Thousands of chemicals from daily use are being discharged from civilization into the water cycle via different pathways. Ingredients of personal care products, detergents, pharmaceuticals, pesticides, and industrial chemicals thus find their way into the aquatic ecosystems and may cause adverse impacts on the ecology. Pharmaceuticals for instance, represent a central group of anthropogenic chemicals, because of their designed potency to interfere with physiological functions in organisms. Ecotoxicological effects from pharmaceutical burden have been verified in the past. Therapeutic groups with pronounced endocrine disrupting potentials such as steroid hormones gain increasing focus in environmental research as it was reported that they cause endocrine disruption in aquatic organisms even when exposed to environmentally relevant concentrations. This thesis considers the comprehensive investigation of the occurrence of corticosteroids and progestogens in wastewater treatment plant (WWTP) effluents and surface waters as well as the elucidation of the fate and biodegradability of these steroid families during activated sludge treatment. For the first goal of the thesis, a robust and highly sensitive analytical method based on liquid chromatography-tandem mass spectrometry (LC-MS/MS) was developed in order to simultaneously determine the occurrence of around 60 mineralocorticoids, glucocorticoids and progestogens in the aquatic environment. A special focus was set to the compound selection due to the diversity of marketed synthetic steroids. Some analytical challenges have been approved by individual approaches regarding sensitivity enhancement and compound stabilities. These results may be important for further research in environmental analysis of steroid hormones. Reliable and low quantification limits are the perquisite for the determination of corticosteroids and progestogens at relevant concentrations due to low consumption volumes and simultaneously low effect-based trigger values. Achieved quantification limits for all target analytes ranged between 0.02 ng/L and 0.5 ng/L in surface water and 0.05 ng/L to 5 ng/L in WWTP effluents. This sensitivity enabled the detection of three mineralocorticoids, 23 glucocorticoids and 10 progestogens within the sampling campaign around Germany. Many of them were detected for the first time in the environment, particularly in Germany and the EU. To the best of our knowledge, this in-depth steroid screening provided a good overview of single steroid burden and allowed for the identification of predominantly steroids of each steroid type analyzed for the first time. The frequent detection of highly potent synthetic steroids (e.g. triamcinolone acetonide, clobetasol propionate, betamethasone valerate, dienogest, cyproterone acetate) highlighted insufficient removal during conventional Summary wastewater treatment and indicated the need for regulation to control their emission since the steroid concentrations were found to be above the reported effect-based trigger values for biota. Overall, the study revealed reliable environmental data of poorly or even not analyzed steroids. The results complement the existing knowledge in this field but also providednew information which can beused particularly for compound prioritization in ecotoxicological research and environmental analysis. Based on the data obtained from the monitoring campaign, incubation experiments were conducted to enable the comparison of the biodegradability and transformation processes in activated sludge treatment for structure-related steroids under aerobic and standardized experimental conditions. The compounds were accurately selected to cover manifold structural moieties of commonly used glucocorticoids, including non-halogenated and halogenated steroids, their mono- and diesters, and several acetonide-type steroids. This approach allowed for a structure-based interpretation of the results. The obtained biodegradation rate constants suggested large variations in the biodegradability (half-lifes ranged from < 0.5 h to > 14 d). An increasing stability was identified in the order from non-halogenated steroids (e.g. hydrocortisone), over 9α-halogenated steroids (e.g. betamethasone), to C17-monoesters (e.g. betamethasone 17-valerate, clobetasol propionate), and finally to acetonides (e.g. triamcinolone acetonide), thus suggesting a strong relationship of the biodegradability with the glucocorticoid structure. Some explanations for this behavior have been received by identifying the transformation products (TPs) and elucidating individual transformation pathways. The results revealed the identification of the likelihood of transformation reactions depending on the chemical steroid structure for the first time. Among the identified TPs, the carboxylates (e.g. TPs of fluticasone propionate, triamcinolone acetonide) have been shown persistency in the subsequent incubation experiments. The newly identified TPs furthermore were frequently detected in the effluents of full-scale wastewater treatment plants. These findings emphasized i) the transferability of the lab-scale degradation experiments to real world and that ii) insufficient removals may cause adverse effects in the aquatic environment due to the ability of the precursor steroids and TPs to interact with the endocrine system in biota. For the last goal, the conceptual study for glucocorticoids was applied to progestogens. Here, two sub-types of the steroid family frequently used for hormonal contraception were selected (17α-hydroxyprogesterone and 19-norstestosterone type). The progestogens showed a fast and complete degradation within six hours, and thus empathizes pronounced biodegradability. However, cyproterone acetate and dienogest Summary have been found to be more recalcitrant in activated sludge treatment. This was consistent with their ubiquitously occurrence during the previous monitoring campaign. The elucidation of TPs again revealed some crucial information regarding the observed behavior and highlighted furthermore the formation of hazardous TPs. It was shown that 19-nortestosterone type steroids are able to undergo aromatization at ring A in contact with activated sludge, leading to the formation of estrogen-like TPs with a phenolic moiety at ring A. In the case of norethisterone the formation of 17α-ethinylestradiol was confirmed, which is a well-known potent synthetic estrogen with elevated ecotoxicological potency. Thus, the results indicated for the very first time an unknown source of estrogenic compounds, particularly for 17α-ethinylestradiol. In conclusion, some steroids were found to be very stable in activated sludge treatment, others degrade well, and others which do degrade but predominantly to active TPs depending on their chemical structure. Fluorinated acetal steroids such as triamcinolone acetonide and fluocinolone acetonide are poorly biodegradable, which is reflected in high concentrations detected ubiquitously in WWTP effluents. Endogenous steroids and their most related synthetic once such as hydrocortisone, prednisolone or 17α-hydroxyprogesterone are readily biodegradable. Regardless their high influent concentrations, they are almost completely removed in conventional WWTPs. Steroids between this range have been found to form elevated quantities of TPs which are partially still active, which particularly the case for betamethasone, fluticasone propionate, cyproterone acetate or dienogest. The thesis illustrates the need for an extensive evaluation of the environmental risks and carried out that corticosteroids and progestogens merit more attention in environmental regulatory and research than it is currently the case

In this thesis, the performance of the IceCube projects photon propagation code (clsim) is optimized. The process of GPU code analysis and perfor- mance optimization is described in detail. When run on the same hard- ware, the new version achieves a speedup of about 3x over the original implementation. Comparing the unmodified code on hardware currently used by IceCube (NVIDIA GTX 1080) against the optimized version run on a recent GPU (NVIDIA A100) a speedup of about 9.23x is observed. All changes made to the code are shown and their performance impact as well as the implications for simulation accuracy are discussed individually. The approach taken for optimization is then generalized into a recipe. Programmers can use it as a guide, when approaching large and complex GPU programs. In addition, the per warp job-queue, a design pattern used for load balancing among threads in a CUDA thread block, is discussed in detail.

Soziale Netzwerke spielen im Alltagsleben der Schülerinnen und Schüler eine entscheidende Rolle. Im Rahmen der vorliegenden Masterarbeit wurde ein Konzept für die Anzeige von Profilvorschlägen innerhalb des sozialen Netzwerks „InstaHub“, welches ein speziell für den Informatikunterricht programmiertes Werkzeug zum Thema „Datenbanken“ darstellt, entwickelt. Als Hürde stellte sich dabei dar, dass von den etablierten sozialen Netzwerken nur wenig bis gar keine Informationen über die Berechnung von Profil- oder Freundschaftsvorschlägen preisgegeben werden. Daher wurde zunächst das Wesen von Beziehungen zwischen Menschen in nicht-internetbasierten und in internetbasierten sozialen Netzwerken sowie die Gründe für Beziehungen zwischen Menschen in diesen Netzwerken dargelegt. Anhand der Beobachtung von Vorschlägen in anderen sozialen Netzwerken sowie der in InstaHub gespeicherten Nutzerdaten wurde ein Algorithmus für Profilvorschläge in InstaHub entworfen und mitsamt einer passenden Visualisierung entsprechend implementiert. Den zweiten Teil der Arbeit bildete eine Unterrichtseinheit für die Sekundarstufe II mit dem Thema Gefahren der Erzeugung und Verarbeitung von personenbezogenen Daten. In der Unterrichtseinheit dienen die Profilvorschläge in InstaHub, die auf von InstaHub über dessen Nutzer gesammelten Daten aufbauen, als Einstieg in die Thematik. Anschließend wird der Fokus von sozialen Netzwerken auf andere Online-Dienste erweitert und auf die Verarbeitung und Weitergabe dieser Daten eingegangen.

