Refine
Year of publication
Document Type
- Doctoral Thesis (93) (remove)
Keywords
- Pflanzenschutzmittel (8)
- Pestizid (6)
- Landwirtschaft (5)
- ecotoxicology (4)
- Grundwasserfauna (3)
- Insektizid (3)
- Pesticides (3)
- agriculture (3)
- pesticide (3)
- risk assessment (3)
Institute
- Fachbereich 7 (93) (remove)
Factors triggering the ecotoxicity of metal-based nanoparticles towards aquatic invertebrates
(2015)
Nanoparticles are produced and used in huge amounts increasing their probability to end up in surface waters. There, they are subject to environmentally driven modification processes. Consequently, aquatic life may be exposed to different nanoparticle agglomerate sizes, while after sedimentation benthic organisms are more likely to be affected.
However, most ecotoxicity studies with nanoparticles exclusively investigated implications of their characteristics (e.g. size) on pelagic organisms, ignoring environmentally modified nanoparticles. Therefore, a systematic assessment of factors triggering the fate and toxicity of nanoparticles under environmentally relevant conditions is needed. The present thesis, therefore, investigates the implications of nanoparticle related factors (i.e., inherent material-properties and nanoparticle characteristics) as well as environmental conditions towards the pelagic living organism Daphnia magna and the benthic species Gammarus fossarum. In detail, inert titanium dioxide (nTiO2) and ion-releasing silver nanoparticles (nAg), both of varying particle characteristics (e.g. initial size), were tested for their toxicity under different environmental conditions (e.g. ultraviolet-light (UV-light)).
The results indicate that the toxicity of nTiO2 and nAg is mainly determined by: their adsorption potential onto biota, and their fate in terms of reactive oxygen species or Ag+ ion release. Thus, inherent material-properties, nanoparticle characteristics and environmental conditions promoting or inhibiting these aspects revealed significant implications in the toxicity of nTiO2 and nAg towards daphnids.
Furthermore, the presence of ambient UV-light, for example, adversely affected gammarids at 0.20 mg nTiO2/L, while under darkness no effects occurred even at 5.00 mg nTiO2/L. Hence, the currently associated risk of nanoparticles might be underestimated if disregarding their interaction with environmental parameters
Worldwide one third to one half of the freshwater crayfish species are threatened with population decline or extinction. Besides habitat deterioration, pollution, and other man-made environmental changes, invasive species and pathogens are major threats to the survival of European crayfish species. Freshwater crayfish are the largest freshwater invertebrates and strongly influence the structure of food webs. The disappearance of crayfish from a water body may change the food web and could have dramatic consequences for an ecosystem.rnOne goal in modern species conservation strategies is the conservation of genetic diversity, since genetic diversity is an advantage for the long-term survival of a species. The main aim of my thesis was to reveal the genetic structure and to identify genetic hotspots of the endangered noble crayfish (Astacus astacus) throughout Europe (part 1 of my thesis). Since the most significant threat to biodiversity of European crayfish species is the crayfish plague pathogen Aphanomyces astaci I studied new aspects in the distribution of A. astaci (part two of my thesis). The results serve as a basis for future conservation programs for freshwater crayfish. In the first part of my thesis I conducted a phylogeographic analysis of noble crayfish using mitochondrial DNA and nuclear microsatellite data. With these methods I aimed to identify its genetic hotspots and to reconstruct the recolonization history of central Europe by this species. I detected high genetic diversities in southestern Europe indicating that noble crayfish outlasted the cold climate phases during the Pleistocene in this region (Appendix 1). Because of the high genetic diversity found there, southeastern Europe is of particular importance for the conservation of noble crayfish. The mitochondrial DNA analysis points to a bifurcated colonization process from the eastern Black Sea basin to a) the North Sea and to b) the Baltic Sea basin (Appendix 2). A second independent refugium that was localized on the Western Balkans did not contribute to the colonization of central Europe. Furthermore, I found that the natural genetic structure is dissolved, probably due to the high human impact on the distribution of noble crayfish (e.g. artificial translocation). In the second part of this thesis using real-time PCR I identified calico crayfish (Orconectes immunis) as the fourth North American crayfish species to be carrier of the agent of the crayfish plague (Appendix 3). Furthermore I detected the crayfish plague pathogen in American spiny-cheek crayfish (Orconectes limosus) and native narrow-clawed crayfish (Astacus leptodactylus) in the lower Danube in Romania (Appendix 4). The distribution of infected spiny-cheek crayfish poses a threat to the native biodiversity in southeastern Europe and shows the high invasion potential of this crayfish species. Moreover, I found that even the native narrow-clawed crayfish in the Danube Delta, about 970 km downstream of the current invasion front of American crayfish, is a carrier of A. astaci (Appendix 5). This finding is of high importance, as the native species do not seem to suffer from the infection. In Appendix 6 I elucidate demonstrate that the absence of the crayfish plague agent is the most likely explanation for the coexistence of populations of European and American crayfish in central Europe. In my thesis I show that the common assumption that all North American crayfish are carrier of A. astaci and that all native crayfish species die when infected with A. astaci does not hold true. The studies presented in my thesis reveal new aspects that are crucial for native crayfish conservation: 1) The genetic diversity of noble crayfish is highest in southeastern Europe where noble crayfish outlasted the last glacial maximum in at least two different refugia. 2) Not all American crayfish populations are carrier of A. astaci and 3) not all Europen crayish populations die shortly after being infected with the crayfish plague pathogen.rnTo conserve native crayfish species and their (genetic) diversity in the long term, further introductions of American crayfish into European waters must be avoided. However, the introduction will only decrease if the commercial trade with non-indigenous crayfish species is prohibited.
To assess the effect of organic compounds on the aquatic environment, organisms are typically exposed to toxicant solutions and the adverse effects observed are linked to the concentration in the surrounding media. As compounds generally need to be taken up into the organism and distributed to the respective target sites for the induction of effects, the internal exposure is postulated to best represent the observed effects.
The aim of this work is to contribute to an improved effect assessment of organic compounds by describing experimental and modelling methods to obtain information on the internal exposure of contaminants in organisms.
Chapter 2 details a protocol for the determination of bioconcentration parameter for uptake (k1) and elimination (k2) of organic compounds in zebrafish (Danio rerio) eggs. This enables the simulation of the internal exposure in zebrafish eggs from an ambient exposure concentration over time. The accumulated contaminant amount in zebrafish eggs was also determined, using a biomimetic extraction method. Different bioconc-entration estimation models for the determination of internal steady-state concentrat-ion of pharmaceutical compounds in fish to an environmental exposure are presented in Chapter 3. Bioconcentration factors were estimated from the compounds octanol: water partition coefficient (KOW) to determine the internal exposure to an ambient concentration.
To assess the integral bioavailable fraction from the water and sediment phase of environmental contaminants for rooted aquatic plants, the internal exposure in river-living Myriophyllum aquaticum plants were determined over time, presented in Chapter 4. The plants were collected at different time points, with the accumulated organic contaminants determined using a liquid extraction method.
