Refine
Year of publication
- 2019 (125) (remove)
Document Type
- Bachelor Thesis (41)
- Master's Thesis (37)
- Doctoral Thesis (31)
- Part of Periodical (9)
- Report (3)
- Other (2)
- Book (1)
- Habilitation (1)
Is part of the Bibliography
- no (125) (remove)
Keywords
- Vorlesungsverzeichnis (3)
- Datenschutz (2)
- Immersion (2)
- Inklusion (2)
- Internet of Things (2)
- Parteienkommunikation (2)
- Weinbau (2)
- 2019 European Parliament Election (1)
- 3D-Scan (1)
- AR (1)
Institute
- Institut für Computervisualistik (38)
- Institut für Management (15)
- Institut für Wirtschafts- und Verwaltungsinformatik (12)
- Institute for Web Science and Technologies (7)
- Zentrale Einrichtungen (7)
- Fachbereich 7 (5)
- Institut für Softwaretechnik (5)
- Fachbereich 4 (3)
- Fachbereich 8 (3)
- Institut für Grundschulpädagogik (3)
With the appearance of modern virtual reality (VR) headsets on the consumer market, there has been the biggest boom in the history of VR technology. Naturally, this was accompanied by an increasing focus on the problems of current VR hardware. Especially the control in VR has always been a complex topic.
One possible solution is the Leap Motion, a hand tracking device that was initially developed for desktop use, but with the last major software update it can be attached to standard VR headsets. This device allows very precise tracking of the user’s hands and fingers and their replication in the virtual world.
The aim of this work is to design virtual user interfaces that can be operated with the Leap Motion to provide a natural method of interaction between the user and the VR environment. After that, subject tests are performed to evaluate their performance and compare them to traditional VR controllers.
The Internet of Things is still one of the most relevant topics in the field of economics and research powered by the increasing demand of innovative services. Cost reductions in manufacturing of IoT hardware and the development of completely new communication ways has led to the point of bil-lions of devices connected to the internet. But in order to rule this new IoT landscape a standardized solution to conquer these challenges must be developed, the IoT Architecture.
This thesis examines the structure, purpose and requirements of IoT Architecture Models in the global IoT landscape and proposes an overview across the selected ones. For that purpose, a struc-tured literature analysis on this topic is conducted within this thesis, including an analysis on three existing research approaches trying to frame this topic and a tool supported evaluation of IoT Archi-tecture literature with over 200 accessed documents.
Furthermore, a coding of literature with the help of the specialised coding tool ATLAS.ti 8 is conduct-ed on 30 different IoT Architecture Models. In a final step these Architecture Models are categorized and compared to each other showing that the environment of IoT and its Architectures gets even more complex the further the research goes.
Will Eisners Graphic Novels zeugen von einer tiefgehenden Identitifation mit dem Judentum als Volkszugehörigkeit, Religion und Kultur und spiegeln das Judentum in all seinen Facetten wider. Dabei ist besonders hervorzuheben, dass die Entwicklung des Gesamtwerks parallel verläuft zur Geschichte der Emanzipation der jüdischen Bevölkerung in New York City. Der Band clustert die jüdischen Aspekte in Eisners Werk in beispielsweise Faktoren kollektiver Erinnerung, Umgang mit und Kampf gegen Antisemitismus und religiöse Besonderheiten.
Clubs, such as Scouts, rely on the work of their volunteer members, who have a variety of tasks to accomplish. Often there are sudden changes in their organization teams and offices, whereby planning steps are lost and inexperience in planning occurs. Since the special requirements are not covered by already existing tools, ScOuT, a planning tool for the organization administration, is designed and developed in this work to support clubs with regard to the mentioned problems. The focus was on identifying and using various suitable guidelines and heuristic methods to create a usable interface. The developed product was evaluated empirically by a user survey in terms of usability.
The result of this study shows that already a high degree of the desired goal could be reached by the inclusion of the guidelines and methods. From this it can be concluded that with the help of user-specific concept ideas and the application of suitable guidelines and methods, a suitable basis for a usable application to support clubs can be created.
To construct a business process model manually is a highly complex and error-prone task which takes a lot of time and deep insights into the organizational structure, its operations and business rules. To improve the output of business analysts dealing with this process, different techniques have been introduced by researchers to support them during construction with helpful recommendations. These supporting recommendation systems vary in their way of what to recommend in the first place as well as their calculations taking place under the hood to recommend the most fitting element to the user. After a broad introduction into the field of business process modeling and its basic recommendation structures, this work will take a closer look at diverse proposals and descriptions published in current literature regarding implementation strategies to effectively and efficiently assist modelers during their business process model creation. A critical analysis of presentations in the selected literature will point out strengths and weaknesses of their approaches, studies and descriptions of those. As a result, the final concept matrix in this work will give a precise and helpful overview about the key features and recommendation methods used and implemented in previous research studies to pinpoint an entry into future works without the downsides already spotted by fellow researchers.
This bachelor thesis deals with the conception, implementation and evaluation of a Jump'n'Run game and the consideration of the influence of achievment systems on players. In the game Age of Tunes you play Bardur, the beardless bard and have to try to free the cursed magical creatures in the world Harmonica. The emphasis of the thesis was the clean conception and gradual development of the game, appealing graphic quality, integration of opponents, a mini-game and the consideration of effects of an achievment system on players. In a final evaluation the game and the behavior could be evaluated regarding the achievments.
Groundwater is essential for the provision of drinking water in many areas around the world. The ecosystem services provided by groundwater-related organisms are crucial for the quality of groundwater-bearing aquifers. Therefore, if remediation of contaminated groundwater is necessary, the remediation method has to be carefully selected to avoid risk-risk trade-offs that might impact these valuable ecosystems. In the present thesis, the ecotoxicity of the in situ remediation agent Carbo-Iron (a composite of zero valent nano-iron and active carbon) was investigated, an estimation of its environmental risk was performed, and the risk and benefit of a groundwater remediation with Carbo-Iron were comprehensively analysed.
At the beginning of the work on the present thesis, a sound assessment of the environmental risks of nanomaterials was impeded by a lack of guidance documents, resulting in many uncertainties on selection of suitable test methods and a low comparability of test results from different studies with similar nanomaterials. The reasons for the low comparability were based on methodological aspects of the testing procedures before and during the toxicity testing. Therefore, decision trees were developed as a tool to systematically decide on ecotoxicity test procedures for nanomaterials. Potential effects of Carbo-Iron on embryonic, juvenile and adult life stages of zebrafish (Danio rerio) and the amphipod Hyalella azteca were investigated in acute and chronic tests. These tests were based on existing OECD and EPA test guidelines (OECD, 1992a, 2013a, 2013b; US EPA, 2000) to facilitate the use of the obtained effect data in the risk assessment. Additionally, the uptake of particles into the test organisms was investigated using microscopic methods. In zebrafish embryos, effects of Carbo-Iron on gene expression were investigated. The obtained ecotoxicity data were complemented by studies with the waterflea Daphnia magna, the algae Scenedesmus vacuolatus, larvae of the insect species Chironomus riparius and nitrifying soil microorganisms.
In the fish embryo test, no passage of Carbo-Iron particles into the perivitelline space or the embryo was observed. In D. rerio and H. azteca, Carbo-Iron was detected in the gut at the end of exposure, but no passage into the surrounding tissue was detected. Carbo-Iron had no significant effect on soil microorganisms and on survival and growth of fish. However, it had significant effects on the growth, feeding rate and reproduction of H. azteca and on survival and reproduction in D. magna. Additionally, the development rate of C. riparius and the cell volume of S. vacuolatus were negatively influenced.