Habitat loss and fragmentation due to climate and land-use change are among the biggest threats to biodiversity, as the survival of species relies on suitable habitat area and the possibility to disperse between different patches of habitat. To predict and mitigate the effects of habitat loss, a better understanding of species dispersal is needed. Graph theory provides powerful tools to model metapopulations in changing landscapes with the help of habitat networks, where nodes represent habitat patches and links indicate the possible dispersal pathways between patches. This thesis adapts tools from graph theory and optimisation to study species dispersal on habitat networks as well as the structure of habitat networks and the effects of habitat loss. In chapter 1, I will give an introduction to the thesis and the different topics presented in this thesis. Chapter 2 will then give a brief summary of tools used in the thesis. In chapter 3, I present our model on possible range shifts for a generic species. Based on a graph-based dispersal model for a generic aquatic invertebrate with a terrestrial life stage, we developed an optimisation model that models dispersal directed to predefined habitat patches and yields a minimum time until these patches are colonised with respect to the given landscape structure and species dispersal capabilities. We created a time-expanded network based on the original habitat network and solved a mixed integer program to obtain the minimum colonisation time. The results provide maximum possible range shifts, and can be used to estimate how fast newly formed habitat patches can be colonised. Although being specific for this simulation model, the general idea of deriving a surrogate can in principle be adapted to other simulation models. Next, in chapter 4, I present our model to evaluate the robustness of metapopulations. Based on a variety of habitat networks and different generic species characterised by their dispersal traits and habitat demands, we modeled the permanent loss of habitat patches and subsequent metapopulation dynamics. The results show that species with short dispersal ranges and high local-extinction risks are particularly vulnerable to the loss of habitat across all types of networks. On this basis, we then investigated how well different graph-theoretic metrics of habitat networks can serve as indicators of metapopulation robustness against habitat loss. We identified the clustering coefficient of a network as the only good proxy for metapopulation robustness across all types of species, networks, and habitat loss scenarios. Finally, in chapter 5, I utilise the results obtained in chapter 4 to identify the areas in a network that should be improved in terms of restoration to maximise the metapopulation robustness under limited resources. More specifically, we exploit our findings that a network’s clustering coefficient is a good indicator for metapopulation robustness and develop two heuristics, a Greedy algorithm and a deducted Lazy Greedy algorithm, that aim at maximising the clustering coefficient of a network. Both algorithms can be applied to any network and are not specific to habitat networks only. In chapter 6, I will summarize the main findings of this thesis, discuss their limitations and give an outlook of future research topics. Overall this thesis develops frameworks to study the behaviour of habitat networks and introduces mathematical tools to ecology and thus narrows the gap between mathematics and ecology. While all models in this thesis were developed with a focus on aquatic invertebrates, they can easily be adapted to other metapopulations.

Ray tracing acceleration through dedicated data structures has long been an important topic in computer graphics. In general, two different approaches are proposed: spatial and directional acceleration structures. The thesis at hand presents an innovative combined approach of these two areas, which enables a further acceleration of the tracing process of rays. State-of-the-art spatial data structures are used as base structures and enhanced by precomputed directional visibility information based on a sophisticated abstraction concept of shafts within an original structure, the Line Space. In the course of the work, novel approaches for the precomputed visibility information are proposed: a binary value that indicates whether a shaft is empty or non-empty as well as a single candidate approximating the actual surface as a representative candidate. It is shown how the binary value is used in a simple but effective empty space skipping technique, which allows a performance gain in ray tracing of up to 40% compared to the pure base data structure, regardless of the spatial structure that is actually used. In addition, it is shown that this binary visibility information provides a fast technique for calculating soft shadows and ambient occlusion based on blocker approximations. Although the results contain a certain inaccuracy error, which is also presented and discussed, it is shown that a further tracing acceleration of up to 300% compared to the base structure is achieved. As an extension of this approach, the representative candidate precomputation is demonstrated, which is used to accelerate the indirect lighting computation, resulting in a significant performance gain at the expense of image errors. Finally, techniques based on two-stage structures and a usage heuristic are proposed and evaluated. These reduce memory consumption and approximation errors while maintaining the performance gain and also enabling further possibilities with object instancing and rigid transformations. All performance and memory values as well as the approximation errors are measured, presented and discussed. Overall, the Line Space is shown to result in a considerate improvement in ray tracing performance at the cost of higher memory consumption and possible approximation errors. The presented findings thus demonstrate the capability of the combined approach and enable further possibilities for future work.

The sediments of surface waters are temporary or final depository of many chemical compounds, including trace metals and metalloids (metal(loid)s) from natural and anthropogenic sources. Whether they act as a source or sink of metal(loid)s depends strongly on the dynamics of the biogeochemical processes that take place at the sediment-water interface (SWI). Important information on biogeochemical processes as well as on the exposure, the fate and the transport of pollutants at the SWI can be obtained by determining chemical concentration profiles in the sediment pore water. A major challenge is to conduct experiments with a spatial resolution, which allows to adequately record existing gradients and to log all the parameters needed, to describe and better understand the complex processes at the SWIs. At the same time, it is from major importance to prevent the formation of any artifacts during sampling, which may occur due to the labile nature of the SWIs and the very steep biogeochemical gradients. In this context, in the first part of this work, a system was developed and tested that enables the automated, minimal invasive sampling of sediment pore water of undisturbed or manipulated sediments while simultaneously recording parameters such as redox potential, oxygen content and pH value. In an incubation experiment the impact of acidification and mechanical disturbance (re-suspension) on the mobility of 13 metal(loid)s was investigated using a triple quadrupole inductively coupled plasma-mass spectrometry (ICP-QQQ-MS) multi-element approach. Most metals were released as consequence of sulfide weathering whereas mechanical disturbance had a major impact on the mobility of the oxide forming elements As, Mo, Sb, U and V. Additionally, options were demonstrated to address with the system the size fractionation of metal(loid)s in pore water samples and the speciation of As(III/V) and Sb(III/V). In the second part, the focus, with a similar experimental design, was placed on the processes leading to the release of metal(loid)s. For this purpose, two incubation experiments with different oxygen supply were conducted in parallel. For the first time the nonmetals carbon, phosphorus and sulfur were analyzed simultaneous to 13 metal(loid)s in sediment pore water by ICP-QQQ-MS. Throughout the experiment metal(loid) size fractionation was monitored. It was confirmed that resuspension promotes the mobility of metalloids such as As, Sb and V, while the release of most metals was largely attributed to pyrite weathering. The colloidal (0.45-16 μm) contribution in terms of mobilization was only relevant for a few elements. Finally, the sampling system was used as part of a new approach to sediment risk assessment. Undisturbed sediment cores from differently contaminated positions in the Trave estuary were examined, considering 16 metal(loid)s, the non-metals C, P and S and the ions NH4+, PO43- and SO42-. By the first in-depth comparison with in-situ dialysis-based pore water sampling the ability of the suction-based approach to represent field conditions was proven. The pore water studies together with supplementing resuspension experiments in bio-geochemical microcosms and sequential extraction identified the most “pristine” sediment of the study area as posing the greatest risk of metal(loid) release. However, the potentially released amounts per kg of sediment are only a few parts per thousand of the average daily loads of the Trave river.

Satzung der örtlichen Studierendenschaft an der Universität Koblenz-Landau, Campus Landau Dreizehnte Ordnung zur Änderung der Prüfungsordnung für die Prüfung im lehramtsbezogenen Bachelorstudiengang Berufsbildende Schulen an der Universität Koblenz-Landau, der Hochschule Koblenz und der Philosophisch-Theologischen Hochschule Vallendar Zwölfte Ordnung zur Änderung der Ordnung für die Prüfung im Masterstudiengang Lehramt an berufsbildenden Schulen an der Universität Koblenz-Landau, der Hochschule Koblenz und der Philosophisch-Theologischen Hochschule Vallendar Zweiundzwanzigste Ordnung zur Änderung der Ordnung für die Prüfung im lehramtsbezogenen Zertifikatsstudiengang (Erweiterungsprüfung) an der Universität Koblenz-Landau und der Hochschule Koblenz Erste Ordnung zur Änderung der Grundordnung der Universität Koblenz-Landau Wahlordnung für die Wahlen der Organe der Universität Koblenz-Landau

Satzung zur Festsetzung von Zulassungszahlen an der Universität Koblenz-Landau für das Studienjahr 2020/2021 Satzung zur Festsetzung der Normwerte für den Ausbildungsaufwand (Curricularnormwerte) der Universität Koblenz-Landau Ordnung zur Änderung der Einschreibeordnung für die Universität Koblenz-Landau Einundzwanzigste Ordnung zur Änderung der Ordnung für die Prüfung im lehramtsbezogenen Zertifikatsstudiengang (Erweiterungsprüfung) an der Universität Koblenz-Landau und der Hochschule Koblenz Siebenundzwanzigste Ordnung zur Änderung der Prüfungsordnung für die Prüfung im lehramtsbezogenen Bachelorstudiengang an der Universität Koblenz- Landau Dreiundzwanzigste Ordnung zur Änderung der Prüfungsordnung für die Prüfung in den Masterstudiengängen für das Lehramt an Grundschulen, das Lehramt an Realschulen plus, das Lehramt an Förderschulen sowie das Lehramt an Gymnasien an der Universität Koblenz-Landau Zwanzigste Ordnung zur Änderung der Prüfungsordnung für die Prüfung im Zwei-Fach-Bachelorstudiengang an der Universität Koblenz-Landau Erste Ordnung zur Änderung der Prüfungsordnung für Studierende des Masterstudiengangs „Germanistik: Dynamiken der Vermittlung“ des Fachbereichs 2: Philologie / Kulturwissenschaften an der Universität Koblenz-Landau Sechste Ordnung zur Änderung der Ordnung für die Prüfung im Bachelorstudiengang und im Masterstudiengang BioGeoWissenschaften der Universität Koblenz-Landau Prüfungsordnung für den Bachelorstudiengang „Psychologie“ des Fachbereichs Psychologie der Universität Koblenz-Landau, Campus Landau Dritte Ordnung zur Änderung der Gemeinsamen Prüfungsordnung für den Bachelorstudiengang „Mathematische Modellierung“ und den Masterstudiengang „Mathematical Modeling of Complex Systems“ an der Universität Koblenz-Landau Vierte Ordnung zur Änderung der Gemeinsamen Prüfungsordnung für den Bachelorstudiengang „Angewandte Naturwissenschaften“ und den Masterstudiengang „Chemie und Physik funktionaler Materialien / Chemistry and Physics of functional Materials“ an der Universität Koblenz-Landau Rahmenprüfungsordnung der Universität Koblenz- Landau im Zusammenhang mit der SARS-CoV-2 (Corona)-Pandemie Änderung der Anlage der Ordnung für die Prüfung im Masterstudiengang Applied Physics an der Hochschule Koblenz und der Universität Koblenz-Landau (Kooperativer Masterstudiengang) Erste Ordnung zur Änderung der Prüfungsordnung für den Bachelorstudiengang „Mensch und Umwelt: Psychologie, Kommunikation, Ökonomie“ an der Universität Koblenz-Landau, Campus Landau Erste Ordnung zur Änderung der Promotionsordnung des Fachbereichs 8: Psychologie der Universität Koblenz-Landau

