Refine
Year of publication
- 2015 (18) (remove)
Document Type
- Master's Thesis (18) (remove)
Has Fulltext
- yes (18) (remove)
Keywords
- 360 Grad (1)
- 360 degree (1)
- API analysis (1)
- API-Analyse (1)
- Adhäsion (1)
- Augmented Reality (1)
- Ausrichtungswerkzeug (1)
- Austenitischer Stahl (1)
- Bakterien (1)
- Biofilm (1)
Institute
Politische und gesellschaftliche Polarisierung ist ein interessantes Phänomen, über dessen Auswirkungen viele unterschiedliche, zum Teil auch gegensätzliche, Theorien existieren.
Polarisierung wird in der Literatur mit unterschiedlichen Methoden gemessen. Die vorliegende Arbeit gibt einen Überblick über existierende Polarisierungsmaße und es werden zwei neuartige Maße aus dem Gebiet der spektralen Graphentheorie vorgestellt. Anschließend werden die bekannten und die neu entwickelten Maße auf den LiquidFeedback-Datensatz der Piratenpartei Deutschland angewandt. Als Ergebnis lässt sich festhalten, dass die Maße teilweise zu unterschiedlichen Ergebnisse kommen. Dies liegt darin begründet, dass nicht alle Maße das Gleiche messen. Um zu verstehen was die einzelnen Maße aussagen, werden wesentliche Eigenschaften von Polarisierungsmaßen herausgearbeitet und es wird für jedes Maß dargelegt, welche Eigenschaften es erfüllt. Die angesprochenen Polarisierungsmaße beziehen sich auf die Entwicklung der Polarisierung zwischen Usern des LiquidFeedback-Systems. Bei der Betrachtung von einzelnen Personen und Abstimmungen fiel unter anderem auf, dass polarisierende Personen mehr Macht durch
Delegationen besitzen als die restlichen Personen und dass polarisierte Vorschläge circa doppelt so häufig umgesetzt werden.
In this thesis, we deal with the question if challenge, flow and fun in computer games are related to each other, and which influence the motivational, psychological components motivation of success, motivation of failure and the chance of success do have. In addition, we want to know if a free choice in the level of difficulty is the optimal way to flow. To examine these theories, a study based on an online survey was executed, in which the participants played the game “flOw“. The results were evaluated with the help of a two-factorial analysis of variance with repeated measurement and tests on correlation. Thereby we found out that there actually exists a relation between challenge, flow and fun and that motivation does matter indirectly.
Heat exchangers are used for thickening of various products or desalination of saltwater. Nevertheless, they are used as cooling unit in industries. Thereby, the stainless steel heat transferring elements get in contact with microorganism containing media, such as river water or saltwater, and corrode. After at least two years of utilization the material is covered with bacterial slime called biofilm. This process is called biofouling and causes loss in efficiency and creates huge costs depending on cleaning technique and efficiency. Cleaning a heat exchanger is very expensive and time consuming. It only can be done while the device is out of business.
Changing the surface properties of materials is the best and easiest way to lengthen the initial phase of biofilm formation. This leads to less biofouling (Mogha et al. 2014).
Thin polymer films as novel materials have less costs in production than stainless steel and are easy to handle. Furthermore, they can be functionalzed easily and can be bougth in different sizes all over the world. Because of this, they can reduce the costs of cleaning techniques and lead to a longer high efficiency state of the heat exchanger. If the efficiency of the heat exchanger decreases, the thin polymer films can be replaced.
For a successful investigation of the microbial and the process engineering challenges a cooperation of Technical University of Kaiserslautern (chair of seperation science and technology) and University of Koblenz-Landau (working goup microbiology) was established.
The aim of this work was design engineering and production of a reactor for investigation of biofouling taking place on thin polymeric films and stainless steel. Furthermore, an experimental design has to be established. Several requirements have to be applied for these tasks. Therefore, a real heat exchanger is downscaled, so the process parameters are at least comparable. There are many commercial flow cell kits available. Reducing the costs by selfassembling increased the number of samples, so there is a basis for statistic analysis. In addition, fast and minimal invasive online-in-situ microscopy and Raman spectroscopy can be performed. By creating laminary flow and using a weir we implemented homogenous inflow to the reactors. Reproduceable data on biomass and cell number were created.
The assessment of biomass and cell number is well established for drinking water analysis. Epifluorescense microscopy and gravimetric determination are the basic techniques for this work, too. Differences in cell number and biomass between surface modifications and materials are quantified and statistically analysed.
The wildtype strain Escherichia coli K12 and an inoculum of 500 ml fresh water were used to describe the biofouling of the films. Thereby, we generated data with natural bacterial community in unknown media properties and data with well known media properties, so the technical relevance of the data is given.
Free surface energy and surface roughness are the first attachment hurdles for bacteria. These parameters were measured according to DIN 55660 and DIN EN ISO 4287. The materials science data were correlated with the number of cells and the biomass. This correlation acts as basal link of biofouling as biological induced parameter to the material properties. Material properties for reducing the biofouling can be prospected.
By using Raman spectroscopy as a cutting edge method future investigations could be shortened. If biomass or cell number can be linked with the spectra, new functional materials can be investigated in a short time.
The mitral valve is one of the four valves in the human heart. It is located in the left heart chamber and its function is to control the blood flow from the left atrium to the left ventricle. Pathologies can lead to malfunctions of the valve so that blood can flow back to the atrium. Patients with a faulty mitral valve function may suffer from fatigue and chest pain. The functionality can be surgically restored, which is often a long and exhaustive intervention. Thorough planning is necessary to ensure a safe and effective surgery. This can be supported by creating pre-operative segmentations of the mitral valve. A post-operative analysis can determine the success of an intervention. This work will combine existing and new ideas to propose a new approach to (semi-)automatically create such valve models. The manual part can guarantee a high quality model and reliability, whereas the automatic part contributes to saving valuable labour time.