In Chapter 5 a protocol was established to enable the non-invasive observation of effects in M. aquaticum plants exposed to contaminated sediments over time. Since the toxicant effects are a result of all uptake and distribution processes to the target site and the toxico-dynamic process leading to an observed effect during static exposure, information on the internal exposure could thus be gained from the temporal effect expression.rn
Field margins are often the only remaining habitats of various wild plant species in agricultural landscapes. However, due to their proximity to agricultural fields, the vegetation of field margins can be affected by agrochemicals applied to the crop fields. The aim of this thesis was to investigate the individual and combined effects of herbicide, insecticide and fertilizer inputs on the plant community of a field margin. Therefore, a 3-year field experiment with a randomized block design including seven treatments (H: herbicide, I: insecticide, F: fertilizer, H+I, F+I, F+H and F+H+I) and one control was conducted on a low-production meadow. Each treatment was replicated 8 times in 8 m x 8 m plots with a distance of 2 m between each plot. The fertilizer rates (25 % of the field rate) and pesticide rates (30 % of the field rate) used for the plot applications were consistent with realistic average input rates (overspray + drift) in the first meter of a field margin directly adjacent to a wheat field.
The study revealed that fertilizer and herbicide misplacements in field margins are major factors that affect the natural plant communities of these habitats. In total, 20 of the 26 abundant species on the study site were significantly affected by the fertilizer and herbicide treatment. The fertilizer promoted plants with high nutrient uptake and decreased the frequencies of small species. The herbicide caused a nearly complete disappearance of three species directly after the first application, whereas sublethal effects (e.g., phytotoxic effects and reduced seed productions of up to 100 %) were observed for the other affected species. However, if field margins are exposed to repeated agrochemical applications over several years, then such sublethal effects (particularly reproduction effects) also reduce the population size of plant species significantly, as observed in this study.
Significant herbicide-fertilizer interaction effects were also detected and could not be extrapolated from individual effects. The fertilizer and herbicide effects became stronger over time, leading to shifts in plant community compositions after three years and to a 15 % lower species diversity than in the control. The insecticide significantly affected the frequencies of two plant species (1 positively and 1 negatively). The results of the experiment suggest that a continuous annual agrochemical application on the study site would cause further plant community shifts and would likely lead to the disappearance of certain affected plants. A clear trend of increasing grass dominance at the expense of flowering herbs was detected. This finding corresponds well with monitoring data from field margins near the study site.
Although herbicide risk assessment aims to protect non-target plants in off-field habitats from adverse effects, reproduction effects and combined effects are currently not considered. Furthermore, no regulations for fertilizer applications next to field margins exist and thus, fertilizer misplacements in field margins are likely to occur and to interact with herbicide effects.
Adaptations of the current risk assessment, a development of risk mitigation measures (e.g., in-field buffers) for the application of herbicides and fertilizers, and general management measures for field margins are needed to restore and conserve plant diversity in field margins in agricultural landscapes.
Quellen sind hochdiverse Lebensräume mit einer stark spezialisierten Fauna, wobei noch Lücken im Verständnis der besiedlungsrelevanten Faktoren für die aquatische Makrofauna bestehen, so dass die Arbeit einen klärenden Beitrag hinsichtlich anthropogener Veränderungen und ihrer Auswirkungen auf die Besied-lung leisten will. Basierend auf Daten von 334 Quellen aller Grundwasserlandschaften von Rheinland-Pfalz wurden die Quellen morphologisch und faunistisch bewertet. Außerdem wurden die Quellen des Landes morphologisch typisiert, Referenzquellen analysiert und ein Ansatz für die morphologische und faunistische Leitbildentwicklung gegeben. Außerdem wird ein selbst entwickeltes, kompaktes Kartier- und Bewertungsverfahren zur Quellstruktur vorgestellt, wo bislang noch ein Defizit bestand. Das Verfahren erfasst in einem Erfassungsbogen alle ökologisch bedeutsamen Strukturparameter und bewertet in einem 5-stufigen System. Quellen sind hochdiverse Lebensräume mit kleinen Populationen in isolierter Lage. Bei der Untersuchung der 310 Quellen wurden insgesamt 292 Arten bzw. höhere Taxa des Makrozoobenthos nachgewiesen. Es wurden 89 quellassoziierte Taxa gezählt, hiervon waren 24 krenobiont und 65 krenophil. Der Anteil der quellassoziierten Fauna an der Gesamtfauna lag bei über 30%. Es fanden sich 19 Erstnachweise für Rheinland-Pfalz, 9 besondere Nachweise (seltene Arten) und 19 Rote-Liste-Arten. Erstnachweise fanden sich in wenig bearbeiteten Dipterengruppen, vor allem den Psychodidae (13), Limoniidae (5) und ferner den Simu-liidae (1). Bei den Köcherfliegen wurden etliche seltene Arten gefunden, welche bisher in Rheinland-Pfalz kaum gefunden wurden. Häufigere krenobionte Taxa waren Crunoecia irrorata, Bythinella dunkeri, Niphar-gus sp., Pisidium personatum, Salamandra salamandra, Thaumalea sp., Agabus guttatus, Crenobia alpina, Oxycera sp. und Beraea maura. Die durchschnittliche Taxazahl pro Quelle betrug 11, die maximale 62 Taxa. Schüttung und Morphologie der Quellen waren von Naturraum und Grundwasserlandschaft abhängig, so schütteten etwa Buntsandsteinquellen ergiebiger und konstanter als Tonschieferquellen. Quellen spiegeln die Hydrologie ihrer Einzugsgebiete wider, so dass in verschiedenen hydrogeologischen Einheiten die chemischen Parameter differierten. In einzelnen Quellen schwankte die Hydrochemie jahreszeitlich aber nur gering. Der pH-Wert etwa war im Quellwasser versauerungsgefährdeter Gebiete niedrig (Hunsrück, Pfälzer-wald), der Nitratgehalt anthropogen bedingt hoch in intensiv landwirtschaftlich genutzten Räumen. Die morphologische Quelltypologie, welche sich in erster Linie auf gängige Quelltypen stützte, ergab in elf hydrogeologischen Quelltypenräumen vier Basisquelltypen und fünf geochemische Sondertypen. Die Wan-derquelle