Enterprise Collaboration Systems (ECS) have become substantial for computer-mediated communication and collaboration among employees in organisations. As ECS combine features from social media and traditional groupware, a growing number of organisations implement ECS to facilitate collaboration among employees. Consequently, ECS form the core of the digital workplace. Thus, the activity logs of ECS are particularly valuable since they provide a unique opportunity for observing and analysing collaboration in the digital workplace. Evidence from academia and practice demonstrates that there is no standardised approach for the analysis of ECS logs and that practitioners struggle with various barriers. Because current ECS analytics tools only provide basic features, academics and practitioners cannot leverage the full potential of the activity logs. As ECS activity logs are a valuable source for understanding collaboration in the digital workplace, new methods and metrics for their analysis are required. This dissertation develops Social Collaboration Analytics (SCA) as a method for measuring and analysing collaboration activities in ECS. To address the existing limitations in academia and practice and to contribute a method and structures for applying SCA in practice, this dissertation aims to answer two main research questions: 1. What are the current practices for measuring collaboration activities in Enterprise Collaboration Systems? 2. How can Social Collaboration Analytics be implemented in practice? By answering the research questions, this dissertation seeks to (1) establish a broad thematic understanding of the research field of SCA and (2) to develop SCA as a structured method for analysing ac-tivity logs of ECS. As part of the first research question, this dissertation documents the status quo of SCA in the academic literature and practice. By answering the second research question, this dissertation contributes the SCA framework (SCAF), which guides the practical application of SCA. SCAF is the main contribution of this dissertation. The framework was developed based on findings from an analysis of 86 SCA studies, results from 6 focus groups and results from a survey among 27 ECS user companies. The phases of SCAF were derived from a comparison of established process models for data mining and business intelligence. The eight phases of the framework contain detailed descriptions, working steps, and guiding questions, which provide a step by step guide for the application of SCA in practice. Thus, academics and practitioners can benefit from using the framework. The constant evaluation of the research outcomes in focus groups ensures both rigour and relevance. This dissertation employs a qualitative-dominant mixed-methods approach. As part of the university-industry collaboration initiative IndustryConnect, this research has access to more than 30 leading ECS user companies. Being built on a key case study and a series of advanced focus groups with representatives of user companies, this dissertation can draw from unique insights from practice as well as rich data with a longitudinal perspective.

The flexible integration of information from distributed and complex information systems poses a major challenge for organisations. The ontology-based information integration concept SoNBO (Social Network of Business Objects) developed and presented in this dissertation addresses these challenges. In an ontology-based concept, the data structure in the source systems (e.g. operational application systems) is described with the help of a schema (= ontology). The ontology and the data from the source systems can be used to create a (virtualised or materialised) knowledge graph, which is used for information access. The schema can be flexibly adapted to the changing needs of a company regarding their information integration. SoNBO differs from existing concepts known from the Semantic Web (OBDA = Ontology-based Data Access, EKG = Enterprise Knowledge Graph) both in the structure of the company-specific ontology (= Social Network of Concepts) as well as in the structure of the user-specific knowledge graph (= Social Network of Business Objects) and makes use of social principles (known from Enterprise Social Software). Following a Design Science Research approach, the SoNBO framework was developed and the findings documented in this dissertation. The framework provides guidance for the introduction of SoNBO in a company and the knowledge gained from the evaluation (in the company KOSMOS Verlag) is used to demonstrate its viability. The results (SoNBO concept and SoNBO framework) are based on the synthesis of the findings from a structured literature review and the investigation of the status quo of ontology-based information integration in practice: For the status quo in practice, the basic idea of SoNBO is demonstrated in an in-depth case study about the engineering office Vössing, which has been using a self-developed SoNBO application for a few years. The status quo in the academic literature is presented in the form of a structured literature analysis on ontology-based information integration approaches. This dissertation adds to theory in the field of ontology-based information integration approaches (e. g. by an evaluated artefact) and provides an evaluated artefact (the SoNBO Framework) for practice.

Graph-based data formats are flexible in representing data. In particular semantic data models, where the schema is part of the data, gained traction and commercial success in recent years. Semantic data models are also the basis for the Semantic Web - a Web of data governed by open standards in which computer programs can freely access the provided data. This thesis is concerned with the correctness of programs that access semantic data. While the flexibility of semantic data models is one of their biggest strengths, it can easily lead to programmers accidentally not accounting for unintuitive edge cases. Often, such exceptions surface during program execution as run-time errors or unintended side-effects. Depending on the exact condition, a program may run for a long time before the error occurs and the program crashes. This thesis defines type systems that can detect and avoid such run-time errors based on schema languages available for the Semantic Web. In particular, this thesis uses the Web Ontology Language (OWL) and its theoretic underpinnings, i.e., description logics, as well as the Shapes Constraint Language (SHACL) to define type systems that provide type-safe data access to semantic data graphs. Providing a safe type system is an established methodology for proving the absence of run-time errors in programs without requiring execution. Both schema languages are based on possible world semantics but differ in the treatment of incomplete knowledge. While OWL allows for modelling incomplete knowledge through an open-world semantics, SHACL relies on a fixed domain and closed-world semantics. We provide the formal underpinnings for type systems based on each of the two schema languages. In particular, we base our notion of types on sets of values which allows us to specify a subtype relation based on subset semantics. In case of description logics, subsumption is a routine problem. For the type system based on SHACL, we are able to translate it into a description logic subsumption problem.

Plastic, and so microplastics (MP), are globally present and represent an increasingly significant problem for the environment. In order to understand the distribution and impact of MP it is important to identify and quantify MP over a wide range of sizes and to ensure comparability of studies. However, comparability of studies is made difficult or even impossible by different MP concentration data. There still is a great need for research in the field of size-independent, quantitative analysis of MP in environmental samples, especially with regard to mass-based MP concentration information. Therefore, this thesis aims to utilize quantitative ¹H-NMR spectroscopy (qNMR) as an alternative method in MP analysis. The qNMR method is a size-independent, mass-based method which can be used as an alternative for MP analysis and has potential for routine analysis. The proof-of-concept was demonstrated for LDPE, PET and PS particles (Chapter 2). Additionally, PVC, PA, and ABS particles were tested to cover the most important polymer types for MP-analysis (Chapter 3). Moreover, using PET, PVC and PS as examples it was examined whether the qNMR method can also be transferred to the more cost-effective NoD method (Chapter 4). Results of method validation of both methods (1D and NoD) show that quantification using the qNMR method is not only possible in principle, but also shows high accuracy (88.0-110 %) and detection limits (1 – 84 µg) that lie within the environmentally relevant range. Furthermore, it was examined whether not only high-field instruments are suitable for MP analysis, but also benchtop devices (low-field instruments), which are much more cost-effective in purchase and maintenance. Increasing measurement times for PET and PS to 30 min and for PVC to 140 min, the lower measuring frequency especially concerning resolving capacity could be compensated (Chapter 4). To address the question of potential matrix effects of environmental samples, matrix effects and recovery rates of sample preparation procedures, which have been developed specifically for the application of the qNMR method were investigated using PET fibers as an example (Chapter 5). It could be shown that environmental matrices do not interfere with the quantitative analysis of MP using qNMR methods. Specific sample preparation methods developed for qNMR analysis can be used with recovery rates > 80 % for different environmental matrices (Chapter 5). Finally, first orienting investigations for the simultaneous determination of several polymer types in one sample are reported (Chapter 6).