A predicted no effect concentration of 0.1 mg/L was derived from the ecotoxicity studies based on the no-effect level determined in the reproduction test with D. magna and an assessment factor of 10. It was compared to measured and modelled environmental concentrations for Carbo-Iron after application to an aquifer contaminated with chlorohydrocarbons in a field study. Based on these concentrations, risk quotients were derived. Additionally, the overall environmental risk before and after Carbo-Iron application was assessed to verify whether the chances for a risk-risk trade-off by the remediation of the contaminated site could be minimized. With the data used in the present study, a reduced environmental risk was identified after the application of Carbo-Iron. Thus, the benefit of remediation with Carbo-Iron outweighs potential negative effects on the environment.
Deformable Snow Rendering
(2019)
Accurate snow simulation is key to capture snow's iconic visuals. Intricate
methods exist that attempt to grasp snow behaviour in a holistic manner. Computational complexity prevents them from reaching real-time performance. This thesis presents three techniques making use of the GPU that focus on the deformation of a snow surface in real-time. The approaches are examined by their ability to scale with an increasing number of deformation actors and their visual portrayal of snow deformation. The findings indicate that the approaches maintain real-time performance well into several hundred individual deformation actors. However, these approaches each have their individual restrictions handicapping the visual results. An experimental approach is to combine the techniques at reduced deformation actor count to benefit from the detailed, merged deformation pattern.
While the existing literature on cooperative R&D projects between firms and public research institutes (PRI) has made valuable contributions by examining various factors and their influence on different outcome measures, there has been no investigation of cooperative R&D project success between firms and PRI from a product competitive advantage perspective. However, insights into the development of a meaningful and superior product (i.e., product competitive advantage) are particularly important in the context of cooperative R&D projects between PRI and (mainly small and medium-sized) firms in the biotechnology industry in response to increasing competition to raise capital funds necessary for survival.
The objectives of this thesis are: (1) to elaborate the theoretical foundations which explain the achievement of a product competitive advantage in cooperative R&D projects between biotechnology firms and PRI, (2) to identify and empirically evaluate the determining factors for achieving a product competitive advantage in cooperative R&D projects between biotechnology firms and PRI, and (3) to show how cooperative R&D projects between biotechnology firms and PRI should be designed and executed to support the achievement of a product competitive advantage.
To accomplish these objectives, a model of determinants of product competitive advantage in cooperative R&D projects between biotechnology firms and PRI is developed by drawing from the theoretical foundations of resource-based theory and information-processing theory. The model is evaluated using data from 517 questionnaires on cooperative R&D projects between at least one biotechnology firm and one PRI. The data are analyzed using variance-based structural equation modeling (i.e., PLS-SEM) in order to conduct hypotheses testing. The evaluation of the empirical data includes an additional mediation analysis and the comparison of effects in subsamples.
The results demonstrate the importance of available resources and skills, as well as the proficient execution of marketing-related and technical activities for the achievement of a product competitive advantage in cooperative R&D projects between biotechnology firms and PRI. By identifying project-related and process-related factors affecting product competitive advantage and empirically testing their relationships, the research findings should be valuable for both researchers and practitioners. After discussing contributions and implications for research and practice, the present thesis concludes with limitations and avenues for future research.
Despite the inception of new technologies at a breakneck pace, many analytics projects fail mainly due to the use of incompatible development methodologies. As big data analytics projects are different from software development projects, the methodologies used in software development projects could not be applied in the same fashion to analytics projects. The traditional agile project management approaches to the projects do not consider the complexities involved in the analytics. In this thesis, the challenges involved in generalizing the application of agile methodologies will be evaluated, and some suitable agile frameworks which are more compatible with the analytics project will be explored and recommended. The standard practices and approaches which are currently applied in the industry for analytics projects will be discussed concerning enablers and success factors for agile adaption. In the end, after the comprehensive discussion and analysis of the problem and complexities, a framework will be recommended that copes best with the discussed challenges and complexities and is generally well suited for the most data-intensive analytics projects.
Student misbehavior and its treatment is a major challenge for teachers and a threat to their well-being. Indeed, teachers are obliged to punish student misbehavior on a regular basis. Additionally, teachers’ punishment decisions are among the most frequently reported situations when it comes to students’ experiences of injustice in school. By implication, it is crucial to understand teachers’ treatment of student misbehavior vis-à-vis students’ perceptions. One key dimension of punishment behavior reflects its underlying motivation and goals. People generally intend to achieve three goals when punishing misbehavior, namely, retribution (i.e., evening out the harm caused), special prevention (i.e., preventing recidivism of the offender), and general prevention (i.e., preventing imitation of others). Importantly, people’s support of these punishment goals is subject to hierarchy and power, implying that teachers’ and students’ punishment goal preferences differ. In this dissertation, I present three research projects that shed first light on teachers’ punishment and its goals along with the students’ perception of classroom intervention strategies pursuing these goals. More specifically, I first examined students’ (i.e., children’s) general support of each of the three punishment goals sketched above. Furthermore, I applied an attributional approach to understand and study the goals teachers intend to achieve when punishing student misbehavior. Finally, I investigated teachers’ and students’ support of the punishment goals regarding the same student misbehavior to directly compare their views on these goals and reactions pursuing them. In sum, the findings show that students generally prefer retribution and special prevention to general prevention, whereas teachers prefer general prevention and special prevention to retribution. This ultimately translates into a "mismatch" of teachers and students in their preferences for specific punishment goals, and the findings suggest that this may indeed enhance students’ perception of injustice. Overall, the results of the present research program may be valuable for the development of classroom intervention strategies that may reduce rather than enhance conflicts in student-teacher-interactions.
Für die Entwicklung sicherer Softwaresysteme erweitert UMLsec die UML durch die Definition von Sicherheitsanforderungen, die erfüllt sein müssen. In Klassendiagrammen können Attribute und Methoden von Klassen Sicherheitseigenschaften wie secrecy oder integrity haben, auf die nicht authorisierte Klassen keinen Zugriff haben sollten. Vererbungen zwischen Klassen erzeugen eine Komplexität und werfen die Frage auf, wie man mit der Vererbung von Sicherheitseigenschaften umgehen sollte. Neben der Option in sicherheitskritischen Fällen auf Vererbungen zu verzichten, gibt es im Gebiet der objektorientierten Datenbanken bereits viele allgemeine Recherchen über die Auswirkungen von Vererbung auf die Sicherheit. Das Ziel dieser Arbeit ist es, Ähnlichkeiten und Unterschiede von der Datenbankseite und den Klassendiagrammen zu identifizieren und diese Lösungsansätze zu übertragen und zu formalisieren. Eine Implementierung des Modells evaluiert, ob die Lösungen in der Praxis anwendbar sind.
Unterschiedliche Quellen (Print-Medien, Fernsehberichte u. Ä.) berichten immer wieder davon, dass es mit der Datenschutzkompetenz bei Kindern und Jugendlichen schlecht bestellt ist. Daher ist dem Thema Datenschutz im Informatikunterricht eine besondere Bedeutung zuzuschreiben.
Im Rahmen der Dissertation von Herrn Hug wird ein Datenschutzkompetenzmodell [Quelle INFOS17] entwickelt, anhand dessen die Datenschutzkompetenz von Schülerinnen und Schülern im Altern von 10 bis 13 Jahren gemessen werden kann.
Im Rahmen dieser Masterarbeit werden existierende Unterrichtsmaterialien zum Thema Datenschutz gesammelt und dazu eine Unterrichtsreihe entwickelt. Hierbei werden auch eigene Zugänge aufzeigt, um ein kohärentes und abgeschlossenes Projekt zu entwerfen, bei dem aktuelle Gefahren für Schülerinnen und Schüler aufgezeigt werden. Ziel ist es, dass die Schülerinnen und Schüler dazu befähigt werden, ihr Verhalten bezüglich Datenschutz besser einzuschätzen und verantwortungsvoller mit ihren persönlichen Daten umzugehen. Im Rahmen eines Feldversuches in einer 6. Klasse eines Gymnasiums wurde die Unterrichtsreihe erprobt.