wurde neu hinzu genommen. Die landesweite Verteilung der Quelltypen ergab bei ungefassten Quellen 57 % Sicker-, 32 % Sturz-, 9 % Tümpel- und über 2 % Wanderquellen. Wanderquellen dürften aber noch öfter vorkommen. Relief und Substrateigenschaften waren entscheidende Faktoren für die Typologie, so dass etwa Sturzquellen vor allem im Buntsandstein häufig waren, während Sickerquellen im Tonschiefer des rheinischen Schiefergebirges dominierten. Es wurden 85 Strukturreferenzquellen als typische, naturnahe Beispiele für einzelne Quelltypenräume genannt. Etwa zwei Drittel aller Quellen waren strukturell beein-trächtigt bis stark geschädigt, 59 % gefasst. Fassungen, Verrohrungen und Betonverbau waren ökologisch besonders bedeutsam. In Regionen mit intensiver Landwirtschaft lagen generell die stärksten Schädigungen vor. Im Forst waren Quellen durch Nadelholzmonokulturen und in den Hochlagen pufferarmer Mittelgebirge durch Versauerung geschädigt. Hinsichtlich der Besiedlung ergaben sich Unterschiede zwischen den Naturräumen, beeinflusst durch die Faktoren Geologie, Hydrochemie, Schüttungsverhältnisse, Landnutzung im Einzugsgebiet sowie die Struk-turvielfalt an der Quelle. Strukturell unveränderte und unversauerte Quellen besaßen im Schnitt höhere Ta-xazahlen. Einzelne Faktoren mit Einfluss auf die Besiedlung wurden in ihrer Auswirkung getestet. In Quel-len ist die Versauerung grundsätzlich besiedlungsbeschränkend und überlagert strukturelle Faktoren. Bei niedrigen pH-Werten kommt es zu verminderten Taxazahlen, allerdings sind viele Quellorganismen offen-sichtlich an eine leichte Versauerung angepasst, da in sauren Quellen der Anteil der Quellfauna höher war. Außerdem ergab die Untersuchung, dass neue und intakte Fassungen weniger Taxa und Quelltaxa aufwiesen, während bei alten und verfallenen Fassungen oft eine hohe Quelltaxazahl vorlag, so dass diese als sekundär ökologisch wertvoll zu bezeichnen sind. Die Umfeldnutzung und die Größe des Quellbereichs sind ebenfalls wichtig, so dass Quellen in Laub- und Mischwald sowie in extensivem Grünland am besten besiedelt waren. Die stärksten statistischen Zusammenhänge mit der faunistischen Besiedlung ergaben sich bei den Bewer-tungsergebnissen des Strukturverfahrens, was zeigt, dass das Verfahren realistisch bewertet. Multivariate statistische Methoden dienten der Ermittlung von Besiedlungsfaktoren und der Leitbildentwick-lung. Es ergab sich eine unterschiedliche Besiedlung bei verschiedener Hydrogeologie und Hydrochemie sowie bei verschiedenen Quelltypen. Allerdings waren die Ergebnisse nicht eindeutig, so dass die Trennung der Quelltypen nur teilweise gelang und die Quelltypen von den Grundwasserlandschaften überlagert waren. Die Faunenunterschiede verschiedener Regionen waren größer als die einer Region, so dass morphologische Quelltypen faunistisch nur innerhalb einer hydrogeologischen Einheit von Bedeutung sind. Es wurden regionale faunistische Leitarten für vier Grundwasserlandschaften genannt, wobei sich auf wenige hochstete Quellarten beschränkt wurde. Die Arbeit zeigt, dass faunistisch orientierte Leitbilder nur unter Schwierigkeiten anzugeben sind und vollständige Typuszönosen für größere Gebiete grundsätzlich in Frage zu stellen sind. Sehr häufige grundsätzliche Leitarten für Quellen silikatischer Mittelgebirge in Rheinland-Pfalz sind Crunoecia irrorata und Bythinella dunkeri.
In der Biologie stellt das Zeichnen eine zentrale Arbeitstechnik dar. Viele Studien konnten auf einen positiven Effekt des Zeichnens für bestimmte Situationen hinweisen. Schülerinnen und Schüler müssen diese Technik jedoch zunächst erlernen. Hierbei können zahlreiche Schwierigkeiten auftreten, die die inhaltliche Auseinandersetzung gefährden. Jedoch wurden sowohl Schwierigkeiten im Umgang mit unterschiedlichen Repräsentationsformen als auch der Zeichenprozess bislang nur lückenhaft untersucht. Die Studie dieser Arbeit hat daher zum Ziel, (I) den Zeichenprozess auf der Ebene der Sichtstruktur zu beschreiben, (II) die manifesten Schwierigkeiten von Lernenden zu erfassen, auf die sie während der Konstruktion biologisch bedeutsamer Repräsentationsformen (Ablaufdiagramme, mikroskopische Zeichnungen) treffen, (III) und auf Grundlage der empirischen Befunde Schülertypen abzuleiten. Vor diesem Hintergrund waren 21 Schülerinnen und Schüler angehalten, jeweils ein Ablaufdiagramm auf Grundlage eines Texts und eine mikroskopische Zeichnung auf Grundlage eines Präparats zu konstruieren und dabei laut zu denken. Fragen zur Vorerfahrung sowie retrospektiv gestellte Fragen zum Vorgehen der Teilnehmenden umrahmten den videografisch dokumentierten Prozess. Die Ergebnisse zeigen, dass der Zeichenprozess mehr als zehn unterschiedliche Tätigkeiten umfassen kann, wobei die Kerntätigkeit des Zeichnens durchschnittlich nur rund ein Drittel des Prozesses ausmacht. Die Prozessstruktur zwischen Fällen variiert erheblich. Weiterhin konnten etwa 30 Schwierigkeiten bzw. Fehler identifiziert werden, die während der Konstruktion beider Repräsentationsformen auftreten. Diese können dabei sowohl einzelne als auch mehrere Tätigkeiten betreffen und zu Tätigkeitsabbrüchen führen. Schwierigkeiten stehen häufig in Verbindung mit Tätigkeiten, die außerhalb der Kerntätigkeit des Zeichnens liegen (z. B. Abgleich mit der Textgrundlage). Bezogen auf Ablaufdiagramme stellt das Verhältnis depiktional bzw. deskriptional dargestellter Textinformationen den Ausgangspunkt der Typisierung dar: Typ I: realistisch abbildend, II: alternierend abbildend und III: schriftorientiert abbildend. Für mikroskopische Zeichnungen war die Häufigkeit des Abgleichs mit dem Objekt grundlegend für die Typisierung: Typ I: oberflächlich abbildend, II: objektorientiert abbildend und III: undifferenziert detailliert abbildend. Die Studie liefert erstmals Kategoriensysteme, die es erlauben, die Prozessstruktur des Zeichnens sichtbar und zwischen Fällen vergleichbar zu machen sowie schwierigkeitsbezogenes Grundlagenwissen zur Konstruktion von Zeichnungen, basierend auf Texten und Beobachtungen. Die Übertragbarkeit der Befunde auf andere Repräsentationsformen ist an vielen Stellen denkbar. Die theoretisch fundierte Systematisierung von Schwierigkeiten kann von weiterführenden Untersuchungsansätze aufgegriffen werden und erlaubt die Verortung situationsangemessener Unterstützungsmaßnahmen.
Die deutsche Holzhausbranche wächst seit Jahren, allerdings beschäftigen sich die Unternehmen nicht strategisch mit dem Thema Marketing. Diese Dissertation bildet durch qualitative und quantitative Bewohnerbefragungen die Basis für die Entwicklung eines strategischen Marketingansatzes im Holzhausbereich.