Successful export sectors in manufacturing and agribusiness are important drivers of structural transformation in Sub-Sahara African countries. Backed by industrial policies and active state involvement, a small number of successful productive export sectors has emerged in Sub-Saharan Africa. This thesis asks the question: How do politics shape the promotion of export-driven industrialisation and firm-level upgrading in Sub-Saharan Africa? It exemplifies this question with an in-depth, qualitative study of the cashew processing industry in Mozambique in the period from 1991 until 2019. Mozambique used to be one of the world’s largest producers and processors of cashew nuts in the 1960s and 1970s. At the end of the 20th century, the cashew processing industry broke down completely but has re-emerged as one of the country’s few successful agro-processing exports. The thesis draws on theoretical approaches from the fields of political science, notably the political settlements framework, global value chain analysis and the research on technological capabilities to explore why the Mozambican Government supported the cashew processing industry and how Mozambican cashew processors acquired the technological capabilities needed to access the global cashew value chain and to upgrade. It makes an important theoretical contribution by linking the political settlements framework and the literature on upgrading in global value chains to study how politics shaped productive sector promotion and upgrading in the Mozambican cashew processing industry. The findings of the thesis are based on extensive primary data, including 58 expert interviews and 10 firm surveys, that was collected in Mozambique in 2018 as well as a broad base of secondary literature. The thesis argues that the Mozambican Government supported the cashew processing industry because it became important for the Government’s political survival. Promoting the cashew sector formed part of an electoral strategy for the ruling FRELIMO coalition and a means to keep FRELIMO factions united by offering economic opportunities to key constituencies. In 1999, it adopted a protectionist cashew law that created strong incentives for cashew processing in Mozambique. This not only facilitated the re-emergence of the cashew processing industry after its breakdown. The law and the active involvement of the National Cashew Institute (INCAJU) also affected the governance of the local cashew value chain, the creation of backward linkages, and the upgrading paths of cashew processors. The findings of the thesis suggest that the cashew law reduced the pressure on the cashew processing industry to upgrade. The law further created opportunities for formal and informal rent creation for members of the political elite and lower level FRELIMO officials that prevented a far-reaching reform of the law. The thesis shows that international buyers do not promote upgrading among Sub-Sahara African firms in global value chains with market-based or modular governance. Moreover, firms that operate in countries where industrial policies are not enforced effectively cannot draw on the support of government institutions to enhance their capabilities and to upgrade. Firms therefore mainly depended on costly learning channels at firm level, e.g. learning by doing or hiring skilled labour, and/or on technical assistance from donors to build the technological capabilities needed to access global value chains and to remain competitive. The findings of the thesis suggest that researchers, governments, development practitioners and consultants need to rethink their understanding of upgrading in GVCs in four ways. First, they need to move away from understanding upgrading in terms of moving towards more complex, higher value-added activities in GVCs (functional upgrading). Instead, it is important to consider the potential of other, more realistic types of upgrading for firms in low-income countries, such reducing risks by diversifying suppliers and buyers or increasing rewards by making production processes more efficient. Second, they need to replace an overly positive view on upgrading that neglects possible side-effects at sector and/or country level. Third, GVC participation on its own does not promote upgrading among local supplier firms in Sub-Saharan Africa. The interests of lead firms and Sub-Sahara African supplier firms may not be aligned or even conflicting. Targeted industrial policies and the creation of institutions that effectively promote capability building among firms therefore become even more important. Finally, upgrading needs to be understood as a process that is not only shaped by interactions between firms, but also by local domestic politics. The findings of the thesis are highly relevant for scholars from the fields of political science, development studies, and economics. Its practical implications and tools, e.g. a technological capabilities matrix for the cashew industry, are of interest for development practitioners, members of public institutions in Sub-Sahara African countries, local entrepreneurs, and representatives of local business associations that are involved in promoting export sectors and upgrading among local firms.

Within the field of Business Process Management, business rules are commonly used to model company decision logic and govern allowed company behavior. An exemplary business rule in the financial sector could be for example: ”A customer with a mental condition is not creditworthy”. Business rules are usually created and maintained collaboratively and over time. In this setting, modelling errors can occur frequently. A challenging problem in this context is that of inconsistency, i.e., contradictory rules which cannot hold at the same time. For instance, regarding the exemplary rule above, an inconsistency would arise if a (second) modeller entered an additional rule: ”A customer with a mental condition is always creditworthy”, as the two rules cannot hold at the same time. In this thesis, we investigate how to handle such inconsistencies in business rule bases. In particular, we develop methods and techniques for the detection, analysis and resolution of inconsistencies in business rule bases

As a consequence of the world population increase and the resulting water scarcity, water quality is the object of growing attention. In that context, organic anthropogenic molecules — often defined as micropollutants— represent a threat for water resources. Among them, pharmaceuticals are the object of particular concerns due to their permanent discharge, their increasing consumption and their effect-based structures. Pharmaceuticals are mainly introduced in the environment via wastewater treatment plants (WWTPs), along with their metabolites and the on-site formed transformation products (TPs). Once in the aquatic environment, they partition between the different environmental compartments in particular the aqueous phase, suspended particulate matter(SPM) and biota. In the last decades, pharmaceuticals have been widely investigated in the water phase. However, extreme polar pharmaceuticals have rarely been monitored due to the lack of robust analytical methods. Moreover, metabolites and TPs have seldom been included in routine analysis methods although their environmental relevance is proven. Furthermore, pharmaceuticals have been only sporadically investigated in SPM and biota and adequate multi-residue methods are lacking to obtain comprehensive results about their occurrence in these matrices. This thesis endeavors to cover these gaps of knowledge by the development of generic multi-residue methods for pharmaceuticals determination in the water phase, SPM and biota and to evaluate the occurrence and partition of pharmaceuticals into these compartments. For a complete overview, a particular focus was laid on extreme polar pharmaceuticals, pharmaceutical metabolites and TPs. In total, three innovative multi-residue methods were developed, they include analytes covering a broad range of physico-chemical properties. First, a reliable multi-residue method was developed for the analysis of extreme polar pharmaceuticals, metabolites and TPs dissolved in water. The selected analytes covered a significant range of elevated polarity and the method would be easily expendable to further analytes. This versatility could be achieved by the utilization of freeze-drying as sample preparation and zwitterionic hydrophilic interaction liquid chromatography (HILIC) in gradient elution mode. The suitability of HILIC chromatography to simultaneously quantify a large range of micropollutants in aqueous environmental samples was thoroughly studied. Several limitations were pointed out: a very complex and time-consuming method development, a very high sensitivity with regards to modification of the acetonitrile to water ratio in the eluent or the diluent and high positive matrix effects for certain analytes. However, these limitations can be overcome by the utilization of a precise protocol and appropriate labeled internal standards. They are overmatched by the benefits of HILIC which permits the chromatographic separation of extreme polar micropollutants. Investigation of environmental samples showed elevated concentrations of the analytes in the water phase. In particular, gabapentin, metformin, guanylurea and oxypurinol were measured at concentrations in the µg/L range in surface water. Subsequently, a reliable multi-residue method was established for the determination of 57 pharmaceuticals, 47 metabolites and TPs sorbed to SPM down to the low ng/g range. This method was conceived to cover a large range of polarity in particular with the inclusion of extreme polar pharmaceuticals. The extraction procedure was based on pressurized liquid extraction (PLE) followed by a clean-up via solvent exchange and detection via direct injection-reversed-phase LC-MS/MS and freeze-drying HILIC-MS/MS. Pharmaceutical sorption was examined using laboratory experiments. Derived distribution coefficients Kd varied by five orders of magnitude among the analytes and confirmed a high sorption potential for positively charged and nonpolar pharmaceuticals. The occurrence of pharmaceuticals in German rivers SPM was evaluated by the investigation of annual composite SPM samples taken at four sites at the river Rhine and one site at the river Saar between the years 2005 and 2015. It revealed the ubiquitous presence of pharmaceuticals sorbed to SPM in these rivers. In particular, positively charged analytes, even very polar and nonpolar pharmaceuticals showed appreciable concentrations. For many pharmaceuticals, a distinct correlation was observed between the annual quantities consumed in Germany and the concentrations measured in SPM. Studies of composite SPM spatial distribution permitted to get hints about specific industrial discharge by comparing the pollution pattern along the river. For the first time, these results showed the potential of SPM for the monitoring of positively charged and nonpolar pharmaceuticals in surface water. Finally, a reliable and generic multi residue method was developed to investigate 35 pharmaceuticals and 28 metabolites and TPs in fish plasma, fish liver and fish fillet. For this matrix, it was very challenging to develop an adequate clean-up allowing for the sufficient separation of the matrix disturbances from the analytes. In the final method, fish tissue extraction was performed by cell disruption followed by a non-discriminating clean-up based on silica gel solid-phase extraction(SPE) and restrictive access media (RAM) chromatography. Application of the developed method to the measurement of bream and carp tissues from German rivers revealed that even polar micropollutants such as pharmaceuticals are ubiquitously present in fish tissues. In total, 17 analytes were detected for the first time in fish tissues, including 10 metabolites/TPs. The importance of monitoring metabolites and TPs in fish tissues was confirmed with their detection at similar concentrations as their parents. Liver and fillet were shown to be appropriate for the monitoring of pharmaceuticals in fish, whereas plasma is more inconvenient due to very low concentrations and collection difficulties. Elevated concentrations of certain metabolites suggest possible formation of human metabolites in fish. Measured concentrations indicate a low bioaccumulation potential for pharmaceuticals in fish tissues.

Although most plastic pollution originates on land, current research largely remains focused on aquatic ecosystems. Studies pioneering terrestrial microplastic research have adapted analytical methods from aquatic research without acknowledging the complex nature of soil. Meanwhile, novel methods have been developed and further refined. However, methodical inconsistencies still challenge a comprehensive understanding of microplastic occurrence and fate in and on soil. This review aims to disentangle the variety of state-of-the-art sample preparation techniques for heterogeneous solid matrices to identify and discuss best-practice methods for soil-focused microplastic analyses. We show that soil sampling, homogenization, and aggregate dispersion are often neglected or incompletely documented. Microplastic preconcentration is typically performed by separating inorganic soil constituents with high-density salt solutions. Not yet standardized but currently most used separation setups involve overflowing beakers to retrieve supernatant plastics, although closed-design separation funnels probably reduce the risk of contamination. Fenton reagent may be particularly useful to digest soil organic matter if suspected to interfere with subsequent microplastic quantification. A promising new approach is extraction of target polymers with organic solvents. However, insufficiently characterized soils still impede an informed decision on optimal sample preparation. Further research and method development thus requires thorough validation and quality control with well-characterized matrices to enable robust routine analyses for terrestrial microplastics.