Current political issues are often reflected in social media discussions, gathering politicians and voters on common platforms. As these can affect the public perception of politics, the inner dynamics and backgrounds of such debates are of great scientific interest. This thesis takes user generated messages from an up-to-date dataset of considerable relevance as Time Series, and applies a topic-based analysis of inspiration and agenda setting to it. The Institute for Web Science and Technologies of the University Koblenz-Landau has collected Twitter data generated beforehand by candidates of the European Parliament Election 2019. This work processes and analyzes the dataset for various properties, while focusing on the influence of politicians and media on online debates. An algorithm to cluster tweets into topical threads is introduced. Subsequently, Sequential Association Rules are mined, yielding wide array of potential influence relations between both actors and topics. The elaborated methodology can be configured with different parameters and is extensible in functionality and scope of application.
Literaturanalyse und Darstellung aktueller Forschungsschwerpunkte zum Thema Entrepreneurial Strategy
(2019)
Entrepreneurial Strategy ist in der Literaturwelt weit verbreitet. Dieser Begriff fand schon im 20. Jahrhundert seine Anwendung und zieht sich bis ins heutige Zeitalter weiter. Diese Beständigkeit und Entwicklung des Entrepreneurs und dem Wunsch nach einem eigenen Unternehmen trieben die Diskussion dieses Themas voran. Die Wahl der passenden unternehmerischen Strategie ist eine der wichtigsten Entscheidungen, die ein Unternehmer treffen muss. Diese Problematik sorgte für eine Analyse und genaue Forschung der Entscheidungen und Einflussfaktoren. Resultate davon wurden festgehalten und interpretiert um die Branche der Entrepreneure zu fördern und somit die Wirtschaft anzutreiben. In der vorliegenden Arbeit wird zunächst ein Grundverständnis für die wichtigsten Begrifflichkeiten ausgearbeitet. Grundlage dieser Bachelorarbeit ist jedoch, anhand einer Literaturanalyse nach Webster und Watson (2002) einen Einblick in die Forschung der Entwicklung von Entrepreneurial Strategy zu geben und den aktuellen Stand herauszuarbeiten. Anahnd dieser Literaturanalyse werden Referenzen, Konzepte und die Notwendigkeit von Strategien verdeutlicht und die Rolle in einem Start-Up erklärt. Aus der Analyse und dem Vergleich zu älteren Veröffentlichungen geht hervor, das der Prozess der Strategiefindung eine Differenzierung in zwei Teile aufweist. Es wird unter dem Strategiesuch- und dem Strategieauswahlprozess uinterschieden. Merkmale, die früher als Allgemeine Einflussfaktoren für die Wahl der Strategie angenommen wurden, werden in der heutigen Literatur den genauen Prozessen und Phasen zugeteilt. Das Resultiert, das Merkmale, wie die persönlichen Eigenschaften, die Umgebung und das Humankapital eines Unternehmers mehr Einfluss während dem Suchprozess haben als während der darauffolgenden Auswahl. Zudem wurden für die Auwahl Methoden und Richtlinien entwickelt, die dem Unternehmer helfen sollen seine Alternativen zu sortieren und daraus zu wählen.
The aim of this work is to develop a simple concept for monitoring dogs that are alone at home for several hours. The prototypical implementation of such a "DogCam" can be considered as proof of concept. The basis for the prototype‘s implementation are the requirements identified within a conducted requirement analysis. Furthermore, the present work shows which improvements and extensions of the prototypical "DogCam" are possible and which similar projects already exist.
Abstract
This bachelor thesis delivers a comprehensive overview of the topic Internet of Things (IoT). With the help of a first literature review, important characteristics, architectures, and properties have been identified. The main aim of this bachelor thesis is to determine whether the use of IoT in the transport of food, considering the compliance with the cold chain, can provide advantages for companies to reduce food waste. For this purpose, a second literature review has been carried out with food transport systems without the use, as well as with the use of IoT. Based on the literature review, it is possible at the end to determine a theoretical ‘ideal’ system for food transport in refrigerated trucks. The respective used technologies are also mentioned. The findings of several authors have shown that often significant improvements can be achieved in surveillance, transport in general, or traceability of food, and ultimately food waste can be reduced. However, benefits can also be gained using new non-IoT-based technologies. Thus, the main knowledge of this bachelor thesis is that a theoretical ‘ideal’ transport system contains a sensible combination of technologies with and without IoT. This system includes the use of a Wireless Sensor Network (WSN) for real-time food monitoring, as well as an alarm function when the temperature exceeds a maximum. Real-time monitoring with GPS coupled with a monitoring center to prevent traffic jams is another task. Smart and energy-efficient packaging, and finally the use of the new supercooling-technology, make the system significantly more efficient in reducing food waste. These highlights, that when choosing a transport system, which is as efficient and profitable as possible for food with refrigerated transport, companies need not just rely on the use of IoT. On this basis, it is advisable to combine the systems and technologies used so far with IoT in order to avoid as much food waste as possible.
A gonioreflectometer is a device to measure the reflection properties of arbitrary materials. In this work, such an apparatus is being built from easily obtainable parts. Therefore three stepper-motors and 809 light-emitting diodes are controlled by an Arduino microcontroller. RGB-images are captured with an industrial camera which serve as refelction data. Furthermore, a control software with several capture programs and a renderer for displaying the measured materials are implemented. These allow capturing and rendering entire bidirectional reflection distribution functions (BRDFs) by which also complex anisotropic material properties can be represented. Although the quality of the results has some artifacts due to shadows of the camera, these artifacts can be largely removed by using special algorithms like inpainting. In addition, the goniorefelctometer is applied to other use cases. One can perform 3D scans, light field capturing and light staging without altering the construction. The quality of these processes also meet the expectations in a positive way. Thus, the gonioreflectometer built in this work can be seen as a widely applicable and economical alternative to other publications.
The Internet of Things (IoT) is a fast-growing, technological concept, which aims to integrate various physical and virtual objects into a global network to enable interaction and communication between those objects (Atzori, Iera and Morabito, 2010). The application possibilities are manifold and may transform society and economy similarly to the usage of the internet (Chase, 2013). Furthermore, the Internet of Things occupies a central role for the realisation of visionary future concepts, for example, Smart City or Smart Healthcare. In addition, the utilisation of this technology promises opportunities for the enhancement of various sustainability aspects, and thus for the transformation to a smarter, more efficient and more conscious dealing with natural resources (Maksimovic, 2017). The action principle of sustainability increasingly gains attention in the societal and academical discourse. This is reasoned by the partly harmful consumption and production patterns of the last century (Mcwilliams et al., 2016). Relating to sustainability, the advancing application of IoT technology also poses risks. Following the precautionary principle, these risks should be considered early (Harremoës et al., 2001). Risks of IoT for sustainability include the massive amounts of energy and raw materials which are required for the manufacturing and operation of IoT objects and furthermore, the disposal of those objects (Birkel et al., 2019). The exact relations in the context of IoT and sustainability are insufficiently explored to this point and do not constitute a central element within the discussion of this technology (Behrendt, 2019). Therefore, this thesis aims to develop a comprehensive overview of the relations between IoT and sustainability.
To achieve this aim, this thesis utilises the methodology of Grounded Theory in combination with a comprehensive literature review. The analysed literature primarily consists of research contributions in the field of Information Technology (IT). Based on this literature, aspects, solution approaches, effects and challenges in the context of IoT and sustainability were elaborated. The analysis revealed two central perspectives in this context. IoT for Sustainability (IoT4Sus) describes the utilisation and usage of IoT-generated information to enhance sustainability aspects. In contrast, Sustainability for IoT (Sus4IoT) fo-cuses on sustainability aspects of the applied technology and highlights methods to reduce negative impacts, which are associated with the manufacturing and operation of IoT. Elaborated aspects and relations were illustrated in the comprehensive CCIS Framework. This framework represents a tool for the capturing of relevant aspects and relations in this context and thus supports the awareness of the link between IoT and sustainability. Furthermore, the framework suggests an action principle to optimise the performance of IoT systems regarding sustainability.