Chemical plant protection is an essential element in integrated pest management and hence, in current crop production. The use of Plant Protection Products (PPPs) potentially involves ecological risk. This risk has to be characterised, assessed and managed.
For the coming years, an increasing need for agricultural products is expected. At the same time, preserving our natural resources and biodiversity per se is of equally fundamental importance. The relationship of our economic success and cultural progress to protecting the environment has been made plain in the Ecosystem Service concept. These distinct 'services' provide the foundation for defining ecological protection goals (Specific Protection Goals, SPGs) which can serve in the development of methods for ecological risk characterisation, assessment and management.
Ecological risk management (RM) of PPPs is a comprehensive process that includes different aspects and levels. RM is an implicit part of tiered risk assessment (RA) schemes and scenarios, yet RM also explicitly occurs as risk mitigation measures. At higher decision levels, RM takes further risks, besides ecological risk, into account (e.g., economic). Therefore, ecological risk characterisation can include RM (mitigation measures) and can be part of higher level RM decision-making in a broader Ecosystem Service context.
The aim of this thesis is to contribute to improved quantification of ecological risk as a basis for RA and RM. The initial general objective had been entitled as "… to estimate the spatial and temporal extent of exposure and effects…" and was found to be closely related to forthcoming SPGs with their defined 'Risk Dimension'.
An initial exploration of the regulatory framework of ecological RA and RM of PPPs and their use, carried out in the present thesis, emphasised the value of risk characterisation at landscape-scale. The landscape-scale provides the necessary and sufficient context, including abiotic and biotic processes, their interaction at different scales, as well as human activities. In particular, spatially (and temporally) explicit landscape-scale risk characterisation and RA can provide a direct basis for PPP-specific or generic RM. From the general need for tiered landscape-scale context in risk characterisation, specific requirements relevant to a landscape-scale model were developed in the present thesis, guided by the key objective of improved ecological risk quantification. In principle, for an adverse effect (Impact) to happen requires a sensitive species and life stage to co-occur with a significant exposure extent in space and time. Therefore, the quantification of the Probability of an Impact occurring is the basic requirement of the model. In a landscape-scale context, this means assessing the spatiotemporal distribution of species sensitivity and their potential exposure to the chemical.
The core functionality of the model should reflect the main problem structures in ecological risk characterisation, RA and RM, with particular relationship to SPGs, while being adaptable to specific RA problems. This resulted in the development of a modelling framework (Xplicit-Framework), realised in the present thesis. The Xplicit-Framework provides the core functionality for spatiotemporally explicit and probabilistic risk characterisation, together with interfaces to external models and services which are linked to the framework using specific adaptors (Associated-Models, e.g., exposure, eFate and effect models, or geodata services). From the Xplicit-Framework, and using Associated-Models, specific models are derived, adapted to RA problems (Xplicit-Models).
Xplicit-Models are capable of propagating variability (and uncertainty) of real-world agricultural and environmental conditions to exposure and effects using Monte Carlo methods and, hence, to introduce landscape-scale context to risk characterisation. Scale-dependencies play a key role in landscape-scale processes and were taken into account, e.g., in defining and sampling Probability Density Functions (PDFs). Likewise, evaluation of model outcome for risk characterisation is done at ecologically meaningful scales.
Xplicit-Models can be designed to explicitly address risk dimensions of SPGs. Their definition depends on the RA problem and tier. Thus, the Xplicit approach allows for stepwise introduction of landscape-scale context (factors and processes), e.g., starting at the definitions of current standard RA (lower-tier) levels by centring on a specific PPP use, while introducing real-world landscape factors driving risk. With its generic and modular design, the Xplicit-Framework can also be employed by taking an ecological entity-centric perspective. As the predictive power of landscape-scale risk characterisation increases, it is possible that Xplicit-Models become part of an explicit Ecosystem Services-oriented RM (e.g., cost/benefit level).
The increasing application of titanium dioxide nanoparticles (nTiO2) entails an increased risk regarding their release to surface water bodies, where they likely co-occur with other anthropogenic stressors, such as heavy metals. Their co-occurrence may lead to an adsorption of the metal ions onto the particles. These nanoparticles often sediment, due to their agglomeration, and thus pose a risk for pelagic or benthic species. The combined toxicity of nTiO2 and heavy metals is likely influenced by the properties of both stressors (since they may alter their interaction) and by environmental parameters (e.g., organic matter, pH, ionic strength) affecting their fate.
These issues were not yet systematically examined by the recent literature. Therefore, this thesis investigated the influence of nTiO2-products with differing crystalline phase composition on the toxicity of copper (as representative for heavy metals) in presence of different organic matters using the pelagic test organism Daphnia magna.
Moreover, the duration of the stressors` interaction (=aging) likely modulates the combined toxicity. Hence, the influence of nTiO2 on copper toxicity after aging as a function of environmental parameters (i.e., organic matter, pH, ionic strength) was additionally investigated.
Finally, the transferability of the major findings to benthic species was examined using Gammarus fossarum. The present thesis discovered a reduction of the copper toxicity facilitated by nTiO2 for all assessed scenarios, while its magnitude was determined by the surface area and structure of nTiO2, the quantity and quality of organic matter as well as the aging of both stressors. The general copper toxicity reduction by nTiO2 was also transferable to benthic species, despite their potentially increased exposure due to the sedimentation of nTiO2 with adsorbed copper. These observations suggest the application of nTiO2 as remediation agent, but potential side effects (e.g., chronic toxicity, reactive oxygen species formation) require further investigations. Moreover, questions regarding the transferability to other stressors (e.g., different heavy metals, organic chemicals) and the fate of stressors adsorbed to nTiO2 in aquatic ecosystems remain open.
New media are continually gaining importance in society. This process also has an increasing influence on developments in the field of education. Due to the use of computers as an integral part of schooling, new possibilities with regard to the organisation of learning processes arise. In this context, it is of great significance that appropriate computer applications for the respective learning group be prepared, so that justifiable use of computers in lessons can take place. Furthermore, efficient integration of computers requires changes in spatial organisation, in teaching methodology and in the role of the teacher. Such reflection and re-orientation are the essential basis for meaningful usage of new media in teaching and learning processes. An initial aim of this thesis is an empirical analysis of the situation regarding the usage of computers in geometry lessons in primary schools, based on a regional survey. The evaluation gives information as to how intensively the computer is used in the learning process and shows us which factors determine the use of computers in geometry lessons.
The results are an empirical foundation for the development of a computer-based learning environment called "Geolizi" (the second aim of my study). Within this learning environment, the pupils should work independently on the topics "mirror-imaged figures" and "the construction of rectangles and squares", with the help of the computer. During this process, hands-on media, traditional drawing instruments and interactive worksheets are available to the pupils. The computer (with its appropriate applications) takes over different functions in this learning process. Testing of this learning environment ("Geolizi") took place in several primary school classes, within the scope of formative and summative evaluation. With the help of questionnaires filled in by the pupils, the usability of the individual elements was tested. Based on a pre-post-investigation design, an attempt has been made to discover possible changes in the attitude of teachers regarding the usage of computers in the teaching of elementary geometry.
