Refine
Year of publication
- 2019 (12) (remove)
Document Type
- Master's Thesis (7)
- Bachelor Thesis (4)
- Doctoral Thesis (1)
Keywords
Institute
- Institut für Wirtschafts- und Verwaltungsinformatik (12) (remove)
Business rules have become an important tool to warrant compliance at their business processes. But the collection of these business rules can have various conflicting elements. This can lead to a violation of the compliance to be achieved. This conflicting elements are therefore a kind of inconsistencies, or quasi incon- sistencies in the business rule base. The target for this thesis is to investigate how those quasi inconsistencies in business rules can be detected and analyzed. To this aim, we develop a comprehensive library which allows to apply results from the scientific field of inconsistency measurement to business rule formalisms that are actually used in practice.
The status of Business Process Management (BPM) recommender systems is not quite clear as research states. The use of recommenders familiarized itself with the world during the rise of technological evolution in the past decade.Ever since then, several BPM recommender systems came about. However, not a lot of research is conducted in this field. It is not well known to what broad are the technologies used and how are they used. Moreover, this master’s thesis aims at surveying the BPM recommender systems existing. Building on this, the recommendations come in different shapes. They can be positionbased where an element is to be placed at an element’s front, back or to autocomplete a missing link. On the other hand, Recommendations can be textual, to fill the labels of the elements. Furthermore, the literature review for BPM recommender systems took place under the guides of a literature review framework. The framework suggests 5stages of consecutive stages for this sake. The first stage is defining a scope for the research. Secondly, conceptualizing the topic by choosing key terms for literature research. After that in the third stage, comes the research stage.As for the fourth stage, it suggests choosing analysis features over which the literature is to be synthesized and compared. Finally, it recommends defining the research agenda to describe the reason for the literature review. By invoking the mentioned methodology, this master’s thesis surveyed 18 BPM recommender systems. It was found as a result of the survey that there
are not many different technologies for implementing the recommenders. It was also found that the majority of the recommenders suggest nodes that are yet to come in the model, which is called forward recommending. Also, one of the results of the survey indicated the scarce use of textual recommendations to BPM labels. Finally, 18 recommenders are considered less than excepted for a developing field therefore as a result, the survey found a shortage in the number of BPM recommender systems. The results indicate several shortages in several aspects in the field of BPM recommender systems. On this basis, this master’s thesis recommends the future work on it the results.
Engineering criminal agents
(2019)
This PhD thesis with the title "Engineering Criminal Agents" demonstrates the interplay of three different research fields captured in the title: In the centre are Engineering and Simulation, both set in relation with the application field of Criminology - and the social science aspect of the latter. More precisely,
this work intends to show how specific agent-based simulation models can be created using common methods from software engineering.
Agent-based simulation has proven to be a valuable method for social science since decades, and the trend to increasingly complex simulation models is apparent, not at least due to advancing computational and simulation techniques. An important cause of complexity is the inclusion of 'evidence' as basis of simulation models. Evidence can be provided by various stakeholders, reflecting their different viewpoints on the topic to model.
This poses a particular burden by interrelating the two relevant perspectives on the topic of simulation: on the one hand the user of the simulation model who provides the requirements and is interested in the simulation results, on the other hand the developer of the simulation model who has to program a verified and validated formal model. In order to methodically link these two perspectives, substantial efforts in research and development are needed, where this PhD thesis aims to make a contribution.
The practical results - in terms of software - were achieved by using the multi-faceted approach mentioned above: using methods from software engineering, in order to become able to apply methods from computational social sciences, in order to gain insights into social systems, such as in the internal dynamics of criminal networks.
The PhD thesis shows the research involved to create these practical results, and gives technical details and specifications of the developed software.
The frame for research and development to achieve these results was provided mainly by two research projects: OCOPOMO and GLODERS.