The central contribution of this thesis is represented by the providence of the CCIS Framework and the contained information regarding the aspects and relations of IoT and sustainability.
The goal of this thesis is to create a recommender system (RS) for business processes, based on the existing ProM plugin RegPFA. To accomplish this task, firstly an interface must be created that sets up and expands a database receiving probabilistic finite automata (PFA) created by RegPFA in tsml format as input. Secondly, a Java program must be designed that uses said database to recommend the process elements that are most likely to follow a given sequence of process elements.
Fachdidaktische und pädagogische Kompetenzen angehender Mathematiklehrkräfte für die Realschule
(2019)
Studien zur Wirksamkeit der Ausbildung von Lehrerinnen und Lehrern sind in der Regel fragebogenbasiert. In der vorliegenden Untersuchung wird ein anderer Ansatz gewählt, um die Kompetenzen angehender Mathematiklehrkräfte zu erheben und zu evaluieren. Die Studie untersucht anhand der unterrichtlichen Performanz, welche Kompetenzen Anwärterinnen und Anwärter in ihrer praktischen Ausbildung erworben haben. Der Analyse liegen 137 anonymisierte Niederschriften zu benote-ten Lehrproben von Anwärterinnen und Anwärtern im Fach Mathematik zugrunde. Diese bilden die Ausbildungsjahrgänge von 2004 bis 2011 ab. Die Anwärterinnen und Anwärter werden unterrichtspraktisch anhand der Niederschriften in Anlehnung an eine qualitative Inhaltsanalyse auf ihre Kompetenzausprägungen hin getestet. Dies erfolgt schwerpunktmäßig in den Bereichen Fachdidaktik, Fachmethodik, Classroom-Management und Gesprächsführung. Im Verlauf der Untersuchung wird deutlich, dass die Teilneh-mergruppe vor allem Stärken im methodischen Bereich hat. Hier können durchgehend gute Kompetenzausprägungen festgestellt werden. Über den gesamten Erhebungszeitraum zeigen sich hingegen in den Bereichen Classroom-Management und Gesprächsführung deutliche Defizite. Die fachdidaktischen Kompetenzen der angehenden Lehrkräfte entwickeln sich negativ: Ist zu Beginn der Erhebung noch etwa die Hälfte der Anwärterinnen und Anwärter im Bereich der Fachdidaktik zufriedenstellend einzustufen, gilt das im letzten Erhebungsjahrgang nur noch für knapp ein Fünftel der Probandinnen und Probanden. Es kann gezeigt werden, dass eine gute Notenfestsetzung eng mit den er-forderlichen Kompetenzen in der Fachdidaktik zusammenhängt.
Die vorliegende Studie bestätigt im Bereich der Fachdidaktik die Ergebnisse jener Studien, die auf Fragebögen basieren.
Es konnte zudem ein statistischer Zusammenhang zwischen den fachdidaktischen Fähigkeiten und den Steuerungskompetenzen hergestellt werden.
Business Process Querying (BPQ) is a discipline in the field of Business Process Man- agement which helps experts to understand existing process models and accelerates the development of new ones. Its queries can fetch and merge these models, answer questions regarding the underlying process, and conduct compliance checking in return. Many languages have been deployed in this discipline but two language types are dominant: Logic-based languages use temporal logic to verify models as finite state machines whereas graph-based languages use pattern matching to retrieve subgraphs of model graphs directly. This thesis aims to map the features of both language types to features of the other to identify strengths and weaknesses. Exemplarily, the features of Computational Tree Logic (CTL) and The Diagramed Modeling Language (DMQL) are mapped to one another. CTL explores the valid state space and thus is better for behavioral querying. Lacking certain structural features and counting mechanisms it is not appropriate to query structural properties. In contrast, DMQL issues structural queries and its patterns can reconstruct any CTL formula. However, they do not always achieve exactly the same semantic: Patterns treat conditional flow as sequential flow by ignoring its conditions. As a result, retrieved mappings are invalid process execution sequences, i.e. false positives, in certain scenarios. DMQL can be used for behavioral querying if these are absent or acceptable. In conclusion, both language types have strengths and are specialized for different BPQ use cases but in certain scenarios graph-based languages can be applied to both. Integrating the evaluation of conditions would remove the need for logic-based languages in BPQ completely.
The main goal of this paper is to ascertain, if neural networks (especially LSTM) are helpful in predicting processes by making predictions as accurately as possible.
TensorFlow is the used framework in Python to build recurrent neural networks. Two networks are built, whereby one is used for training and the other one for prediction.
Used datasets contain several processes with several events each. With those processes, the network ist trained and afterwards, the parameters are saved. The network for prediction uses these parameters to make predictions.
The neural network is able to make clear predictions about subsequent events. Even branches can be predicted.
When developed further, integration in other programs is possible. It is recommended to use unique names for the events or to rename them.
Wenn es um die Vermittlung und Förderung von Kompetenzen geht, die für die Transformation zu einer nachhaltigen Gesellschaft notwendig sind, nehmen angehende Lehrpersonen eine Schlüsselrolle ein. Mit der modellhaften Einführung des Zertifikatsstudiums „Bildung – Transformation – Nachhaltigkeit“ (BTN) an der Universität Koblenz-Landau bietet sich Lehramtsstudierenden aller Fächer und Schulformen die Möglichkeit, sich in verschiedenen Modulen – begleitend zum regulären Studium – wissenschaftlich fundiert, multiperspektivisch und praxisorientiert mit Aspekten nachhaltiger Entwicklung auseinanderzusetzen. Ziel ist es, Lehramtsstudierende mit relevanten Nachhaltigkeitskompetenzen auszustatten, sie für ihre Rolle in Bezug auf die notwendige Transformation hin zu einer nachhaltigen Gesellschaft zu sensibilisieren und sie zu befähigen, in ihrem zukünftigen Berufsleben an Schulen, Hochschulen oder außerschulischen Bildungseinrichtungen inklusive und systemische Nachhaltigkeitskonzepte zu implementieren. Ein besonderer Schwerpunkt des Zertifikats liegt auf der Förderung der Reflexionsfähigkeit der Studierenden. Das Zertifikat BTN ist ein Projekt des Zentrums für Bildung und Forschung an Außerschulischen Lernorten (ZentrAL) der Universität Koblenz-Landau und wurde durch die Deutsche Bundesstiftung Umwelt (DBU) als Pilotvorhaben gefördert.
In order to simulate realistic motion sequences, muscles must be able to be modelled anatomically correct. Yet it is only possible in SimPack to define muscles as a straight line between two points. This thesis presents an approach where ellipses can be defined through which a muscle must pass. The main problem is to calculate the length of this muscle through the ellipses. An algorithm is presented that calculates the shortest path of a muscle path through this ellipses. This algorithm is then implemented in Fortran 90 and integrated into an existing muscle model in SimPack.
In this thesis criteria and requirements for a successful collaboration platform for the improvement of communication between scientific institutes of the railway industry distributed worldwide are developed and evaluated. First, an introduction to collaboration platforms and their current market situation and trends will be given. The result-ing knowledge will be used for a qualitative content analysis in the form of interviews with the target group of the planned collaboration platform. Based on the basic knowledge and the interviews carried out, hypotheses for communication in scientific institutes will then be formed. These hypotheses serve to create a questionnaire for a quantitative survey of the target group. The following analysis of general collaboration platforms and those of the railway industry provides further insights and describes requirements for a successful conception of a collaboration platform.
A subsequently planned conception of this platform cannot be carried out within the scope of this research work due to a lack of meaningful results and information. The planned quantitative content analysis was too complex for the chosen research context. In this research work, the quantitative questioning will be prepared for the following research work in this topic area. Further work results will be evaluated and made available for the following research work.
Our work finds the fine grained edits in context of neighbouring tokens in Wikipedia articles. We cluster those edits according to similar neighbouring context. We encode neighbouring context into vector space using word vectors. We evaluate clusters returned by our algorithm on extrinsic and intrinsic metric and compare it with previous work. We analyse the relation between extrinsic and intrinsic measurements of fine grained edit tokens.