The results of this test phase, together with the evaluation of the questionnaires, lead to the founded presumption that usage of the multimedia-based learning environment " Geolizi " could result in greater use of computers in geometry lessons. All in all, the developed learning environment demonstrates an interesting possibility of how to use computers in the teaching of geometry at primary schools, thus making an important contribution to an independent, individualised learning process.
Gibt es unterschiedliche Qualitäten für das Wohnumfeld von Bewohnern ländlicher Siedlungen in der südlichen Pfalz? Wie könnte man diese Unterschiede quantifizierbar machen? Dies sind die beiden zentralen Fragen dieser Arbeit. Die Raummerkmale sollen zunächst objektiv erfasst werden. In einem weiteren Schritt werden die subjektiven Einschätzungen der Bevölkerung ermittelt und schließlich mit der objektiven Aufnahme verglichen. Zu diesem Zweck wur¬den 12 Ortschaften im Bereich der südlichen Pfalz ausgewählt. Jeweils vier Siedlungen verteilen sich auf den Pfälzerwald (Wilgartswiesen, Bundenthal, Ludwigswinkel, Silz), auf die Weinstraße (Siebeldingen, Göcklingen, Oberotterbach, Pleisweiler-Oberhofen) und auf die Rheinebene (Kapsweyer, Winden, Hayna, Büchelberg). Ein klar umgrenzter geographischer Raum wurde um jede Siedlung im Hinblick auf natürliche Gunst-/Ungunstfaktoren (aus den Bereichen Geologie, Boden, Geomorphologie, Klima, Hydrologie und Vegetation) und kulturhistorische Gunst-/Ungunstfaktoren (aus den Bereichen Siedlung, Flur, Mensch) mit ausgewählten aussagekräftigen Parametern untersucht. Diese wurden zu Merkmalskomplexen zusammengeführt und die dabei gewonnenen Erkenntnisse mit einem Bewertungsraster verknüpft und den einzelnen Orten zugeordnet. Die menschlichen Einschätzungen der gegebenen und auch der gemachten Umwelt sollen in die Überlegungen mit einfließen, und deshalb sind Befragungen der Einwohner durchgeführt worden. So erhielt man Erkenntnisse sowohl über die objektiven Lebensraumbedingungen als auch über die subjektiven Lebensraumbewertungen des Untersuchungsraumes. Eine zentrale Rolle spielt hier also der Raum mit seinen Verflechtungen, Interaktionen und Systembeziehungen für das menschliche Leben darin. Zur Ermittlung der objektiven Merkmale der Siedlungen wurden die folgenden Parameter erfasst: Ortseingänge, Naturnähe, Vielfalt, Eigenart, Ästhetik, Klima, Raum, Lärm/Luft, Erdbeben und Ertrag. Orte mit hohem Waldanteil (v. a. Pfälzerwaldorte) wiesen bessere Bewertungen in den Kategorien Naturnähe, Vielfalt, Ästhetik und Klima auf. Orte mit höheren Reb- und Ackerfluranteilen schnitten bei der Eigenart und dem Ertrag besser ab. Deshalb wurden die Orte im Pfälzerwald insgesamt und durchschnittlich am besten bewertet, gefolgt von den Siedlungen der Rheinebene und der Weinstraße. Diese Ergebnisse wurden anschließend mit den Ergebnissen der Befragungen in den einzelnen Orten, welche selbst sehr unterschiedlich ausfielen, verglichen. Dabei musste festgestellt werden, dass die Bewertung der lebensräumlichen Gegebenheiten durch die Befragten in der Regel besser ausfiel als deren objektive Einstufung. Am zufriedensten sind und am besten bewertet haben die Bewohner der Pfälzerwaldorte, gefolgt von denen der Rheinebene und der Weinstraße. Diese somit feststellbare positive Korrelation lässt vermuten, dass zukünftiges Planen im Meinungsbild der Bevölkerung, die schließlich besonders davon betroffen ist, auch akzeptiert werden kann. Öffentlichkeitsarbeit und die Aufklärung der Bevölkerung in lebensraumrelevanten Angelegenheiten sollten dabei nicht vernachlässigt werden.
The polysaccharide hydration phenomenon is nowadays the subject of intense research. The interaction of native and modified polysaccharides and polysaccharides-based bioconjugates with water has an important influence on their functional behaviour. Notwithstanding that the hydration phenomenon has been studied for decades, there is still a lack of awareness about the influence of hydration water on the polysaccharide´s structure and consequences for industrial or medicinal applications. The hydration of polysaccharides is often described by the existence of water layers differing in their physical properties depending on the distance from the polysaccharide. Using the differential scanning calorimetry (DSC) such water layers were categorized according their properties upon cooling in hyaluronan (HYA, sodium salt of ß-1,4-linked units of ß-1,3-linked D-glucuronic acid and N-acetyl-D-glucosamine), a model polysaccharide in the present work. The amount of non-freezing water, i.e. water in close proximity of HYA chain which does not freeze et all, was determined around 0.74gH2O/gHYA for HYA with molecular weight from 100 to 740kDa and 0.84gH2O/gHYA for molecular weight of 1390kDa. The amount of freezing-bound water, the water pool which is affected by presence of HYA but freezes, was determined in the range from 0.74 to 2gH2O/gHYA. Above this value only non-freezing and bulk water are present since melting enthalpy measured above this concentration reached the same value as for pure water. Since this approach suffers from several experimental problems, a new approach, based on the evaporation enthalpy determination, was suggested. The analysis of the evaporation enthalpies revealed an additional process associated with apparent energy release taking part below the water content of 0.34gH2O/gHYA. Existence of this phenomenon was observed also for protonated form of HYA. The existence of energy compensating process was confirmed with the Kissinger-Akahira-Sunose method which allowed determination of actual water evaporation/desorption enthalpies in all stages of the evaporation process. In fact, the apparent evaporation enthalpy value increased until water content of 0.34gH2O/gHYA, and then dropped down to lower values which were, still higher than the value of the pure water evaporation enthalpy. By the use of time domain nuclear magnetic resonance (TD-NMR) technique it was revealed that this phenomenon is the plasticisation of HYA.
Further, it was revealed that the non-freezing water determined by the use of DSC consists of two water fractions, i.e. 15% of water structurally integrated, interacting directly with polar sites, and 85% of water structurally restricted, embedded in-between the HYA chains. The occurrence of plasticisation concentration close to equilibrium moisture content provided the possibility to influence the HYA physical structure during the drying. In this way three samples of native HYA, dried under various conditions were prepared and their physical properties were analyzed. The samples differed in kinetics of rehydration, plasticisation concentration, glass transitions, and morphology. The properties of water pool were studied in solutions of 10"25mg HYA/mL as well. The fast filed cycling (FFC) NMR relaxometry showed the existence of three water fractions which correlation times spanned from 10"6 to 10"10 seconds, progressively decreasing in dependency on its distance from HYA chain. The formation of a weak and transient intramolecular water bridge between HYA chains was observed. It was shown that, unlike the inorganic electrolytes, polyelectrolytes hydration is a dynamic process which reflects not only the technique used for the analysis, experimental conditions but also the conformation of the polysaccharide and its "thermal" and "hydration" history.