Social Network of Business Objects (SoNBO) is a concept for aggregating information distributed in he-terogeneous system landscapes and making it available via a single user interface. The central idea is to understand company information as a network (graph). There is already a SoNBO-Explorer which integrates the information of a customer relationship management system (CRM system). The challenge in configuring such an application is to identify the corporate network and thus find out how the stored data is linked within the company. A tool that can visualize the corporate network is helpful for this. In this thesis a selfdeveloped tool (SoNBO-Graph-App) is presented as a prototype, which realizes this visualization. With this application the configuration of the network in the SoNBO Explorer consisting of the merged data can be supported by carrying out that configuration on a graphical level. The prototype is connected to two different databases of a Customer Relationship Management (CRM) system and allows the aggregation of these data so that it is displayed as a graph in an overview. This gives the user a better insight and understanding of the relationship between the different data. This work is part of the longterm research project SoNBO, whose goal is a concept for the integration of information from different business application systems.
Unkontrolliert gewachsene Software-Architekturen zeichnen sich i.d.R. durch fehlende oder schlecht nachvollziehbare Strukturen aus. Hierfür können als Gründe beispielsweise mangelhafte Definitionen oder ein langsames Erodieren sein. Dies ist auch unter dem Begriff "Big Ball of Mud" bekannt. Langfristig erhöhen solche architekturellen Mängel nicht nur die Entwicklungskosten, sondern können letztendlich auch Veränderungen vollständig verhindern.
Die Software-Architektur benötigt somit eine kontinuierliche Weiterentwicklung, um solchen Effekten entgegen wirken zu können. Eine gute Software-Architektur unterstützt die Software-Entwicklung und erhöht die Produktivität. Auf der Ebene von Quellcode existieren bereits etablierte Vorgehensweisen zur kontrollierten Verbesserung der Qualität. Im Gegensatz hierzu existieren für Verbesserungen einer Software-Architektur jedoch keine allgemeingültigen Vorgehensweisen, welche unabhängig vom Anwendungsfall angewandt werden können. An diesem Punkt setzt die vorliegende Arbeit an.
Bisherige Arbeiten beschäftigen sich einerseits nur mit Teilpunkten des Problems. Anderseits existieren zwar bereits Vorgehensweisen zum Treffen von Architekturentscheidungen, jedoch agieren diese auf einer stark abstrakten Ebene ohne praktische Beispiele. Diese Arbeit stellt eine leichtgewichtige Vorgehensweise zum gezielten Verbessern einer Software-Architektur vor. Die Vorgehensweise basiert auf einem generischen Problemlösungsprozess. Auf dieser Basis ist ein Prozess zum Lösen von Problemen einer Software-Architektur entwickelt worden. Im Fokus der Arbeit stehen zur Eingrenzung des Umfanges architektonische Probleme aufgrund geforderter Variabilität sowie externer Abhängigkeiten.
Die wissenschaftliche Methodik, welcher der Arbeit zugrunde liegt, agiert im Rahmen der Design Science Research (DSR). Über mehrere Iterationen hinweg wurde eine Vorgehensweise entwickelt, welche sich an Softwareentwickler mit zwei bis drei Jahren Erfahrung und Kenntnissen über Grundlage der Softwareentwicklung und Software-Architektur richtet. Fünf Schritte inkl. Verweise auf aussagekräftige Literatur leiten Anwender anschließend durch den Prozess zur gezielten Verbesserung einer Software-Architektur.
Recently the workflow control as well as compliance analysis of the Enterprise Resource Planning systems are of a high demand. In this direction, this thesis presents the potential of developing a Workflow Management System upon a large Enterprise Resource Planning system by involving business rule extraction, business process discovery, design of the process, integration and compliance analysis of the system. Towards this, usability, limitations and challenges of every applied approach are deeply explained in the case of an existing system named SHD ECORO.
The main goal of this paper is to ascertain, if neural networks (especially LSTM) are helpful in predicting processes by making predictions as accurately as possible.
TensorFlow is the used framework in Python to build recurrent neural networks. Two networks are built, whereby one is used for training and the other one for prediction.
Used datasets contain several processes with several events each. With those processes, the network ist trained and afterwards, the parameters are saved. The network for prediction uses these parameters to make predictions.
The neural network is able to make clear predictions about subsequent events. Even branches can be predicted.
When developed further, integration in other programs is possible. It is recommended to use unique names for the events or to rename them.