In this thesis, I present the results of my studies on taxonomy, systematics, and biogeography of Impatiens (Balsaminaceae) in Madagascar and the Comoro islands.
In Chapter 1 I reviewed the literature on taxonomy and classification of Balsaminaceae, on habitat, world distribution, morphology, molecular phylogenetics and infrageneric classification of the genus Impatiens. In Chapters 2-15 (Fischer & Rahelivololona 2002, 2003, 2004, 2007, 2015a, 2015b, 2015c, 2016, Fischer et al. 2004. 2017, 2018a, b submitted, Rahelivololona et al. 2003) I presented the first results of a revision of Balsaminaceae of Madagascar and the Comoro islands including the description of 78 new species. In Chapter 16 (Yuan et al. 2004) we worked on the phylogeny and biogeography of Balsaminaceae inferred from ITS sequences using combined results from molecular phylogenetic and morphological analyses. In Chapter 17 (Rahelivololona et al. 2018) we conducted a phylogeny and assessment of the infrageneric classification of species in the Malagasy Impatiens (Balsaminaceae) with a particular emphasis on taxa collected from Marojejy.
Below I summarise the most important findings of each chapter and provide an outlook for future studies.
How many species of Impatiens occur in Madagascar and the Comoro islands?
To provide additional information on the taxonomic revision of Impatiens in Madagascar and the Comoro islands, the identification of already described species as well as the description of new species was conducted. Based on herbarium specimens from BR, G, K, NEU, P, TAN and on living plants collected during several field trips, 78 new species and 6 nomina nova have been published and another 70 new taxa are already identified. Actually more than 260 species occur in Madagascar and the Comoro islands and all of them are endemic. For each species, a description of the morphology, phenology, ecology and known distribution range was provided. Apart from new taxa, the delimitation of already described species like Impatiens firmula Baker and Impatiens hildebrandtii Baill. could be clarified by studying the types and by observing the variability in the field.
Are the groups of Impatiens in Madagascar monophyletic, and what is the systematic position of Trimorphopetalum?
Yuan & al. (2004) conducted a molecular phylogenetic study to examine the morphological and karyological evolution, and the historical biogeography of the Balsaminaceae family by using nucleotide sequence data of internal transcribed spacer regions of nuclear ribosomal DNA. The results support the monophyly of the Malagasy endemic section Trimorphopetalum and show that the cleistogamous Impatiens inaperta should be included in the sect. Trimorphopetalum which is the most derived within Impatiens. Therefore, the section Preimpatiens proposed by Perrier de la Bâthie (1934) is paraphyletic.
Rahelivololona & al. (2018) provided a phylogenetic study focused on three subdivisions (based on macromorphological characters) proposed by Perrier de la Bâthie (1934). The analysis was done using two nuclear AP3/DEF homologues (ImpDEF1 and ImpDEF2) and the plastid atpB-rbcL spacer to reassess or assess the monophyly of the Malagasy Impatiens, of the sections Preimpatiens (Humblotianae and Vulgare groups) and Trimorphopetalum. A focus was on the species of Impatiens from the Marojejy National Park and of the morphologically variable species I. elatostemmoides, I. “hammarbyoides”, I. inaperta and I. manaharensis, using monophyly as the primary criterion.
As results the Malagasy Impatiens are paraphyletic and the section Preimpatiens sensu Perrier de la Bâthie (1934) (= subgen. Impatiens sensu Fischer & Rahelivololona 2002) was not resolved as a monophyletic group. The section Trimorphopetalum sensu Perrier de la Bâthie (1934) (= subgen. Trimorphopetalum sensu Fischer & Rahelivololona 2002), however, was strongly confirmed as a monophyletic lineage (BS: 92; BPP: 1). Neither the Humblotianae group nor the Vulgare group was supported as monophyletic. None of the morphologically variable species appeared to be monophyletic and the sampled species of Impatiens from the Marojejy National Park do also not form a monophyletic group.
What are the biogeographical position and the distribution patterns of Impatiens in Madagascar and the Comoro islands?
Investigation of the geographical affinities and species distribution of section Impatiens (including Humblotianae group and Vulgare group) and section Trimorphopetalum were conducted and the origin and evolution as well as species richness and endemism were discussed.
The isolation, the climate and the complex topography of Madagascar have generated the microhabitats and ecological niches favourable to the diversification of Impatiens species. Impatiens of Madagascar with 260 endemic species is actually the largest genus in Madagascar. Therefore, Madagascar and the Comoro islands are among the most species-rich regions in the world for Impatiens.
Future studies
In Impatiens on Madagascar, there remain numerous unresolved questions that need to be adressed:
• A further study based on a much larger molecular data set and sampling from the entire geographic ranges of Impatiens in Madagascar is needed to retest the monophyly of the different subgenera and sections, as well as a molecular dating of the Malagasy Impatiens.
• The study of pollinators as a key for understanding the radiation and species richness is required: Within Impatiens the different shapes of spur are related to pollinators (bees, birds, butterflies and moths). Therefore pollinator observation of specific species need to be done to understand the radiation of species by adaptation and coevolution with these pollinators. A pollination study with a large number of species within section Trimorphopetalum will help to understand the mechanism of complete disappearance of the spur, the shift of pollinators and the evolution of species richness.
• The destruction of the natural habitats of Impatiens and the subsequent reduction of humidity in logged area constitute a severe threat for the survival of many species. The conservation and reforestation of vulnerable areas such as Ankaratra, Daraina, Mandraka and Col des Tapia near Antsirabe is required.
• In terms of conservation and to mitigate the threat on the genus, a study on the ex-situ-conservation of Malagasy Impatiens species is very important as long as some species are suitable for horticultural purposes (e.g. Impatiens mayae-valeriae, Impatiens emiliae and species with broad red spur).
• Finally, the publication of the revision of Impatiens of Madagascar and the Comoro islands will help other botanists to identify the species and will thus increase our knowledge on the group.
Increasing innovation is the main reason of a changing daily work. The interaction of progressing digital technologies and our working society has originated the term “New Work”. “New Work” implies, that like spare time work time becomes part of the world of live. In this context, the self-responsibility, self-determination and self-realization of an individual in the professional as well as in the private environment is important.
The subject of this bachelor thesis is to evaluate the meaning of “New Work”. Also the components and the background is considered in detail by the literature analysis in order to answer the first research question "What is the meaning of the term “New Work" in research and practice?". For this purpose, the central contents of digitalization and technology, structure of work as well as work attitude of “New Work” are taken up and explicitly examined. What perception and what benefits employees and entrepreneurs have in relation to these contents is analyzed in the present bachelor thesis on the basis of a qualitative study. The collected results from the expert interviews also provide a comparison between entrepreneurs and employees understanding, attitude and feelings towards “New Work”.
The interviews show, that “New Work” has a positive influence on the personal and the professional development of individuals. In addition, “New Work” has created new perspectives and requirements for workers and employers. “New Work” is focusing on goal-oriented working attitude and displaces time-oriented work. Through the realization and implementation of these new perspectives and requirements, it results in a fulfilling feeling in the working and living world. Caused by the abolishment of boundaries, “New Work” can be realized. Due to a satisfying profession, the sense and purpose of the work is no longer questioned. The “New Work” development leads to a cultural revolution based and digital changes.