It was demonstrated that some native polysaccharide structures can be easily modified by manipulation of preparation conditions, giving fractions with specific physicochemical properties without necessity of any chemical modification.
The estimation of the potential risk of pesticide entries into streams - and therefore the potential risk for the ecosystems - is an important requirement for the planning of risk mitigation strategies. Especially on the landscape level the required event triggered sampling methods are conjuncted with considerable efforts with regard to input data, time and personnel. To circumvent these problems simulation models form a reasonable alternative. The aims of this work were (A) the development of a simulation tool for the estimation of pesticide entries into surface waters on the landscape level, and (B) the application of the simulator for an exposure- and risk-assessment as well as the assessment of negative effects of pesticides on aquatic communities. Section 1 - Exposure-, Risk- and Effects In sections 1.1 and 1.2 the simulation model was applied to a multitude of small and medium sized streams in an agricultural impacted study area around the city of Braunschweig, Germany. Section 1.3 gives an overview of the simulators field of application and the general system structure. Section 1.1 - Scenario based simulation of runoff-related pesticide entries into small streams on a landscape level (English publication, p. 27): In this paper we present a simulation tool for the simulation of pesticide entry from arable land into adjacent streams. We used the ratio of exposure to toxicity (REXTOX) model proposed by the OECD which was extended to calculate pesticide concentrations in adjacent streams. We simulated the pesticide entry on the landscape level at 737 sites in small streams situated in the central lowland of Germany. The most significant model parameters were the width of the no-application-zone and the degree of plant-interception. The simulation was carried out using eight different environmental scenarios, covering variation of the width of the no-application-zone, climate and seasonal scenarios. The highest in-stream concentrations were predicted at a scenario using no (0 m) buffer zone in conjunction with increased precipitation. According to the predicted concentrations, the risk for the aquatic communities was estimated based on standard toxicity tests and the application of a safety factor. Section 1.2 - Linking land use variables and invertebrate taxon richness in small and medium-sized agricultural streams on a landscape level (English publication, p. 50): In this study the average numbers of invertebrate species across an arable landscape in central Germany (surveys from 15 years in 90 streams at 202 sites) were assessed for their correlation with environmental factors such as stream width, land use (arable land, forest, pasture, settlement), soil type and agricultural derived stressors. The stress originating from arable land was estimated by the factor "risk of runoff", which was derived from a runoff-model (rainfall induced surface runoff). Multivariate analysis explained 39.9% of the variance in species number, revealing stream width as the most important factor (25.3%) followed by risk of runoff (9.7%). Section 1.3 - Informationssystem zur ökotoxikologischen Bewertung der Gewässergüte in Bezug auf Pflanzenschutzmitteleinträge aus der Landwirtschaft - Systemaufbau und Anwendungsmöglichkeiten (German publication, p. 61): Section 1.3 contains a short overview of the simulation tool, the field of application and some examples of use, covering the effects of the width of the buffer zone as well as the creation of risk maps on the landscape level. Section 2 - The simulation tool An important aspect for the employment of a simulation model in the context of risk assessment is the applicability in practice: the accessibility of the needed input data, the conversion of the mathematical model into a software application that can be run on any current personnel computer and also an appropriate end-user documentation of the system. Section 1.4 - Informationssystem zur ökotoxikologischen Bewertung der Gewässergüte in Bezug auf Pflanzenschutzmitteleinträge aus der Landwirtschaft - Simulationsmodell und Systemaufbau (German report, p. 67): In this section a general overview of the simulation model as well as the schematic system structure given. Section 1.5 - Benutzerhandbuch (German report, p. 71): The user manual contains details concerning the installation of the system, generation of the required input data and the general use of the system. Moreover it presents some application examples (what-if analyses). Section 1.6 - Technical documentation (German report, p. 104): The technical documentation describes internal structures and processes of the simulation system. Section 1.6 provides information regarding the required structure of input/output tables.
Die Vermeidung von Lebensmittelabfällen als nicht-technische Strategie zur Umsetzung der Bioökonomie
(2018)
Das Konzept der Bioökonomie beruht auf der Vision einer Wirtschaft, die durch die bevorzugte Verwendung biogener Rohstoffe unabhängiger wird von der Nutzung fossiler Quellen und gleichzeitig einen Beitrag zu Klima- und Ressourcenschutz, Ernährungssicherung und Stärkung der heimischen Wirtschaft leisten kann. Da die land- und forstwirtschaftliche Bio-masseproduktion aufgrund knapper Flächen jedoch begrenzt ist und sich bereits heute die negativen Folgen einer verstärkten Nachfrage zeigen, wird bezweifelt, dass sich die Vision in nachhaltiger Weise realisieren lässt. Offizielle Bioökonomie-Strategien setzen auf einen Technik-basierten Umsetzungspfad, in der Hoffnung, mit Hilfe technischer Innovationen Biomasseproduktion und Umweltverbrauch zu entkoppeln. Kritiker aus Wissenschaft und Zivilgesellschaft stehen diesem Weg skeptisch gegenüber. Sie befürchten, dass Effizienzsteigerungen und die Entwicklung neuer, umweltverträglicher Konversionsprozesse nicht ausreichen werden, um potentiell negative Folgen einer verstärkten Biomassenutzung abzuwenden. Angesichts der natürlichen Grenzen der Biosphäre sehen sie vor allem nicht-technische Ansätze zur Veränderung von Produktions- und Konsummustern als unverzichtbare Voraus-setzungen an. Mit der Formulierung eines sozial-ökologischen Umsetzungspfads wird eine Modifizierung des Bioökonomie-Konzepts gefordert, von einem bloßen Wandel der Ressourcenbasis hin zu einer umfassenden gesellschaftlichen Transformation, mit dem Ziel, Ressourcenverbrauch und Rohstoffproduktion neu zu justieren.
Die Arbeit stellt anhand des Beispiels der Lebensmittelabfälle die Bedeutung nicht-technischer Ansätze für die Realisierung der Bioökonomie heraus. Die Basis bilden fünf Publikationen, von denen sich drei mit dem Aufkommen von Lebensmittelabfällen, den Ursachen ihrer Entstehung und möglichen Vermeidungsstrategien befassen. Die anderen beiden Veröffentlichungen behandeln Flächenkonkurrenzen in der Landwirtschaft sowie Implementierungspfade der Bioökonomie. Die Arbeit kommt zu dem Schluss, dass der Beitrag von Lebensmittelabfällen zur Bioökonomie auf zwei Weisen denkbar ist: Entweder können diese als Ausgangsstoff für die Biogasproduktion oder die Bioraffinerie genutzt werden, was der aktuell vorherrschenden Vorstellung entspricht. Oder es können durch eine Reduktion des Abfallaufkommens Ressourcen, die bisher in die Bereitstellung nicht konsumierter Lebensmittel flossen, für andere Biomassenutzungen freigesetzt werden.