The main contributions of the automatic algorithm are an estimated semantic separation of the two leaflets of the mitral valve and an optimization process that is capable of finding a coaptation-line and -area between the leaflets. The segmentation method can perform a fully automatic segmentation of the mitral leaflets if the annulus ring is already given. The intermediate steps of this process will be integrated into a manual segmentation method so a user can guide the whole procedure. The quality of the valve models generated by the method proposed in this work will be measured by comparing them to completely manually segmented models. This will show that commonly used methods to measure the quality of a segmentation are too general and do not suffice to reflect the real quality of a model. Consequently the work at hand will introduce a set of measurements that can qualify a mitral valve segmentation in more detail and with respect to anatomical landmarks. Besides the intra-operative support for a surgeon, a segmented mitral valve provides additional benefits. The ability to patient-specifically obtain and objectively describe the valve anatomy may be the base for future medical research in this field and automation allows to process large data sets with reduced expert dependency. Further, simulation methods that use the segmented models as input may predict the outcome of a surgery.
Web application testing is an active research area. Garousi et al. did a systematic mapping study and classified 79 papers published between 2000-2011. However, there seems to be a lack of information exchange between the scientific community and tool developers.
This thesis systematically analyzes the field of functional, system level web application testing tools. 194 candidate tools were collected in the tool search and screened, with 23 tools being selected as foundation of this thesis. These 23 tools were systematically used to generate a feature model of the domain. The methodology to support this is an additional contribution of this thesis. It processes end user documentation of tools belonging to an examined domain and creates a feature model. The feature model gives an overview over the existing features, their alternatives and their distribution. It can be used to identify trends and problems, extraordinary features, help decision making of tool purchase or guide scientists how to focus research.
One task of executives and project managers in IT companies or departments is to hire suitable developers and to assign them to suitable problems. In this paper, we propose a new technique that directly leverages previous work experience of developers in a systematic manner. Existing evidence for developer expertise based on the version history of existing projects is analyzed. More specifically, we analyze the commits to a repository in terms of affected API usage. On these grounds, we associate APIs with developers and thus we assess API experience of developers. In transitive closure, we also assess programming domain experience.
Geographic cluster based routing in ad-hoc wireless sensor networks is a current field of research. Various algorithms to route in wireless ad-hoc networks based on position information already exist. Among them algorithms that use the traditional beaconing approach as well as algorithms that work beaconless (no information about the environment is required besides the own position and the destination). Geographic cluster based routing with guaranteed message delivery can be carried out on overlay graphs as well. Until now the required planar overlay graphs are not being constructed reactively.
This thesis proposes a reactive algorithm, the Beaconless Cluster Based Planarization (BCBP) algorithm, which constructs a planar overlay graph and noticeably reduces the number of messages required for that. Based on an algorithm for cluster based planarization it beaconlessly constructs a planar overlay graph in an unit disk graph (UDG). An UDG is a model for a wireless network in which every participant has the same sending radius. Evaluation of the algorithm shows it to be more efficient than the non beaconless variant. Another result of this thesis is the Beaconless LLRAP (BLLRAP) algorithm, for which planarity but not continued connectivity could be proven.
This thesis conducts a text and network analysis of criminological files. The specific focus during the research is the field money laundering. The analysis showed the most important concepts present in the text which were classified in eleven different classes. The relationships of those concepts were analysed using ego networks, key entity identification and clustering. Some of the statements given about money laundering could be validated by the findings of this analysis and their interpretation. Specific concepts like banks and organizations as well as foreign subsidiaries were identified. Aggregating these concepts with the statements in chapter 1.4.3 on the circular process of money laundering it can be stated that different organizations and individuals, present in the criminological files, were placing money through different banks, organizations and investments in the legal financial market. At last this thesis tries to validate the benefits of the used tools for the kind of conducted research process. An estimation on ORA's and Automap's applicability for this kind of research is given in the end.
In this work a framework is developed that is used to create an evaluation scheme for the evaluation of text processing tools. The evaluation scheme is developed using a model-dependent software evaluation approach and the focus of the model-dependent part is the text-processing process which is derived from the Conceptual Analysis Process developed in the GLODERS project. As input data a German court document is used containing two incidents of extortion racketeering which happened in 2011 and 2012. The evaluation of six different tools shows that one tool offers great results for the given dataset when it is compared to manual results. It is able to identify and visualize relations between concepts without any additional manual work. Other tools also offer good results with minor drawbacks. The biggest drawback for some tools is the unavailability of models for the German language. They can perform automated tasks only on English documents. Nonetheless some tools can be enhanced by self-written code which allows users with development experience to apply additional methods.
In current research of the autonomous mobile robots, path planning is still a very important issue.
This master's thesis deals with various path planning algorithms for the navigation of such mobile systems. This is not only to determine a collision-free trajectory from one point to another. The path should still be optimal and comply with all vehicle-given constraints. Especially the autonomous driving in an unknown and dynamic environment poses a major challenge, because a closed-loop control is necessary and thus a certain dynamic of the planner is demanded.
In this paper, two types of algorithms are presented. First, the path planner, based on A*, which is a common graph search algorithm: A*, Anytime Repairing A*, Lifelong Planning A*, D* Lite, Field D*, hybrid A*. Second, the algorithms which are based on the probabilistic planning algorithm Rapidly-exploring Random Tree (Rapidly-exploring Random Tree, RRT*, Lifelong Planning RRT*), as well as some extensions and heuristics. In addition, methods for collision avoidance and path smoothing are presented. Finally, these different algorithms are evaluated and compared with each other.