Die im Rahmen dieser Masterarbeit durchgeführte Analyse von Ernährungsumstellungen auf die vegane Ernährung in Form von vier Portraits lotet mit ihrer interdisziplinären Perspektive aus Gastrosophie, Ethnologie und Leibphilosophie die soziokulturellen Aspekte dieser Transmissionsprozesse aus. Dazu gehören der zivilisatorisch erlernte Umgang mit Nahrung, das Umsetzen und Reflektieren sinnlicher Wahrnehmungen im Ernährungsprozess und die Prägung von Relationen zwischen Essendem und Zu-Essendem. Geleitet wird die Analyse dabei von der Forschungsfrage: „Welche leiblich sinnlichen Wahrnehmungen geben den Anstoß zu einer Ernährungsumstellung und wie begleiten diese den Prozess der Umstellung?“. Damit gibt die Frage den Fokus auf das (leibliche) Wahrnehmungsvermögen des Menschen vor und begrenzt Ernährung bewusst nicht auf ihre physiologische Funktion der Energiegewinnung. Dadurch flicht sie sich in den Diskurs um den cultural turn in der Ernährungswissenschaft ein und zielt weg von der metabolischen Durchmessung des Essens, hin auf das Verständnis von Ernährung als Praxis des Sich-Einverleibens-von-Anderem – Essen als Vollzug von Beziehungen. Das Sich-Ernähren wird damit als sozial geprägter und leiblich vermittelter Erfahrungsvorgang sichtbar, der über das Geschmackserlebnis hinaus durch Betroffenheitserfahrung konstituiert wird. Durch das Zusammenbringen philosophischer Perspektiven, wie die der Gastrosophie Harald Lemkes, die Essen u. a. auch als Selbstbestimmung denkt, und soziologischen Theorien, wie die des Habitus-Konzepts nach Pierre Bourdieu, wird deutlich, wie die Wahrnehmungspraxis und -fähigkeit des Menschen, in ihrem leiblichsinnlichen Aspekt, die Verhaltensbestimmung im Umgang mit Nahrung und deren Quellen beeinflusst. Die vier Portraits entstanden während einer sechsmonatigen ethnographischen Feldforschung und stellen anonymisiert die Motivation, den Verlauf und das Konfliktthema der jeweiligen Ernährungsumstellung dar. Die Portraits sind sehr individuell und zeigen auf, wie und warum beispielsweise die gesundheitliche Selbstsorge oder das empathische Mitleiden mit Nutztieren Veränderungen oder Tabuisierungen im Ernährungshandeln anstoßen.
Im Bereich der Computergraphik bilden die Nicht-Photorealistischen Renderingverfahren einen Schwerpunkt in der technischen und wissenschaftlichen Visualisierung, vor allem aber in den künstlerischen Bereichen. Verschiedene Kunststile, sowie Zeichenmaterialien und ihre Eigenschaften stellen unterschiedliche Herausforderungen dar. Eine dieser Herausforderungen ist hierbei die Simulation flüssiger Zeichenmittel.
Diese Arbeit beschäftigt sich mit der Erstellung eines interaktiven Zeichensystems für ein flüssiges Zeichenmittel, der Aquarellmalerei. Für die Simulation wird eine raue Zeichengrundlage generiert, sowie die Fluid Simulation und das optische Farbverhalten der Aquarellmalerei implementiert.
Tracking is an integral part of many modern applications, especially in areas like autonomous systems and Augmented Reality. For performing tracking there are a wide array of approaches. One that has become a subject of research just recently is the utilization of Neural Networks. In the scope of this master thesis an application will be developed which uses such a Neural Network for the tracking process. This also requires the creation of training data as well as the creation and training of a Neural Network. Subsequently the usage of Neural Networks for tracking will be analyzed and evaluated. This includes several aspects. The quality of the tracking for different degrees of freedom will be checked as well as the the impact of the Neural Network on the applications performance. Additionally the amount of required training data is investigated, the influence of the network architecture and the importance of providing depth data as part of the networks input. This should provide an insight into how relevant this approach could be for its adoption in future products.
This Bachelor thesis describes the conception, implementation and evaluation of a playful augmented reality application for mobile devices. Building on the ARCore SDK, the game pARcours was developed, where the player can place virtual objects in the real environment to build their own parcours. This must be flown through with a likewise virtual aircraft. The main focus in the implementation of the game was on the interaction with the virtual objects and the collision detection of these with real surfaces. Furthermore, various input methods for building the parcours and controlling the aircrafts were examined. In a final evaluation both the game and the various input methods could be evaluated, as well as ARCore with regard to the development of augmented reality applications.
Grapevine growers have struggled with defending their crops against pests and diseases since the domestication of grapevine over 6000 ears ago. Since then, new growing methods paired with a better nderstanding of the ecological processes in the vineyard ecosystem continue to improve quality and quantity of grape harvests. In this thesis I am describing the effects of two recent innovations in viticulture on pest and beneficial arthropods in vineyards; Fungus-resistant grapevine cultivars (PIWIs) and the pruning system semi-minimal pruned hedge (SMPH). The SMPH pruning system allows for a drastic reduction of manual labor in the vineyard, and PIWIs are resistant to two of the most common fungal diseases of grapevine and therefore allow a drastic reduction of fungicide applications compared to conventional varieties. Heavy use of pesticides is linked to a number of problems, including pollution of waterways, negative effects on human health, and biodiversity loss. Here, I studied the effects of fungicide reduction and minimal pruning on arthropods that are beneficial for natural pest suppression in the vineyard ecosystem such as predatory mites, spiders, ants, earwigs, and lacewings. All of these groups either benefitted from the reduction of fungicide sprayings or were not significantly affected. Structural changes in the canopy of SMPH grapevines altered the microclimate in the canopy which in turn influenced some of the arthropods living in it. Overall, my findings suggest that PIWIs and SMPH, both in combination or separately, improve conditions for natural pest control. This adds to other advantages of these innovative management practices such as a reduction in production cost and a smaller impact on the environment.
Die Nachhaltigkeitsberichterstattung kann als ein zentrales Element einer konsequenten Unternehmensstrategie zur Umsetzung der gesellschaftlichen Verantwortung (Corporate Social Responsibility) angesehen werden. Um die Unternehmen bei dieser Aufgabe zu unterstützen stellt die Global Reporting Initiative (GRI) mit ihren G4 Leitlinien einen Orientierungsrahmen bereit, dessen Anwendung sich allerdings für Klein und Mittelunternehmen sehr komplex gestaltet. Ein branchenspezifisches Sector Supplement für den Weinbau existiert derzeit noch nicht.
Ziel der vorliegenden Arbeit ist es, diese Forschungslücke durch die Entwicklung weinbauspezifischer Nachhaltigkeitsaspekte und Indikatoren zu schließen, um den Betrieben eine selbstständige GRI-konforme Berichterstattung zu ermöglichen.
Der Prozess zur Identifikation wesentlicher Nachhaltigkeitsaspekte und -indikatoren erfolgt mittels Erhebungs- und Auswertungsmethoden der qualitativen Sozialforschung in Form
von Workshops, betrieblichen Vorortanalysen und Experteninterviews.
Parallel dazu erfolgt eine umfassende Analyse der weinbaulichen Wertschöpfungskette in Form einer Internet- und Literaturrecherche. Diese umfasst vorrangig die ökologischen Nachhaltigkeitsaspekte als diejenigen Bestandteile weinbaulicher Tätigkeiten, die sich sowohl positiv als auch negativ auf die Umwelt auswirken können. Anschließend erfolgt die zentrale Priorisierung der identifizieren Handlungsfelder und Nachhaltigkeitsthemen durch die Stakeholder. Zur Visualisierung der bewerteten Handlungsfelder dient das Instrument der Wesentlichkeitsanalyse.
Auf dieser Basis erfolgt die Entwicklung eines Handlungsleitfadens zur Erstellung von Nachhaltigkeitsberichten in der Weinwirtschaft. Hiermit erlangen Weingüter die praktische Kompetenz ein eigenes Nachhaltigkeitsreporting anzugehen.
Im Rahmen der Arbeit wurde auch ein elektronisches Tool entwickelt, das den Betrieben die Möglichkeit eröffnet, betriebliche Umweltaspekte zu erfassen und zu bewerten. Gleichzeitig wird den Anwendern damit die Generierung eines überbetrieblichen Vergleichs der Umweltleistung ermöglicht (Benchmarking).