Business Process Querying (BPQ) is a discipline in the field of Business Process Man- agement which helps experts to understand existing process models and accelerates the development of new ones. Its queries can fetch and merge these models, answer questions regarding the underlying process, and conduct compliance checking in return. Many languages have been deployed in this discipline but two language types are dominant: Logic-based languages use temporal logic to verify models as finite state machines whereas graph-based languages use pattern matching to retrieve subgraphs of model graphs directly. This thesis aims to map the features of both language types to features of the other to identify strengths and weaknesses. Exemplarily, the features of Computational Tree Logic (CTL) and The Diagramed Modeling Language (DMQL) are mapped to one another. CTL explores the valid state space and thus is better for behavioral querying. Lacking certain structural features and counting mechanisms it is not appropriate to query structural properties. In contrast, DMQL issues structural queries and its patterns can reconstruct any CTL formula. However, they do not always achieve exactly the same semantic: Patterns treat conditional flow as sequential flow by ignoring its conditions. As a result, retrieved mappings are invalid process execution sequences, i.e. false positives, in certain scenarios. DMQL can be used for behavioral querying if these are absent or acceptable. In conclusion, both language types have strengths and are specialized for different BPQ use cases but in certain scenarios graph-based languages can be applied to both. Integrating the evaluation of conditions would remove the need for logic-based languages in BPQ completely.
The goal of this thesis is to create a recommender system (RS) for business processes, based on the existing ProM plugin RegPFA. To accomplish this task, firstly an interface must be created that sets up and expands a database receiving probabilistic finite automata (PFA) created by RegPFA in tsml format as input. Secondly, a Java program must be designed that uses said database to recommend the process elements that are most likely to follow a given sequence of process elements.
The Internet of Things (IoT) is a fast-growing, technological concept, which aims to integrate various physical and virtual objects into a global network to enable interaction and communication between those objects (Atzori, Iera and Morabito, 2010). The application possibilities are manifold and may transform society and economy similarly to the usage of the internet (Chase, 2013). Furthermore, the Internet of Things occupies a central role for the realisation of visionary future concepts, for example, Smart City or Smart Healthcare. In addition, the utilisation of this technology promises opportunities for the enhancement of various sustainability aspects, and thus for the transformation to a smarter, more efficient and more conscious dealing with natural resources (Maksimovic, 2017). The action principle of sustainability increasingly gains attention in the societal and academical discourse. This is reasoned by the partly harmful consumption and production patterns of the last century (Mcwilliams et al., 2016). Relating to sustainability, the advancing application of IoT technology also poses risks. Following the precautionary principle, these risks should be considered early (Harremoës et al., 2001). Risks of IoT for sustainability include the massive amounts of energy and raw materials which are required for the manufacturing and operation of IoT objects and furthermore, the disposal of those objects (Birkel et al., 2019). The exact relations in the context of IoT and sustainability are insufficiently explored to this point and do not constitute a central element within the discussion of this technology (Behrendt, 2019). Therefore, this thesis aims to develop a comprehensive overview of the relations between IoT and sustainability.
To achieve this aim, this thesis utilises the methodology of Grounded Theory in combination with a comprehensive literature review. The analysed literature primarily consists of research contributions in the field of Information Technology (IT). Based on this literature, aspects, solution approaches, effects and challenges in the context of IoT and sustainability were elaborated. The analysis revealed two central perspectives in this context. IoT for Sustainability (IoT4Sus) describes the utilisation and usage of IoT-generated information to enhance sustainability aspects. In contrast, Sustainability for IoT (Sus4IoT) fo-cuses on sustainability aspects of the applied technology and highlights methods to reduce negative impacts, which are associated with the manufacturing and operation of IoT. Elaborated aspects and relations were illustrated in the comprehensive CCIS Framework. This framework represents a tool for the capturing of relevant aspects and relations in this context and thus supports the awareness of the link between IoT and sustainability. Furthermore, the framework suggests an action principle to optimise the performance of IoT systems regarding sustainability.
The central contribution of this thesis is represented by the providence of the CCIS Framework and the contained information regarding the aspects and relations of IoT and sustainability.