called micropollutants, i.e., substances of anthropogenic origin. These are, e.g., pharmaceuticals, pesticides and industrial chemicals which enter the wastewater, but also metabolites that are formed in the human body from pharmaceuticals or personal care products. Through the treatment in wastewater treatment plants (WWTPs) as well as through chemical, biological and physical processes in the soil passage during the reuse of water, these micropollutants are transformed to new substances, known as transformation products (TPs), which further broaden the number of contaminants that can be detected within the whole water cycle.
Despite the fact that the presence of human metabolites and environmental TPs in untreated and treated wastewater has been known for a many years, they are rarely included in common routine analysis methods. Therefore, a first goal of this thesis was the development of an analysis method based on liquid chromatography - tandem mass spectrometry (LC-MS/MS) that contains a broad spectrum of frequently detected micropollutants including their known metabolites and TPs. The developed multi-residue analysis method contained a total of 80 precursor micropollutants and 74 metabolites and TPs of different substance classes. The method was validated for the analysis of different water matrices (WWTP influent and effluent, surface water and groundwater from a bank filtration site). The influence of the MS parameters on the quality of the analysis data was studied. Despite the high number of analytes, a sufficient number of datapoints per peak was maintained, ensuring a high sensitivity and precision as well as a good recovery for all matrices. The selection of the analytes proved to be relevant as 95% of the selected micropollutants were detected in at least one sample. Several micropollutants were quantified that were not in the focus of other current multi-residue analysis methods (e.g. oxypurinol). The relevance of including metabolites and TPs was demonstrated by the frequent detection of, e.g., clopidogrel acid and valsartan acid at higher concentrations than their precursors, the latter even being detected in samples of bank filtrate water.
By the integration of metabolites, which are produced in the body by biological processes, and biological and chemical TPs, the multi-residue analysis method is also suitable for elucidating degradation mechanisms in treatment systems for water reuse that, e.g., use a soil passage for further treatment. In the second part of the thesis, samples from two treatment systems based on natural processes were analysed: a pilot-scale above-ground sequential biofiltration system (SBF) and a full-scale soil aquifer treatment (SAT) site. In the SBF system mainly biological degradation was observed, which was clearly demonstrated by the detection of biological TPs after the treatment. The efficiency of the degradation was improved by an intermediate aeration, which created oxic conditions in the upper layer of the following soil passage. In the SAT system a combination of biodegradation and sorption processes occurred. By the different behaviour of some biodegradable micropollutants compared to the SBF system, the influence of redox conditions and microbial community was observed. An advantage of the SAT system over the SBF system was found in the sorption capacity of the natural soil. Especially positively charged micropollutants showed attenuation due to ionic interactions with negatively charged soil particles. Based on the physicochemical properties at ambient pH, the degree of removal in the investigated systems and the occurrence in the source water, a selection of process-based indicator substances was proposed.
Within the first two parts of this thesis a micropollutant was frequently detected at elevated concentrations in WWTPs effluents, which was not previously in the focus of environmental research: the antidiabetic drug sitagliptin (STG). STG showed low degradability in biological systems and thus it was investigated to what extend chemical treatment by ozonation can ensure attenuation of it. STG contains an aliphatic primary amine as the principal point of attack for the ozone molecule. There is only limited information about the behaviour of this functional group during ozonation and thus, STG served as an example for other micropollutants containing aliphatic primary amines. A pH-dependent degradation kinetic was observed due to the protonation of the primary amine at lower pH values. At pH values in the range 6 - 8, which is typical for the environment and in WWTPs, STG showed degradation kinetics in the range of 103 M-1s-1 and thus belongs to the group of readily degradable substances. However, complete degradation can only be expected at significantly higher pH values (> 9). The transformation of the primary amine moiety into a nitro group was observed as the major degradation mechanism for STG during ozonation. Other mechanisms involved the formation of a diketone, bond breakages and the formation of trifluoroacetic acid (TFA). Investigations at a pilot-scale ozonation plant using the effluent of a biological degradation of a municipal WWTP as source water confirmed the results of the laboratory studies: STG could not be removed completely even at high ozone doses and the nitro compound was formed as the main TP and remained stable during further ozonation and subsequent biological treatment. It can therefore be assumed that under realistic conditions both a residual concentration of STG and the formed main TP as well as other stable TPs such as TFA can be detected in the effluents of a WWTP consisting of conventional biological treatment followed by ozonation and subsequent biological polishing steps.