Eine weitere Forschungsfrage der vorliegenden Arbeit beschäftigt sich mit der Biodiversitätserfassung und -bewertung für Rebland. Hintergrund sind die bisher nur geringen Funde auf der durch das Bundesamt für Naturschutz festgelegten Kennartenlisten bzw. den HNV-Stichprobenflächen (High nature value farmland-Indikator) für Rebland.
Hierzu wurde mittels Geoinformationssystemen das Artenvorkommen in rheinland-pfälzischen Weinanbaugebieten analysiert und 30 Pflanzenarten als Indikatorarten für den Weinbau abgeleitet. Ergänzend wurden weinbergstypische, geschützte Tierarten als „Bonusarten“ identifiziert. Die Indikatorarten werden den Winzern als ein Instrument zur eigenständigen Erfassung der Biodiversität in den Weinbergen dienen und im Rahmen einer Nachhaltigkeitsberichterstattung herangezogen werden können.
Diese Arbeit soll das von Dietz und Oppermann entwickelte Planspiel „Datenschutz 2.0“ an den heutigen Alltag der Schüler anpassen, die Benutzung in der Sekundarstufe II ermöglichen und die technischen und gesetzlichen Problematiken des Planspiels beheben. Das mit dem Planspiel aufgegriffene Thema Datenschutz ist im rheinland-pfälzischen Informatik-Lehrplan für die Sekundarstufe II verankert. Hier wird der Begriff Datenschutz in der Reihe „Datenerhebung unter dem Aspekt Datenschutz beurteilen“ genannt. Jedoch werden in dem Planspiel keine Daten erhoben, sondern die selbst hinterlassenen Datenspuren untersucht. Diese Form des Datenschutzes ist im Grundkurs in der vorgeschlagenen Reihe „Datensicherheit unter der Berücksichtigung kryptologischer Verfahren erklären und beachten“ unter dem Thema Kommunikation in Rechnernetzen zu finden. Im Leistungskurs steht die Datensicherheit in gleichbenannter Reihe und Thema und in der Reihe „Datenerhebung unter dem Aspekt Datenschutz beurteilen“ im Thema Wechselwirkung zwischen Informatiksysteme, Individuum und Gesellschaft.
This scientific paper deals with the question to which extend the increasing digitization has an impact on work-life balance. Answering this question is the main goal of this study.
To reach this goal a literature review is made, in which it is possible to create a direct correlation between the subjective feel of work-life balance and the perceived stress level. With the help of Antonovsky’s salutogenesis model (1997) from the stress research field, factors are ascertained which determine the perceived stress level and linked with that the perceived work-life balance. These stress-influencing factors are examined through a qualitative content analysis by Mayring (2014) on a base of a problem-centered interview.
The results suggest that the digitization has impact on all these ascertained factors and linked to them on the work-life balance. This shows, that the digitization influences us in almost every aspect of work or private life. Whether this impact is positive or negative towards the work life balance depends on the individual, that assesses this factor. Clear distinctions can be made between people working in an IT-based job and those that do not. In comparison, people with IT-based jobs perceive a substantial better impact of digitization on work-life balance.
Die didaktische Konzeption der Schreibkonferenz ist soweit etabliert, dass sie bereits in den rheinland-pfälzischen Rahmenplan für die Grundschule für das Fach Deutsch übernommen wurde. Bisher liegt eine Reihe von Erfahrungsberichten zur Schreibkonferenz vor, jedoch wurden dazu bislang kaum systematisch empirische Untersuchungen durchgeführt. Die empirische Studie dieser Arbeit, welche an die VERA-Studie angeschlossen ist, untersucht, ob im Grundschulunterricht (in der dritten und vierten Klasse) der Einsatz von Schreibkonferenzen im Vergleich zur konventionellen Aufsatzdidaktik zu einer Verbesserung der Schreibleistungen, des eigenen Lernens, zu positiven Veränderungen des eigenen Verhaltens sowie zur Förderung der Motivation der Schüler beim Schreiben führt. Dabei wird von folgenden Überlegungen ausgegangen: Zum einen sollte die Schreibkonferenz im Gegensatz zur traditionellen Aufsatzdidaktik das selbstständige Arbeiten der Schüler mit Texten im Deutschunterricht fördern, zum anderen sollte sie zu einer intensiveren Auseinandersetzung mit Texten und damit zu einer Verbesserung des Aufsatzschreibens führen.
Recently the workflow control as well as compliance analysis of the Enterprise Resource Planning systems are of a high demand. In this direction, this thesis presents the potential of developing a Workflow Management System upon a large Enterprise Resource Planning system by involving business rule extraction, business process discovery, design of the process, integration and compliance analysis of the system. Towards this, usability, limitations and challenges of every applied approach are deeply explained in the case of an existing system named SHD ECORO.
Unkontrolliert gewachsene Software-Architekturen zeichnen sich i.d.R. durch fehlende oder schlecht nachvollziehbare Strukturen aus. Hierfür können als Gründe beispielsweise mangelhafte Definitionen oder ein langsames Erodieren sein. Dies ist auch unter dem Begriff "Big Ball of Mud" bekannt. Langfristig erhöhen solche architekturellen Mängel nicht nur die Entwicklungskosten, sondern können letztendlich auch Veränderungen vollständig verhindern.
Die Software-Architektur benötigt somit eine kontinuierliche Weiterentwicklung, um solchen Effekten entgegen wirken zu können. Eine gute Software-Architektur unterstützt die Software-Entwicklung und erhöht die Produktivität. Auf der Ebene von Quellcode existieren bereits etablierte Vorgehensweisen zur kontrollierten Verbesserung der Qualität. Im Gegensatz hierzu existieren für Verbesserungen einer Software-Architektur jedoch keine allgemeingültigen Vorgehensweisen, welche unabhängig vom Anwendungsfall angewandt werden können. An diesem Punkt setzt die vorliegende Arbeit an.
Bisherige Arbeiten beschäftigen sich einerseits nur mit Teilpunkten des Problems. Anderseits existieren zwar bereits Vorgehensweisen zum Treffen von Architekturentscheidungen, jedoch agieren diese auf einer stark abstrakten Ebene ohne praktische Beispiele. Diese Arbeit stellt eine leichtgewichtige Vorgehensweise zum gezielten Verbessern einer Software-Architektur vor. Die Vorgehensweise basiert auf einem generischen Problemlösungsprozess. Auf dieser Basis ist ein Prozess zum Lösen von Problemen einer Software-Architektur entwickelt worden. Im Fokus der Arbeit stehen zur Eingrenzung des Umfanges architektonische Probleme aufgrund geforderter Variabilität sowie externer Abhängigkeiten.
Die wissenschaftliche Methodik, welcher der Arbeit zugrunde liegt, agiert im Rahmen der Design Science Research (DSR). Über mehrere Iterationen hinweg wurde eine Vorgehensweise entwickelt, welche sich an Softwareentwickler mit zwei bis drei Jahren Erfahrung und Kenntnissen über Grundlage der Softwareentwicklung und Software-Architektur richtet. Fünf Schritte inkl. Verweise auf aussagekräftige Literatur leiten Anwender anschließend durch den Prozess zur gezielten Verbesserung einer Software-Architektur.
Willingness to pay and willingness to accept on a two-sided platform - The use case of DoBeeDo
(2019)
It is widely known that especially for technology-based start-ups, entrepreneurs need to set up the boundaries of the business and define the product/service to offer in order to minimize the risk of failure. The goal of this thesis is to not only emphasize the importance of the business model development and evaluation but also show an example customer validation process for an emerging start-up named DoBeeDo, which is a mobile app operating on a two-sided market. During the process of customer validation a survey has been conducted to evaluate the interest of the target groups as well as the fit of their expectations using the Willingness to Pay and Willingness to Accept measures. The paper includes an analysis and evaluation of the gathered results and assesses whether the execution of the Customer Development Model can be continued.
