Refine
Year of publication
Document Type
- Doctoral Thesis (22) (remove)
Keywords
- Aluminiumorthophosphat (1)
- Arzneimittel (1)
- Bauxit (1)
- Biotransformation (1)
- Bororthophosphat (1)
- Cloud Point Extraction (1)
- Depth Profile (1)
- Ecotoxicity (1)
- Environmental organic chemistry (1)
- Environmental samples (1)
Institute
- Institut für Integrierte Naturwissenschaften, Abt. Chemie (22) (remove)
Bauxite is, among other raw materials, an important material for the production of refractories. However, the availability of refractory raw material grades is limited worldwide. As high iron contents have a negative influence on the temperature resistance of the refractory material produced, a maximum iron oxide content of 2 wt.-% in the bauxite is acceptable. This means that only native raw materials from a few deposits can be used. In order to counteract the problem of too high iron oxide contents in natural bauxites, the possibility of processing bauxite for the refractory industry by using an acid leaching process was to be investigated within the scope of this work. In previous studies on this topic, some investigations on iron leaching have already been carried out on individual bauxites. However, the resulting bauxite composition was mostly neglected in its entirety and only the influences of individual leaching parameters on the leaching result were investigated independently. Moreover, the results and procedures generated are not generally valid and cannot be transferred to bauxites of other chemical or mineralogical compositions.
In order to clarify the open questions in the processing of natural bauxites, leaching tests with hydrochloric acid were carried out on five different bauxites within this work. By using computerized statistical design of experiments, an individual model was generated for each bauxite to predict the optimal factor settings. The factors investigated were acid concentration, solid-acid ratio, leaching temperature, leaching time and grain fraction. The general planning method for bauxite processing developed in this context contains all necessary factors, useful factor settings and the effects to be considered during planning and evaluation. It could be shown that, based on this planning method, a significant, individual model can be created for each of the bauxites investigated, which predicts the optimal leaching settings for the corresponding bauxite. Furthermore, it was found that the transfer of an already created model to another bauxite of similar composition is possible. Based on the results obtained from the leaching tests and model fittings, in combination with further results on the structural analysis of the bauxites, insights into the leachability of various aluminium and iron minerals from bauxite could be gained.
To develop a sustainable acid leaching process, the possibility of regenerating the contaminated acid produced was also tested as an example. It was shown that liquid-liquid extraction can extract more than 99 % of the iron present in the solution and that the regenerated acid can then be reused for the leaching process.
Thousands of chemicals from daily use are being discharged from civilization into the water cycle via different pathways. Ingredients of personal care products, detergents, pharmaceuticals, pesticides, and industrial chemicals thus find their way into the aquatic ecosystems and may cause adverse impacts on the ecology. Pharmaceuticals for instance, represent a central group of anthropogenic chemicals, because of their designed potency to interfere with physiological functions in organisms. Ecotoxicological effects from pharmaceutical burden have been verified in the past. Therapeutic groups with pronounced endocrine disrupting potentials such as steroid hormones gain increasing focus in environmental research as it was reported that they cause endocrine disruption in aquatic organisms even when exposed to environmentally relevant concentrations. This thesis considers the comprehensive investigation of the occurrence of corticosteroids and progestogens in wastewater treatment plant (WWTP) effluents and surface waters as well as the elucidation of the fate and biodegradability of these steroid families during activated sludge treatment. For the first goal of the thesis, a robust and highly sensitive analytical method based on liquid chromatography-tandem mass spectrometry (LC-MS/MS) was developed in order to simultaneously determine the occurrence of around 60 mineralocorticoids, glucocorticoids and progestogens in the aquatic environment. A special focus was set to the compound selection due to the diversity of marketed synthetic steroids. Some analytical challenges have been approved by individual approaches regarding sensitivity enhancement and compound stabilities. These results may be important for further research in environmental analysis of steroid hormones. Reliable and low quantification limits are the perquisite for the determination of corticosteroids and progestogens at relevant concentrations due to low consumption volumes and simultaneously low effect-based trigger values. Achieved quantification limits for all target analytes ranged between 0.02 ng/L and 0.5 ng/L in surface water and 0.05 ng/L to 5 ng/L in WWTP effluents. This sensitivity enabled the detection of three mineralocorticoids, 23 glucocorticoids and 10 progestogens within the sampling campaign around Germany. Many of them were detected for the first time in the environment, particularly in Germany and the EU. To the best of our knowledge, this in-depth steroid screening provided a good overview of single steroid burden and allowed for the identification of predominantly steroids of each steroid