Internationale Bildungsstudien (TIMSS und PISA) offenbarten, dass es deutschen Schülern nur begrenzt gelingt, ihr erworbenes Wissen im Physikunterricht zur Problemlösung in neuen Kontexten zu nutzen. Als Grund nennen die Studien die gering ausgeprägte Kompetenz-erwartung in Bezug zum Fach Physik. Die Folge ist eine geringe Motivation der Lernenden, physikalische Aufgaben zu lösen. Studien zeigen aber auch, dass die Motivation beim Lernen durch den Einsatz digitaler Lernmedien gesteigert werden konnte. Aus diesem Grund wird in dieser Arbeit untersucht, ob das Vertrauen in die eigenen Fähigkeiten durch das Lernen in einer integrierten Lernumgebung gefördert werden kann. Im Rahmen eines Design-Based-Research-Forschungsansatzes (DBR) wurde eine integrierte Lernumgebung „Wärmelehre“ mit digitalen Lernmedien für den Physikunterricht gestaltet, die dann in zwei Schulformen (IGS und Gymnasium) innerhalb einer quasi-experimentellen Feldstudie erprobt wurde. Im 1. Zyklus des DBR wurden die Wirkungen des selbstständigen Lernens mit digitalen/analogen Medien in Einzelarbeit untersucht. Die Ergebnisse der Wissenstests zeigen einen höheren Lernerfolg bei den Lernenden der Experimentalgruppen, der sich aber nicht signifikant von den Lernenden der Kontrollgruppen (analoge Medien) unterscheidet. Die Lernenden konnten sich in der integrierten Lernumgebung mit Unterstützung beider Medienformate selbstständig Fachwissen aneignen und problembasierte Textaufgaben lösen. Die Ergebnisse der Befragungen der Lernenden zeigen, dass sich die Lerngruppen signifikant in ihrem erlebten Grad der Selbststeuerung unterscheiden. Die Lernenden beider Experimentalgruppen bewerten ihren Handlungsspielraum besser als die Lernenden der beiden Kontrollgruppen. Ebenfalls konnte festgestellt werden, dass sich die individuellen Lernvoraussetzungen, der Lernstiltyp, das Kompetenzerleben und die Aspekte der Medien-gestaltung wechselseitig beeinflussen und auf den Lernerfolg wirken. Die Ergebnisse der Lernstilanalyse zeigen, dass sich selbst kleine Lerngruppen heterogen zusammensetzen. Demnach scheint es für einen guten Lernerfolg notwendig zu sein, dass die Lehrenden, die Lernumgebung an die individuellen Lernpräferenzen der Lernenden der Lerngruppe anpassen. Aus den Ergebnissen lässt sich als Konsequenz für den Physikunterricht ableiten, dass Selbstlernphasen mit digitalen Lernmedien regelmäßig in den Unterricht integriert werden sollten, um die Problemlöse- und die Selbststeuerungskompetenz zu fördern. Es ist von Vorteil, wenn die Lehrenden für die Gestaltung einer Lernumgebung, das Vorwissen, die individuellen Lernvoraussetzungen und die Zusammensetzung der Lerngruppe (Lernstiltyp) als Qualitätsdimensionen erfassen. Im Re-Design werden Vorschläge unterbreitet, wie die integrierte Lernumgebung lernstilgerecht weiterentwickelt werden kann. Im 2. Zyklus soll dann erforscht werden, ob sich Unterschiede im Lernerfolg und in den untersuchten Aspekten zeigen, wenn die Lernenden in Einzelarbeit, in Partnerarbeit oder in ihrer Lernstilgruppe selbstgesteuert lernen, um die Lernumgebung zyklisch weiterzuentwickeln.

Obwohl Kinder beim Bauen mit Bauklötzen bereits früh Erfahrungen mit Aspekten der Stabilität von Bauwerken, wie z. B. Kräfteverteilung, Standfestigkeit sowie Gleich- und Gegengewicht, sammeln und es verschiedene Studien gibt, die den fächerübergreifenden Lerngehalt von Bauklötzen hervorheben, ist das Verständnis bezüglich der Stabilität von Bauklotzanordnungen bisher kaum erforscht. Daher wurde untersucht, welche Vorstellungen sechs- bis siebenjährige Kinder zur Stabilität von Bauklotzanordnungen zeigen und welche Unterstützungsmaßnahmen eine Vorstellungsveränderung anregen. In Studie 1 und 2 zeigt sich, dass Kinder in der Schuleingangsphase erste Vorstellungen zur Stabilität von Bauklotzanordnungen haben. Über verschiedene Analysen wurden schwierigkeitsbestimmende Merkmale bzw. lösungsrelevante Dimensionen identifiziert. Kinder mit ca. fünf Jahren orientieren sich eher an der geometrischen Mitte und beziehen somit die Abstandsdimension ein, bei Neunjährigen berücksichtigen hingegen knapp über die Hälfte bereits den Massenmittelpunkt. Folglich reicht die „Bauerfahrung“ von Kindern bis zum neunten Lebensjahr nicht aus, um die Fähigkeit, Bauklotzanordnungen bezüglich ihrer Stabilität zu beurteilen, vollständig zu entwickeln. Deshalb wurde in Studie 3 untersucht, inwieweit sich eine Vorstellungsveränderung zur Stabilität von Bauklotzanordnungen mithilfe verschiedener Unterstützungsmaßnahmen innerhalb einer kurzen Lerneinheit anregen lässt. Dabei wurden verschiedene materiale und verbale Unterstützungsmaßnahmen in Form von Fotos und gezielten sprachlichen Instruktionen in einem systematischen Vergleich gegenübergestellt. Die Ergebnisse weisen nach, dass bereits mit einer kurzen Lerneinheit ein Wissenszuwachs bei Siebenjährigen angeregt werden kann, insbesondere wenn sie durch Fotos und gezielte sprachliche Instruktionen unterstützt werden. Die Ergebnisse sind ein erster Schritt für die Entwicklung eines naturwissenschaftlichen Unterrichts zur Stabilität von Bauklotzanordnungen.

Perfluorocarboxylic acids (PFCA) are substances of anthropogenic origin and have been used for several decades. These compounds are a new class of environmental pollutants. Their high surface activity, thermal stability, amphipathicity and weak intermolecular interactions lead to persistence and bioaccumulation. Therefore, there is a great need for reliable analytical methods for detecting the presence and determination of concentration in both environmental samples and everyday products. GC-MS is a cost-effective alternative and supplement to established LC-MS/MS methods. The greatest challenge in the method development is the derivatization reaction. Many of the previously published derivatization reactions for PFCA are time consuming and require high reaction temperatures or toxic reagents. In the present dissertation, two new derivatization reactions for PFCA have been developed and optimized. The first part of the thesis shows the development and optimization of the reaction with triethylsilanol in water. In addition to optimizing the reaction, classical solid-phase extraction was modified to simplify the sample preparation. In the second part of the work, the reaction products of perfluorooctanoic acid (PFOA) with N,N-dimethylformamide dimethyl acetal (DMF-DMA) and -diethyl acetal (DMF-DEA) were identified. From these measurements, it follows that both DMF-DMA and DMF-DEA in the presence of PFOA form an iminium cation, which leads to salt formation. This PFOA salt react further in the GC injector and a corresponding amine is produced. In the last part of the thesis, an analytical method based on the DMF-DMA reaction was developed. The matrix effects have been described in detail. The method has been successfully applied for three different types of samples: dental floss, textiles and sewage sludge. The results were verified by LC-MS/MS analysis in an external laboratory. The differences between the PFCA values for a spiked sample measured by GC-MS and LC-MS/MS were less than 10%.