Die Analyse des Abfallaufkommens und der damit verbundenen Umweltwirkungen, aber auch vorhandene Studien über die ökologischen Wirkungen von Abfallvermeidungs- und verwertungsoptionen zeigen, dass die Vermeidung unter dem Gesichtspunkt der Ressourceneffizienz die sinnvollere Option darstellt. Die Arbeit hebt das Potenzial hervor, das sich aus der Berücksichtigung einer Reduktion von Lebensmittelabfällen für die Bioökonomie ergeben könnte. So ist denkbar, dass durch einen effizienteren Umgang mit den bereits produzierten Nahrungsmitteln Ressourcen freigesetzt werden können, die den Spielraum für die Realisierung der Bioökonomie verbessern würden oder aber Perspektiven entstehen für alternative Formen des Landbaus, die eine umweltverträglichere Biomasseproduktion ermöglichen könnten. Da nicht-technische Ansätze in der aktuellen Bioökonomie-Debatte kaum Berücksichtigung finden, besteht Bedarf, diese in das politische Konzept der Bioökonomie einzubeziehen und den wissenschaftlichen Diskurs für diese Aspekte zu öffnen.
Mathematical Modelling of GIS Tailored GUI Design with the Application of Spatial Fuzzy Logic
(2014)
This PhD thesis is situated within the framework of the Research-Group Learning and Neurosciences (ReGLaN)-Health and Logistics project. The goal of this project is the optimisation of health service delivery in the rural areas of South Africa. Cooperation takes place between ReGLaN-Health and Logistics and the South African Council for Scientific and Industrial Research (CSIR) Meraka Institute, with Prof Dr Dr Marlien Herselman of Pretoria, South Africa, as the central contact person. This thesis deals with the mathematical modelling of Geographic Information System (GIS)-tailoredrnGraphical User Interface (GUI) design with the application of spatial fuzzy logic. This thesis considers the mathematical visualisation of risk and resource maps for epidemiological issues using GIS and adaptive GUI design for an Open Source (OS) application for digital devices. The intention ofrnthis thesis is to provide spatial decision support tailored to different user groups. In order for the GUI elements to be evaluated and initialised, empirical teaching-learning-research on dealing with geomedia and GUI elements was conducted.
Internationale Bildungsstudien (TIMSS und PISA) offenbarten, dass es deutschen Schülern nur begrenzt gelingt, ihr erworbenes Wissen im Physikunterricht zur Problemlösung in neuen Kontexten zu nutzen. Als Grund nennen die Studien die gering ausgeprägte Kompetenz-erwartung in Bezug zum Fach Physik. Die Folge ist eine geringe Motivation der Lernenden, physikalische Aufgaben zu lösen. Studien zeigen aber auch, dass die Motivation beim Lernen durch den Einsatz digitaler Lernmedien gesteigert werden konnte. Aus diesem Grund wird in dieser Arbeit untersucht, ob das Vertrauen in die eigenen Fähigkeiten durch das Lernen in einer integrierten Lernumgebung gefördert werden kann. Im Rahmen eines Design-Based-Research-Forschungsansatzes (DBR) wurde eine integrierte Lernumgebung „Wärmelehre“ mit digitalen Lernmedien für den Physikunterricht gestaltet, die dann in zwei Schulformen (IGS und Gymnasium) innerhalb einer quasi-experimentellen Feldstudie erprobt wurde. Im 1. Zyklus des DBR wurden die Wirkungen des selbstständigen Lernens mit digitalen/analogen Medien in Einzelarbeit untersucht. Die Ergebnisse der Wissenstests zeigen einen höheren Lernerfolg bei den Lernenden der Experimentalgruppen, der sich aber nicht signifikant von den Lernenden der Kontrollgruppen (analoge Medien) unterscheidet. Die Lernenden konnten sich in der integrierten Lernumgebung mit Unterstützung beider Medienformate selbstständig Fachwissen aneignen und problembasierte Textaufgaben lösen. Die Ergebnisse der Befragungen der Lernenden zeigen, dass sich die Lerngruppen signifikant in ihrem erlebten Grad der Selbststeuerung unterscheiden. Die Lernenden beider Experimentalgruppen bewerten ihren Handlungsspielraum besser als die Lernenden der beiden Kontrollgruppen. Ebenfalls konnte festgestellt werden, dass sich die individuellen Lernvoraussetzungen, der Lernstiltyp, das Kompetenzerleben und die Aspekte der Medien-gestaltung wechselseitig beeinflussen und auf den Lernerfolg wirken. Die Ergebnisse der Lernstilanalyse zeigen, dass sich selbst kleine Lerngruppen heterogen zusammensetzen. Demnach scheint es für einen guten Lernerfolg notwendig zu sein, dass die Lehrenden, die Lernumgebung an die individuellen Lernpräferenzen der Lernenden der Lerngruppe anpassen. Aus den Ergebnissen lässt sich als Konsequenz für den Physikunterricht ableiten, dass Selbstlernphasen mit digitalen Lernmedien regelmäßig in den Unterricht integriert werden sollten, um die Problemlöse- und die Selbststeuerungskompetenz zu fördern. Es ist von Vorteil, wenn die Lehrenden für die Gestaltung einer Lernumgebung, das Vorwissen, die individuellen Lernvoraussetzungen und die Zusammensetzung der Lerngruppe (Lernstiltyp) als Qualitätsdimensionen erfassen. Im Re-Design werden Vorschläge unterbreitet, wie die integrierte Lernumgebung lernstilgerecht weiterentwickelt werden kann. Im 2. Zyklus soll dann erforscht werden, ob sich Unterschiede im Lernerfolg und in den untersuchten Aspekten zeigen, wenn die Lernenden in Einzelarbeit, in Partnerarbeit oder in ihrer Lernstilgruppe selbstgesteuert lernen, um die Lernumgebung zyklisch weiterzuentwickeln.
Engineered nanoparticles are emerging pollutants. Their increasing use in commercial products suggests a similar increase of their concentrations in the environment. Studying the fate of engineered colloids in the environment is highly challenging due to the complexity of their possible interactions with the main actors present in aquatic systems. Solution chemistry is one of the most central aspects. In particular, the interactions with dissolved organic matter (DOM) and with natural colloids are still weakly understood.
The aim of this work was to further develop the dedicated analytical methods required for investigating the fate of engineered colloids in environmental media as influenced by DOM. Reviewing the literature on DOM interactions with inorganic colloids revealed that a systematic characterization of both colloids and DOM, although essential, lacks in most studies and that further investigations on the fractionation of DOM on the surface of engineered colloids is needed. Another knowledge gap concerns the effects of DOM on the dynamic structure of colloid agglomerates. For this question, analytical techniques dedicated to the characterization of agglomerates in environmental media at low concentrations are required. Such techniques should remain accurate at low concentrations, be specific, widely matrix independent and free of artefact due to sample preparation. Unfortunately, none of the currently available techniques (microscopy, light scattering based methods, separation techniques etc.) fulfills these requirements.