type analyzed for the first time. The frequent detection of highly potent synthetic steroids (e.g. triamcinolone acetonide, clobetasol propionate, betamethasone valerate, dienogest, cyproterone acetate) highlighted insufficient removal during conventional Summary wastewater treatment and indicated the need for regulation to control their emission since the steroid concentrations were found to be above the reported effect-based trigger values for biota. Overall, the study revealed reliable environmental data of poorly or even not analyzed steroids. The results complement the existing knowledge in this field but also providednew information which can beused particularly for compound prioritization in ecotoxicological research and environmental analysis. Based on the data obtained from the monitoring campaign, incubation experiments were conducted to enable the comparison of the biodegradability and transformation processes in activated sludge treatment for structure-related steroids under aerobic and standardized experimental conditions. The compounds were accurately selected to cover manifold structural moieties of commonly used glucocorticoids, including non-halogenated and halogenated steroids, their mono- and diesters, and several acetonide-type steroids. This approach allowed for a structure-based interpretation of the results. The obtained biodegradation rate constants suggested large variations in the biodegradability (half-lifes ranged from < 0.5 h to > 14 d). An increasing stability was identified in the order from non-halogenated steroids (e.g. hydrocortisone), over 9α-halogenated steroids (e.g. betamethasone), to C17-monoesters (e.g. betamethasone 17-valerate, clobetasol propionate), and finally to acetonides (e.g. triamcinolone acetonide), thus suggesting a strong relationship of the biodegradability with the glucocorticoid structure. Some explanations for this behavior have been received by identifying the transformation products (TPs) and elucidating individual transformation pathways. The results revealed the identification of the likelihood of transformation reactions depending on the chemical steroid structure for the first time. Among the identified TPs, the carboxylates (e.g. TPs of fluticasone propionate, triamcinolone acetonide) have been shown persistency in the subsequent incubation experiments. The newly identified TPs furthermore were frequently detected in the effluents of full-scale wastewater treatment plants. These findings emphasized i) the transferability of the lab-scale degradation experiments to real world and that ii) insufficient removals may cause adverse effects in the aquatic environment due to the ability of the precursor steroids and TPs to interact with the endocrine system in biota. For the last goal, the conceptual study for glucocorticoids was applied to progestogens.
Here, two sub-types of the steroid family frequently used for hormonal contraception were selected (17α-hydroxyprogesterone and 19-norstestosterone type). The progestogens showed a fast and complete degradation within six hours, and thus empathizes pronounced biodegradability. However, cyproterone acetate and dienogest Summary have been found to be more recalcitrant in activated sludge treatment. This was consistent with their ubiquitously occurrence during the previous monitoring campaign. The elucidation of TPs again revealed some crucial information regarding the observed behavior and highlighted furthermore the formation of hazardous TPs. It was shown that 19-nortestosterone type steroids are able to undergo aromatization at ring A in contact with activated sludge, leading to the formation of estrogen-like TPs with a phenolic moiety at ring A. In the case of norethisterone the formation of 17α-ethinylestradiol was confirmed, which is a well-known potent synthetic estrogen with elevated ecotoxicological potency. Thus, the results indicated for the very first time an unknown source of estrogenic compounds, particularly for 17α-ethinylestradiol. In conclusion, some steroids were found to be very stable in activated sludge treatment, others degrade well, and others which do degrade but predominantly to active TPs depending on their chemical structure. Fluorinated acetal steroids such as triamcinolone acetonide and fluocinolone acetonide are poorly biodegradable, which is reflected in high concentrations detected ubiquitously in WWTP effluents. Endogenous steroids and their most related synthetic once such as hydrocortisone, prednisolone or 17α-hydroxyprogesterone are readily biodegradable. Regardless their high influent concentrations, they are almost completely removed in conventional WWTPs. Steroids between this range have been found to form elevated quantities of TPs which are partially still active, which particularly the case for betamethasone, fluticasone propionate, cyproterone acetate or dienogest. The thesis illustrates the need for an extensive evaluation of the environmental risks and carried out that corticosteroids and progestogens merit more attention in environmental regulatory and research than it is currently the case