Warum kann ich mir nicht vorstellen, meine Haare wachsen zu lassen, insbesondere meine Körperhaare? Diese Frage und das damit verbundene Unbehagen motivierten mich 2016 zur Entwicklung meines Dissertationsprojektes. Die Suche nach einer Antwort führt zu einer Studie, die einen feministisch-phänomenologischen Erfahrungsbegriff zentral setzt. Bedeutsam für die Entwicklung eines solchen Begriffs sind die phänomenologischen Beiträge „Zur poststrukturalistischen Kritik an der Erfahrung im Kontext der feministischen Philosophie“ (Stoller 2005) von Silvia Stoller und „Phänomenologie, Poststrukturalismus und feministische Theorie. Zum Begriff der Erfahrung“ (Alcoff 1997) von Linda Martín Alcoff. Darauf aufbauend verfolgt das Dissertationsprojekt zunächst das Anliegen, Erfahrungen sichtbar zu machen, indem sie veranschaulicht und zur Sprache gebracht werden. Auf diese Weise wird es möglich, Erfahrungen hinterfragen zu können, um anschließend Antworten entwickeln zu können. Demnach beruhen mein Unvermögen, Körperhaare wachsen zu lassen, sowie das damit einhergehende Unbehagen darauf, eine drohende Erfahrung der Fremdheit mir selbst gegenüber abwenden zu wollen. Zu einer solchen Fremderfahrung würde es kommen, wenn ich durch meine Körperhaare damit konfrontiert werde, dass ich mir fremd bin. Jedoch um sich selbst kennenzulernen sind Menschen nach phänomenologischem Verständnis (vgl. Meyer-Drawe 2001: 141-142) auf andere Menschen angewiesen, da sie sich selbst erst durch andere bewusst werden können. Doch stellt es angesichts des gelebten Ideals der Haarlosigkeit (vgl. Labre 2002: 120-122, Strmljan 2018: 406) eine Herausforderung dar, meine drohende Fremderfahrung, aufgrund der Konfrontation mit meinen Körperhaaren, im Kontakt mit anderen Menschen zu überwinden, sodass ich eine solche Fremderfahrung vermeide, indem ich meine Körperhaare entferne. Als Resultat verbleibt mein Unbehagen darüber, dem Ideal der Haarlosigkeit zu entsprechen. Zu einer solchen Antwort gelange ich anhand einer Studie, die folgender Forschungsfrage folgt: Wie erfahren sich Menschen beim Waxing in einem Kosmetikstudio unter den Bedingungen der binären Geschlechterordnung? Dass die Erfahrungen in einem Kosmetikstudio erforscht werden, begründet sich damit, dass in einem solchen der Zugang zu Erfahrungen bei der Entfernung von Körperhaaren möglich wird. Körperhaare zu entfernen ist zwar ein alltäglicher Umgang mit Körpern, jedoch intim und persönlich, sodass ein Zugang schwierig wird. Eine Lösung stellt hierfür ein Kosmetikstudio dar. Als Praktikantin in dem Kosmetikstudio Beautystudio werden mir Erfahrungen beim Waxing – einer kosmetischen Technik der Haarentfernung – zugänglich. Auf solche Weise Daten zu erheben folgt dem ethnographischen Vorgehen der teilnehmenden Beobachtung. Forscher*innen nehmen beobachtend vor Ort teil und erheben Daten, indem sie Notizen, Protokolle und schließlich Studien erstellen. Mittels eines solchen Forschungsstils können Forscher*innen Erfahrungen in einer Studie zentral setzen, da sie so Erfahrungen selbst machen können und Zugang zu den Erfahrungen anderer erhalten (vgl. Amann/ Hirschauer 1997: 29-30, Breidenstein et al. 2013: 86-87, 103, 177-178). Im Zuge der Datenerhebung zeigt sich wiederum, dass im Umgang mit Körperhaaren die Bedingungen der binären Geschlechterordnung wirksam werden. Beispielsweise wird in vielen Situationen die dichotome Differenz zwischen Männern und Frauen betont, ohne dass es konkret für die kosmetische Anwendung notwendig zu sein scheint. So erklärt sich, dass für die Analyse und das Hinterfragen der zur Sprache gebrachten Erfahrungen ein geschlechtertheoretisches Konzept herangezogen wird, welches Erfahrungen hinsichtlich der Bedingungen der binären Geschlechterordnung befragen kann. Eine solche Betrachtung der Daten bietet Gesa Lindemanns Konzept „Der leiblich-affektiven Konstruktion des Geschlechts“ (1992). Basierend auf dem feministisch-phänomenologischen Erfahrungsbegriff, dem ethnographischen Vorgehen und dem Geschlechterkonzept Lindemann zeigt sich, dass Menschen beim Waxing erfahren (können), mit anderen Menschen verbunden und sich selbst unverbunden zu sein. Dabei wird die Haut zum Kristallisationspunkt der Verbindung zu anderen Menschen (und auch Apparaten). Durch die Berührungen wird einerseits Verbundenheit gestaltet und eine gegenseitige Zuwendung erfahrbar, andererseits wird diese aber auch unterbrochen, wenn durch das Waxing Schmerz zugefügt wird oder Menschen durch Blicke entblößt werden. So wird die Haut zum Medium zwischen den Erfahrungen der Verbundenheit und Unverbundenheit. (Hinweisen möchte ich an dieser Stelle, dass alle Namen und Orte anonymisiert sind. Demnach handelt es sich beim Beautystudio um den anonymisierten Namen des Kosmetikstudios, in welchem ich forschte. Auf diese Weise soll die Persönlichkeit der Kontaktpersonen im Feld gewahrt bleiben.) Literaturhinweise: Alcoff, Linda M. (1997): Phänomenologie, Poststrukturalismus und feministische Theorie. Zum Begriff der Erfahrung. In: Stoller, Silvia/ Vetter, Helmuth (Hg.): Phänomenologie und Geschlechterdifferenz. Wien: WUV-Universitäts-Verlag: 227-271. Amann, Klaus/ Hirschauer, Stefan (1997): Die Befremdung der eigenen Kultur. Ein Programm. In: Hirschauer, Stefan/ Amann, Klaus (Hg.): Die Befremdung der eigenen Kultur: Zur ethnographischen Herausforderung soziologischer Empirie. Frankfurt am Main: Suhrkamp Verlag: 7-52. Breidenstein, Georg/ Hirschauer, Stefan/ Kalthoff, Stefan/ Nieswand, Boris (2013): Ethnografie. Die Praxis der Feldforschung. Konstanz & München: UVK Verlagsgesellschaft Labre Peixoto, Magdala (2002): The Brazilian Wax: New Hairlessness Norm for Women? In: Journal of Communication Inquiry: 26 (2): 113-132. Lindemann, Gesa (1992): Die leiblich-affektive Konstruktion des Geschlechts. Für eine Mikrosoziologie des Geschlechts unter der Haut. In: Zeitschrift für Soziologie: 21 (5): 330-346. Meyer-Drawe, Käte (2001): Leiblichkeit und Sozialität. München: Wilhelm Fink Verlag. Stoller, Silvia (2005): Zur poststrukturalistischen Kritik an der Erfahrung im Kontext der feministischen Philosophie. In: Stoller, Silvia/ Vasterling, Veronica/ Fisher, Linda (Hg.): Feministische Phänomenologie und Hermeneutik. Würzburg: Königshausen & Neumann GmbH: 139-170. Strmljan, Alina (2018): Haare zum Schämen? Weibliche Körperbehaarung und ihre Entfernung – Normen, Tabus und Trivialisierungen. In: Breuss, Susanne (Hg.): Mit Haut und Haar. Frisieren, Rasieren, Verschönern. Wien: Metroverlag: 404-410.

Neue Forschungen zu den von Altdorf genannt Wollschläger.

Purpose: The present research aims on the one hand to provide a basic understanding of the challenges that young companies in growth face by discussing previous findings on this topic. On the other hand, this research project wants to generate new insights on specific challenges and possible learning processes by means of a theory-based examination of a case study. Design/Methodology/Approach: The author of this study conducts a theory-based case study investigation. The study is based on two theoretical concepts which depict the phenomenon of challenges faced by young companies in growth in an abstract form: On the one hand, the "Tension-Balancing Management" according to Harald von Korflesch, which expresses the fundamental tension within entrepreneurial organizations, which in turn can be seen as a starting point for actual challenges. On the other hand, the "Tipping Points / Absorbative Capacities" framework by Phelps and colleagues, which links challenges (Tipping Points) that young companies will experience during their lifetime with required capabilities (Absorbative Capacities). Guided by these theories, rich data from interviews, observations and documents from the case are collected and analyzed in order to generate insights. Findings: On the one hand, challenges of young growing companies can be described on a superordinate level with the help of the two theoretical concepts. On the other hand, the analysis also shows that, above all, a fine-grained, individual approach is needed to adequately depict challenges and learning processes. Research Limitations: The main limitation of the present study is the single-case design. The fact that only one specific case was examined means that the insights gained from this cannot be automatically replicated to comparable cases. The simultaneous examination of multiple cases could thus make the results more stable. Originality/Value: The qualitative investigation of growth-related challenges by means of a specific case study creates an in-depth and profound understanding of complex interactions in the growth of young companies. In addition, the assumptions of both theoretical concepts are tested on a real case, thus enabling theoretical and practical implications to be identified.

Even with moderate pulse energies and average powers, ultrashort pulse lasers achieve very high peak powers, whose effect on matter is fundamentally different from that of other light sources. The high electric field strength does not only cause an increase of optically nonlinear effects such as second harmonic generation, but it is also responsible for the “cold“ ablation, which leads to colder plasmas. An investigation of these two circumstances in terms of a simplification of the pulse duration measurement and an improvement of the molecular formation in cooling plasmas is the topic of this work. In this context, it is shown that when selecting suitable process parameters, especially when purposefully defocusing the medium, the use of ultrashort pulse lasers improves the spectroscopy of several emitting molecules such as aluminum oxide. Therefore, their detection is possible even without the time-resolving spectrometers required in literature. In addition, ultrashort pulses enable spatially resolved crystallization of zinc oxide on zinc surfaces prepared by basic means. The resulting wurtzites usually align their c-axis approximately perpendicular to the underlying surface and can be used to generate scattered second harmonics. Fiber-based femtosecond lasers with pulse energies in the microjoule range, pulse durations of a few 100fs and very low maintenance requirements have proven to be a powerful instrument for these purposes. For measuring the pulse duration, the high pulse energy also enables the usage of frequency doublers with much lower conversion eciencies. Despite nonuniform crystal axes, the scattering second harmonic generating aluminum nitride has proven to be particularly suitable for optical autocorrelation. Compared to the commonly used monocrystalline beta-barium borate, the sintered aluminum nitride ceramic plates facilitate the adjustment, simplify the material handling and reduce the expenses by two to three orders of magnitude. The method developed in this work is therefore also suitable for confirmatory measurements of the pulse duration during the production process of such systems – especially when the occurring pulse energies are high or rather too high for beta-barium borate.