However, a compromise was found with hydrodynamic chromatography coupled to inductively coupled plasma mass spectrometry (HDC-ICP-MS). This method has the potential to size inorganic particles in complex media in concentration ranges below ppb and is element specific; however, its limitations were not systematically explored. In this work, the potential of this method has been further explored. The simple size separation mechanism ensures a high flexibility of the elution parameters and universal calibration can be accurately applied to particles of different compositions and surface chemistries. The most important limitations of the method are its low size resolution and the effect of the particle shape on the retention factor. The implementation of HDC coupled to single particle ICP-MS (HDC-SP-ICP-MS) offers new possibilities for the recognition of particle shape and hence the differentiation between primary particles and homoagglomerates. Therefore, this coupling technique is highly attractive for monitoring the effects of DOM on the stability of colloids in complex media. The versatility of HDC ICP MS is demonstrated by its successful applications to diverse samples. In particular, it has been used to investigate the stability of citrate stabilized silver colloids in reconstituted natural water in the presence of different types of natural organic matter. These particles were stable for at least one hour independently of the type of DOM used and the pH, in accordance with a coauthored publication addressing the stability of silver colloids in the River Rhine. Direct monitoring of DOM adsorption on colloids was not possible using UV and fluorescence detectors. Preliminary attempts to investigate the adsorption mechanism of humic acids on silver colloids using fluorescence spectroscopy suggest that fluorescent molecules are not adsorbed on silver particles. Several solutions for overcoming the encountered difficulties in the analysis of DOM interactions are proposed and the numerous perspectives offered by further developments and applications of HDC-(SP)-ICP-MS in environmental sciences are discussed in detail.
Natural pest control and pollination are important ecosystem services for agriculture. They can be supported by organic farming and by seminatural habitats at the local and landscape scale.
The potential of seminatural habitats to support predatory flies (chapters 2 and 3) and bees(chapter 7) at the local and landscape scale was investigated in seminatural habitats. Predatory flies were more abundant in woody habitats and positively related to landscape complexity. The diversity and the abundance of honey and wild bees were positively related to the supply of flowers offered in the seminatural habitats.
The influence of organic farming, adjacent seminatural habitats and landscape complexity on pest control (chapter 4) and pollination (chapter 6) was investigated in 18 pumpkin fields. Organic farming lacked strong effects both on the pest control and on the pollination of pumpkin.
Pest control is best supported at the local scale by the flower abundance in the adjacent habitat. The flower supply positively affected the density of natural enemies and tended to reduce aphid densities in pumpkin fields.
Pumpkin provides a striking example for a dominant role of wild pollinators for pollination success, because bumble bees are the key pollinators of pumpkin in Germany, despite a higher visitation frequency of honey bees. Pollination is best supported by landscape complexity. Bumble bee visits and as a result pollen delivery in pumpkin were negatively related to the dominance of agricultural land in the surrounding landscape.
The influence of aphid density (chapter 8) and pollination (chapter 5) on pumpkin yield was evaluated. Pumpkin yields were not affected by aphid densities observed in the pumpkin fields and not limited by pollination at the current levels of bee visitation.
In conclusion, especially seminatural habitats, that provide diverse, continuous floral resources, are important for natural enemies and pollinators. A sufficient proportion of different seminatural habitat types in agricultural landscapes should be maintained and restored. Thereby natural enemies such as predatory flies, wild pollinators such as bumble bees, and the pest control and pollination provided by them can be supported.
Grapevine growers have struggled with defending their crops against pests and diseases since the domestication of grapevine over 6000 ears ago. Since then, new growing methods paired with a better nderstanding of the ecological processes in the vineyard ecosystem continue to improve quality and quantity of grape harvests. In this thesis I am describing the effects of two recent innovations in viticulture on pest and beneficial arthropods in vineyards; Fungus-resistant grapevine cultivars (PIWIs) and the pruning system semi-minimal pruned hedge (SMPH). The SMPH pruning system allows for a drastic reduction of manual labor in the vineyard, and PIWIs are resistant to two of the most common fungal diseases of grapevine and therefore allow a drastic reduction of fungicide applications compared to conventional varieties. Heavy use of pesticides is linked to a number of problems, including pollution of waterways, negative effects on human health, and biodiversity loss. Here, I studied the effects of fungicide reduction and minimal pruning on arthropods that are beneficial for natural pest suppression in the vineyard ecosystem such as predatory mites, spiders, ants, earwigs, and lacewings. All of these groups either benefitted from the reduction of fungicide sprayings or were not significantly affected. Structural changes in the canopy of SMPH grapevines altered the microclimate in the canopy which in turn influenced some of the arthropods living in it. Overall, my findings suggest that PIWIs and SMPH, both in combination or separately, improve conditions for natural pest control. This adds to other advantages of these innovative management practices such as a reduction in production cost and a smaller impact on the environment.
The (un-)controlled application of olive oil mill wastewater (OMW) has positive and negative effects on soil quality. On the one hand it can be used as fertilizer, on the other hand especially the occurrence of soil water repellency is problematic. Due to this fact the objective of this study was to characterize the effects of OMW application on soil and to investigate the mechanisms that are in combination with changes of soil organic matter quality responsible for soil water repellency depending on the climatic conditions.
At first several locations of uncontrolled OMW disposal were screened for positive and negative im-pacts. Then, laboratory incubation experiments and finally a field experiment in Israel were conducted in order to determine the influence of climatic conditions. Besides standard soil parameters (pH, elec-tric conductivity, total carbon, dissolved organic carbon , specific UV-Absorption) it was focused on the determination of phenolic compounds, the carbon isotope ratio, the water drop penetration time and the contact angle as well as the thermal analysis.
This thesis shows that soil water repellency of OMW-polluted soils depends on the climatic conditions, i.e. the application season. In the laboratory as well as in the field the wettability of the soil was strongly reduced under hot and dry conditions. It was observed, that the stable carbon fraction characterized by a high calorific value is responsible for soil water repellency. In particular, amphiphilic substances, e.g. fatty acids, may interact with soil particles as a consequence of drying. On the contrary, no reduc-tion of the wettability of the soil was determined under moist conditions and degradation of organic matter of the OMW was enhanced. Nevertheless, too strong irrigation or rainfall, e.g. in winter, may leach phenolic ingredients of the OMW into the groundwater.
At the same time the application led to an increase of organic and inorganic nutrients, which should be emphasized as a positive effect. Due to these results, a controlled application of olive oil mill wastewater as alternative, low-cost and sustainable treatment option is recommended. But, instead of the current application season winter, the olive mill wastewater should be stored and not be spread before spring in order to avoid negative impacts on the soil.