Commonsense reasoning can be seen as a process of identifying dependencies amongst events and actions. Understanding the circumstances surrounding these events requires background knowledge with sufficient breadth to cover a wide variety of domains. In the recent decades, there has been a lot of work in extracting commonsense knowledge, a number of these projects provide their collected data as semantic networks such as ConceptNet and CausalNet. In this thesis, we attempt to undertake the Choice Of Plausible Alternatives (COPA) challenge, a problem set with 1000 questions written in multiple-choice format with a premise and two alternative choices for each question. Our approach differs from previous work by using shortest paths between concepts in a causal graph with the edge weight as causality metric. We use CausalNet as primary network and implement a few design choices to explore the strengths and drawbacks of this approach, and propose an extension using ConceptNet by leveraging its commonsense knowledge base.
Within the framework of a participatory action research approach, teachers and their students were accompanied scientifically with a focus on Montessori pedagogy and music in an upper secondary grammar school for three years (from 2012-2015).
Based on attitude- and self-efficacy-theories, inclusive instruction as well as agent-based research, the aim was to examine the implementation of an inclusive learning - and school-culture at this grammar school – an institution which is part of the highly selective education system at secondary II level in Austria.
It has been possible to reconstruct the understanding of teachers concerning inclusion and conceptions of man as well as their selfefficacy of competences to teach in an inclusive environment by means of qualitative and quantitative data. To examine attitudes and selfefficacy of teacher competences, international and national tested scales SACIE-R (Sentiments, Attitudes and Concerns about Inclusive Education-Revised) and TEIP (Teacher Efficacy for Inclusive Practice) were used in a German version. Furthermore, the empirical survey was extended by a webbased national questionnaire for teachers in different types of schools, from primary to secondary level (n= 427) to allow comparative analysis. Interviews, which were evaluated content-analytically and ques-tionnaires for parents (n=37) and students (n=19) offered an indepth insight into everyday educational practice from different perspectives.
The synopsis of the result shows, that it was possible for a rather young team of teachers with very positive attitudes towards inclusion, to implement a supportive and vivid learning - and school culture. Nevertheless, the efforts of the teachers did not exceed the system limits. The development towards a ‘school for all’, a logical consequence of theoretical approaches concerning inclusion, was not discovered. The current research is verifying the corefindings of inclusive - and agent-based research. Further findings can be related to the selective structures of the education system in secondary II.
Thesis is devoted to the topic of challenges and solutions for human resources management (HRM) in international organizations. The aim is to investigate methodological approaches to assessment of HRM challenges and solutions, and to apply them on practice, to develop ways of improvement of HRM of a particular enterprise. The practical research question investigated is “Is the Ongoing Professional Development – Strategic HRM (OPD-SHRM) model a better solution for HRM system of PrJSC “Philip Morris Ukraine”?”
To achieve the aim of this work and to answer the research question, we have studied theoretical approaches to explaining and assessing HRM in section 1, analyzed HRM system of an international enterprise in section 2, and then synthesized theory and practice to find intersection points in section 3.
Research findings indicate that the main challenge of HRM is to balance between individual and organizational interests. Implementation of OPD-SHRM is one of the solutions. Switching focus from satisfaction towards success will bring both tangible and intangible benefits for individuals and organization. In case of PrJSC “Philip Morris Ukraine”, the maximum forecasted increase is 330% in net profit, 350% in labor productivity, and 26% in Employee Development and Engagement Index.
Die vorliegende Arbeit hat die Adaption der Übersetzung des Fragebogens zu Kompetenz- und Kontrollüberzeugungen nach Günter Krampen aus dem Jahr 1991 zum Ziel und prüft die Übersetzung auf ihre Gültigkeit und Richtigkeit. Nach der Erklärung des Forschungsinteresses und der Herleitung des psychologischen Konstruktes der Kontrolle, sowie der Vorstellung des behandelten Fragebogens, werden Methoden der Übersetzung psychologischer Messinstrumente vorgestellt und im Anschluss des Übersetzungsprozesses des Fragebogens dargestellt, welcher aus einem Team-Ansatz bestand und durch die Kontrolle mehrerer Personen einen hohen Qualitätsanspruch garantiert. Die Endfassung des Fragebogens wird an einer Stichprobe von N=129 polnischen Probanden untersucht und mit einer deutschen Kontrollgruppe von N=52 Probanden, sowie der Normierungsstichprobe aus dem deutschen Manual des Fragebogens zu Kompetenz- und Kontrollüberzeugungen (Krampen, 1991) verglichen. Teststatistische Kennwerte wie die Mittelwerte und Standardabweichungen der Items aber auch der Subskalen weisen eine große Ähnlichkeit der Fragebogenversionen auf. Ebenso können die Trennschärfen der Items im Gruppenvergleich der drei Stichproben als zufriedenstellend angesehen werden. Die interne Konsistenz sowie die Testhalbierungsreliabilität können für die Subskalen sowie den gesamten Fragebogen in der polnischen Version größtenteils bestätigt werden, sodass die Übersetzung als reliabel anzusehen ist. Darüber hinaus kann die Validität durch testtheoretisch adäquate Skaleninterkorrelationen und die Validierung mit dem externen Faktor des Wohlbefindens bestätigt werden. Die qualitative Erhebung zur Überprüfung des Verständnisses der übersetzten Items, zeigt zudem ein homogenes unidimensionales Bild und bestätigt die Qualität der Übersetzung. Die faktorielle Analyse zeigt jedoch im Gegensatz zu den restlichen Untersuchungen deutliche Unterschiede auf, da aus der polnischen Stichprobe eine zweifaktorielle Lösung auf Sekundärskalenniveau hervorgeht, wohingegen die Normstichprobe des Manuals, sowie die deutsche Stichprobe konstruktdifferenzierte und in der Theorie des Fragebogens begründete vierfaktorielle Ausgaben aufzeigt. In jeder Version des Fragebogens wurden jedoch schwach ladende und faktoriell nicht klar zuordbare Items gefunden, welche eine statistische Itembereinigung des Fragebogens in der zukünftigen Arbeit mit dem Messinstrument legitimieren. Diese Unterschiede bestätigt auch die Procustean Factor Rotation, welche korrelative Differenzen zwischen den Faktoranalysen der deutschen und polnischen Daten anzeigt und in einer weiteren Untersuchung näher beleuchtet werden sollte. Zusammenfassend kann die Übersetzung des Fragebogens zu Kompetenz- und Kontrollüberzeugungen als gelungen angesehen werden, auch wenn der Fragebogen sowohl in seiner Originalfassung als auch in der polnischen Version einer Optimierung unterlaufen sollte.
Das „Templerhaus“ in Boppard.
Kunsthistorische Untersuchung eines spätromanischen Baudenkmals
(2019)
Die vorliegende Bachelorarbeit untersucht die Namens-, Besitz- und Nutzungsgeschichte des sogenannten Templerhauses, einem massiven Profanbau der Stauferzeit in Boppard (Rheinland-Pfalz). Nach einer Beschreibung des heutigen Erscheinungsbildes und der Erarbeitung früherer Zustände erfolgt ein stilkritischer Vergleich mit ausgewählten Beispielen der Umgebung, der Rekonstruktionsversuch früherer Bauphasen und eine Einordnung in den städtischen Kontext.
This work describes a novel software tool for visualizing anatomical segmentations of medical images. It was developed as part of a bachelor's thesis project, with a view to supporting research into automatic anatomical brain image segmentation. The tool builds on a widely-used visualization approach for 3D image volumes, where sections in orthogonal directions are rendered on screen as 2D images. It implements novel display modes that solve common problems with conventional viewer programs. In particular, it features a double-contour display mode to aid the user's spatial orientation in the image, as well as modes for comparing two competing segmentation labels pertaining to one and the same anatomical region. The tool was developed as an extension to an existing open-source software suite for medical image processing. The visualization modes are, however, suitable for implementation in the context of other viewer programs that follow a similar rendering approach.
The modified code can be found here: soundray.org/mm-segmentation-visualization.tar.gz.