The history of human kind is characterized by social conflict. Every conflict can be the starting point of social change or the escalation into more destructive forms. The social conflict in regard to rising numbers of refugees and their acceptance that arose in most host countries in 2015 already took on destructive forms – in Germany, right-wing extremists attacked refugee shelters and even killed multiple people, including political leaders who openly supported refugees. Thus, incompatible expectancies and values of different parts of the society led to violent action tendencies, which tremendously threaten intergroup relations. Psychological research has developed several interventions in past decades to improve intergroup relations, but they fall short, for example, when it comes to the inclusion of people with extreme attitudes and to precisely differentiate potential prosocial outcomes of the interventions. Thus, this dissertation aimed to a) develop psychological interventions, that could also be applied to people with more extreme attitudes, thereby putting a special emphasis on collecting a diverse sample; b) gain knowledge about target- and outcome specific effects: Who benefits from which intervention and how can specific prosocial actions be predicted in order to develop interventions that guide needs-based actions; and c) shed light on potential underlying mechanisms of the interventions. The dissertation will be introduced by the socio-political background that motivated the line of research pursued, before providing an overview of the conceptualization of social conflicts and potential psychological inhibitors and catalyzers for conflict transformation. Based on past research on socio-psychological interventions and their limitations, the aims of the dissertation will be presented in more detail, followed by a short summary of each manuscript. Overall, the present thesis comprises four manuscripts that were summarized in the general discussion into a road map for social-psychological interventions to put them into a broader perspective. The road map aspires to provide recommendations for increasing – either approach-oriented or support-oriented actions – by the socio-psychological interventions for a variety of host society groups depending on their pre-existing attitude towards refugees. A Paradoxical Intervention targeting central beliefs of people with negative attitudes towards refugees influenced inhibitory and catalyzing factors for conflict transformation over the course of three experiments – thereby providing an effective tool to establish approach-oriented action tendencies, such as the willingness to get in contact with refugees. Further, the dissertation presents a novel mechanism – namely Cognitive Flexibility – which could explain the Paradoxical Interventions’ effect of past research. By positively affecting a context-free mindset, the Paradoxical Intervention could impact more flexible thought processes in general, irrespective of the topic tackled in the Paradoxical Intervention itself. For people with rather positive attitudes addressing emotions may increase specific support-oriented action tendencies. The dissertation provides evidence of a positive relation between moral outrage and hierarchy-challenging actions, such as solidarity-based collective action, and sympathy with prosocial hierarchy-maintaining support-oriented actions, such as dependency-oriented helping. These exclusive relations between specific emotions and action intentions provide important implications for the theorizing of emotion-behavior relations, as well as for practical considerations. In addition, a diversity workshop conducted with future diplomats showed indirect effects on solidarity-based collective action via diversity perception and superordinate group identification, thereby extending past research by including action intentions and going beyond the focus on grassroot-initiatives by presenting an implementable intervention for future leaders in a real world context. Taken together, this dissertation provides important insights for the development of socio-psychological interventions. By integrating a diverse sample, including members of institutions on meso- and macro-levels (non-governmental organizations and future politicians) of our society, this dissertation presents a unique multi-perspective of host society members on the social conflict of refugee acceptance and support. Thereby, this work contributes to theoretical and practical advancement of how social psychology can contribute not only to negative peace – by for example (indirectly) reducing support of violence against refugees – but also to positive peace – by for example investigating precursors of hierarchy-challenging actions that enable equal rights.

Interest in crowdfunding has been increasing in recent years, both from the economy and the scientific community. Besides artists and entrepreneurs, researchers are now also funding their projects through many small contributions from the crowd. However, the perceived use in Germany does not reflect the benefits of a crowdfunding campaign, especially in international comparison. This study investigates this issue by identifying the motives and barriers for crowdfunding in order to formulate recommendations for research institutions to encourage the use of crowdfunding. By means of a literature review, first insights are gained which are then used to conduct qualitative interviews with eleven researchers who successfully completed a crowdfunding campaign. The results indicate that researchers in Germany use crowdfunding primarily to raise awareness for the subject and the scientific community in general. The initial assumption of the speed of crowdfunding as a motive was contradicted by the experts. The major barriers are the immense effort involved in a campaign and the lack of reputation for the concept of crowdfunding by German scientists. In addition, only subjects and projects with a high public relevance and funding volume of up to five digits are recommended for crowdfunding. Furthermore, the public exposure of the experts during the campaign was identified as an additional barrier. These findings lead to three recommendations for research institutions to increase the use of crowdfunding: Firstly, universities should raise awareness for the subject of crowdfunding as an additional form of research funding and highlight the benefits of a crowdfunding campaign. Secondly, universities should cooperate with crowdfunding partners and utilize the networking capacities of a university. Lastly, universities should provide support to distribute the workload among interdisciplinary teams in order to enhance the effortreturn ratio of a crowdfunding campaign. The chosen methodology and the scope of the thesis enable further research that might examine the perspective of the universities and the conditions in other countries. In addition, a largescale quantitative survey is required to validate the identified concepts statistically.

Das Sündenverständnis Søren Kierkegaards anhand seiner Werke „Die Krankheit zum Tode“ und „Der Begriff Angst“.

Die Studien der vorliegenden Arbeit untersuchen geschlechtsspezifisch-emotionale Reaktionsmuster auf stärkere und weniger stark emotionalisierte Texte verschiedener Textarten zu negativen Themen. Zusätzlich finden verschiedene Ausprägungen von Geschlechterstereotypen und dahingehend mögliche Zusammenhänge mit emotionalen Reaktionen Berücksichtigung. Versuchspersonen wurden mit Textmaterial konfrontiert und sollten daraufhin mit Hilfe des Emotionsfragebogens M-DAS ihre emotionalen Reaktionen bewerten. Frauen zeigten eine stärkere Ergriffenheit in Bezug auf das Textmaterial im Allgemeinen und besonders auf emotionalisiertes Textmaterial. Gemischte Ergebnisse zeigten sich in Bezug auf geschlechtertypische Textarten. Eine Sachtextpräferenz der Männer ließ sich ebensowenig signifikant belegen wie die erwartete stärkere Vorliebe der Frauen für literarische Texte. Geschlechtsspezifische Emotionen wurden weitestgehend erwartungskonform berichtet: Frauen reagierten mit stärkerer Angst und Trauer auf das Textmaterial, Männer mit stärkerer Verachtung. Die Ergebnisse in Bezug auf Wut sind gemischt, in einigen Fällen wurde Wut jedoch stärker von den Frauen berichtet. Die Untersuchung der Zusammenhänge zwischen internalisierten Stereotypen ergab Einflüsse hauptsächlich von weiblichen Stereotypen auf emotionale Reaktionen, männliche Stereotype konnten nur in einer Teilfragestellung als Einflussfaktor ausgemacht werden. Emotionsbezogene Stereotype wiesen keine Zusammenhänge mit emotionalen Reaktionen auf. Insgesamt belegen die Ergebnisse der Arbeit, dass sich geschlechterspezifische Unterschiede in emotionalen Reaktionen finden lassen.

Die Forschungsarbeit beschäftigt sich mit der zentralen Frage, welche Erfolgsfaktoren einen Effekt auf eine erfolgreiche Crowdfunding Kampagne haben. Als Untersuchungsfeld stehen deutsche Startup-Unternehmen im Fokus, die bereits erfolgreiche CrowdfundingKampagnen durchgeführt haben. Zur Beantwortung dieser Frage wird zunächst eine systematische Literaturanalyse durchgeführt, durch die relevante Erfolgsfaktoren für eine Crowdfunding-Kampagne ermittelt werden. Diese Faktoren werden anschließend einem Mixed-Method-Ansatz unterzogen, bei dem qualitative Ergebnisse, basierend auf einer Fallstudienforschung, mit den statistisch ausgewerteten quantitativen Ergebnissen aus der Fragebogenforschung verglichen und überprüft werden. Dabei liegt der Fokus insbesondere auf der Identifikation von signifikanten Wirkungszusammenhängen zwischen den Erfolgsfaktoren und einer erfolgreichen Crowdfunding-Kampagne. Im Ergebnis konnten diesbezüglich Wirkungszusammenhänge innerhalb dieser Thesis nachgewiesen werden. Sechs der festgestellten Zusammenhänge aus der qualitativen Analyse werden durch die quantitative Analyse bestätigt. Es konnte jedoch keine Signifikanz der Korrelationen festgestellt werden. Auch die Hypothese, dass sich die Erfolgsaussichten einer Kampagne durch eine höhere Anzahl jeweils kombinierter Erfolgsfaktoren erhöhen, wurde sowohl in der qualitativen als auch in der quantitativen Betrachtung widerlegt. Demnach galt es für den Autor der vorliegenden Thesis künftige Forschungsfelder zu definieren, die die ermittelten Ergebnisse erweitern und konkretisieren. Es bleibt beispielsweise einer weiterführenden Forschung überlassen, zu klären, ob bestimmte Kombinationen der Erfolgsfaktoren zu signifikanten Wirkungszusammenhängen führen. Darüber hinaus bietet sich eine weiterführende statistische Regressionsanalyse an, um die kausalen Effekte zu untersuchen und Prognosen für erfolgreiche Crowdfunding-Kampagnen zu formulieren.

In dieser Arbeit wird der Frage nachgegangen, wie beispielsweise die homosexuelle AfD-Frontfrau Alice Weidel ihre Mitgliedschaft in einer Partei, die als konservativ und homophob gilt, begründet. Neben der Rede ihres Coming-Outs wird außerdem das Parteiprogramm der AfD hinsichtlich der Themen Homosexualität und Migration analysiert.

Stream ecosystems are one of the most threatened ecosystems worldwide due to their exposure to diverse anthropogenic stressors. Pesticides appear to be the most relevant stressor for agricultural streams. Due to the current mismatch of modelled and measured pesticide concentrations, monitoring is necessary to inform risk assessment or improve future pesticide approvals. Knowing if biotic stress responses are similar across large scales and long time frames could ultimately help in estimating protective stressor thresholds. This thesis starts with an overview of entry pathways of pesticides to streams as well as the framework of current pesticide monitoring and gives an outline of the objectives of the thesis. In chapter 2, routine monitoring data based on grab sampling from several countries is analysed to identify the most frequently occurring pesticide mixtures. These mixtures are comprised of relatively low numbers of pesticides, of which herbicides are dominating. The detected pesticide mixtures differ between regions and countries, due to differences in the spectrum of analysed compounds and limits of quantification. Current routine monitoring does not include sampling during pesticide peaks associated with heavy rainfall events which likely influences the detected pesticide mixtures. In chapter 3, sampling rates of 42 organic pesticides for passive sampling are provided together with recommendations for the monitoring of field-relevant peaks. Using this information, in chapter 4 a pesticide gradient is established in an Eastern European region where agricultural intensity adjacent to sampled streams ranges from low to high. In contrast to current routine monitoring, rainfall events were sampled and a magnitude of pesticides were analysed. This led to the simultaneous detection of numerous pesticides of which one to three drive the pesticide toxicity. The toxicity, however, showed no relationship to the agricultural intensity. Using microcosms, the stress responses of fungal communities, the hyphomycetes, and the related ecosystem function of leaf decomposition, is investigated in chapter 5. Effects of a field-relevant fungicide mixture are examined across three biogeographical regions for three consecutive cycles of microbial leaf colonisation and decomposition. Despite different initial communities, stress responses as well as recoveries were similar across biogeographical regions, indicating a general pattern. Overall, this thesis contributes to an improved understanding of occurrence and concentrations of pesticides mixtures in streams, their monitoring and impact on an ecosystem function. We showed that estimated pesticide toxicities reach levels that affect non-target organisms and thereby potentially whole ecosystems. Routine monitoring, however, likely underestimates the threat by pesticides. Effects leading to a loss in biodiversity or functions in streams ecosystems can be reduced by reassessing approved pesticides with ongoing targeted monitoring and increased knowledge of effects caused by these pesticides.

The three biodegradable polymers polylactic acid (PLA), polyhydroxybutyrate (PHB) and polybutylene adipate terephthalate (PBAT) were coated with hydrogenated amorphous carbon layers (a-C:H) in the context of this thesis. A direct alignment of the sample surface to the source was chosen, resulting in the deposition of a robust, r-type a-C:H. At the same time, a partly covered silicon wafer was placed together with the polymers in the coating chamber and was coated. Silicon is a hard material and serves as a reference for the applied layers. Due to the hardness of the material, no mixed phase occurs between the substrate and the applied layer (no interlayer formation). In addition, the thickness of the applied layer can be estimated with the help of the silicon sample. The deposition of the layer was realized by radio frequency plasma enhanced chemical vapor deposition (RF-PECVD). For the coating the samples were pre-treated with an oxygen plasma. Acetylene was used as precursor gas for the plasma coating. Coatings with increasing thickness in 50 nm steps from 0-500 nm were realised. The surface analysis was performed using several techniques: The morphology and layer stability were analyzed with scanning electron microscopy (SEM) measurements. The wettability was determined by contact angle technique. In addition, the contact angles provide macroscopic information about the bond types of the carbon atoms present on the surface. For microscopic analysis of the chemical composition of the sample and layer surfaces, diffuse reflectance Fourier transform infrared spectroscopy (DRIFT) as well as synchrotron based X-ray photon spectroscopy (XPS) and near edge X-ray absorption fine structure spectroscopy (NEXAFS) were used. All coated polymers showed several cases of layer failure due to internal stress in the layers. However, these were at different layer thicknesses, so there was a substrate effect. In addition, it is visible in the SEM images that the coatings of PLA and PHB can cause the applied layer to wave, the so-called cord buckling. This does not occur with polymer PBAT, which indicates a possible better bonding of the layer to the polymer. The chemical analyses of the layer surfaces show for each material a layer thickness dependent ratio of sp² to sp³ bonds of carbon, which alternately dominate the layer. In all polymers, the sp³ bond initially dominates, but the sp² to sp³ ratio changes at different intervals. Although the polymers were coated in the same plasma, i.e. the respective layer thicknesses (50 nm, 100 nm, ...) were applied in the same plasma process, the respective systems differed considerably from each other. A substrate effect is therefore demonstrably present. In addition, it was found that a change in the dominant bond from sp³ to sp² is an indication ofan upcoming layer failure of the a-C:H layer deposited on the polymer. In the case of PLA, this occurs immediately with change to sp² as the dominant bond; in the case of PHB and PBAT, this occurs with different delay to increased layer thicknesses (at PHB 100 nm, at PBAT approx. 200 nm. Overall, this thesis shows that there is a substrate effect in the coating of the biodegradable polymers PLA, PHB and PBAT, since despite the same coating there is a different chemical composition of the surface at the respective layer thicknesses. In addition, a layer failure can be predicted by analyzing the existing bond.

Data-minimization and fairness are fundamental data protection requirements to avoid privacy threats and discrimination. Violations of data protection requirements often result from: First, conflicts between security, data-minimization and fairness requirements. Second, data protection requirements for the organizational and technical aspects of a system that are currently dealt with separately, giving rise to misconceptions and errors. Third, hidden data correlations that might lead to influence biases against protected characteristics of individuals such as ethnicity in decision-making software. For the effective assurance of data protection needs, it is important to avoid sources of violations right from the design modeling phase. However, a model-based approach that addresses the issues above is missing. To handle the issues above, this thesis introduces a model-based methodology called MoPrivFair (Model-based Privacy & Fairness). MoPrivFair comprises three sub-frameworks: First, a framework that extends the SecBPMN2 approach to allow detecting conflicts between security, data-minimization and fairness requirements. Second, a framework for enforcing an integrated data-protection management throughout the development process based on a business processes model (i.e., SecBPMN2 model) and a software architecture model (i.e., UMLsec model) annotated with data protection requirements while establishing traceability. Third, the UML extension UMLfair to support individual fairness analysis and reporting discriminatory behaviors. Each of the proposed frameworks is supported by automated tool support. We validated the applicability and usability of our conflict detection technique based on a health care management case study, and an experimental user study, respectively. Based on an air traffic management case study, we reported on the applicability of our technique for enforcing an integrated data-protection management. We validated the applicability of our individual fairness analysis technique using three case studies featuring a school management system, a delivery management system and a loan management system. The results show a promising outlook on the applicability of our proposed frameworks in real-world settings.

Amphibian populations are declining worldwide for multiple reasons such as habitat destruction and climate change. An example for an endangered European amphibian is the yellow-bellied toad Bombina variegata. Populations have been declining for decades, particularly at the northern and western range margin. One of the extant northern range centres is the Westerwald region in Rhineland-Palatinate, Germany. To implement informed conservation activities on this threatened species, knowledge of its life-history strategy is crucial. This study therefore focused on different developmental stages to test predictions of life-history theory. It addressed (1) developmental, (2) demographic and (3) genetic issues of Bombina variegata as a model organism: (1) Carry-over effects from larval environment to terrestrial stages and associated vulnerability to predators were investigated using mesocosm approaches, fitness tests and predation trials. (2) The dynamics and demography of B. variegata populations were studied applying a capture-mark-recapture analysis and skeletochronology. The study was complemented through (3) an analysis of genetic diversity and structuring of B. variegata populations using 10 microsatellite loci. In order to reveal general patterns and characteristics among B. variegata populations, the study focused on three geographical scales: local (i.e. a former military training area), regional (i.e. the Westerwald region) and continental scale (i.e. the geographical range of B. variegata). The study revealed carry-over effects of larval environment on metamorph phenotype and behaviour causing variation in fitness in the early terrestrial stage of B. variegata. Metamorph size and condition are crucial factors for survival, as small-sized individuals were particularly prone to predator attacks. Yellow-bellied toads show a remarkable fast-slow continuum of the life-history trait longevity. A populations’ position within this continuum may be determined by local environmental stochasticity, i.e. an extrinsic source of variation, and the efficiency of chemical antipredator protection, i.e. an intrinsic source of variation. Extreme longevity seems to be an exception in B. variegata. Senescence was absent in this study. Weather variability affected reproductive success and thus population dynamics. The dispersal potential was low and short-term fragmentation of populations caused significant genetic differentiation at the local scale. Long-term isolation resulted in increased genetic distance at the regional scale. At the continental scale, populations inhabiting the marginal regions were deeply structured with reduced allelic richness. As consequence of environmental changes, short-lived and isolated B. variegata populations at the range margin may face an increased risk of extinction. Conservation measures should thus improve the connectivity among local populations and reinforce annual reproductive success. Further research on the intraspecific variation in B. variegata skin toxins is required to reveal potential effects on palatability and thus longevity.

In dieser wiederkehrenden Zeitschriftenreihe wollen wir die Arbeit junger Wissenschaftlerinnen und Wissenschaftler an der Universität Koblenz-Landau kommunizieren und Studierenden Austausch- und Publikationsmöglichkeiten für den wissenschaftlichen Werdegang eröffnen. In dieser Ausgabe: Exner, Maik. Bedeutung und Musik: Konstitutionsprozesse von musikkulturellen Bedeutungen und Bedeutsamkeiten in interaktionaler, biographischer und historischer Perspektive. Henne, Arthur. Analysis of the Transition from Traditional Closed Innovation Systems to Open Innovation. von Schönebeck, Sandra. #TrauDichDeutschland: Die Sprache der AfD im multimodalen (Online-) Bundestagswahlkampf 2017 – Eine Untersuchung sprachlicher und visueller Strategien sowie der Reaktionen potenzieller Wählerinnen und Wähler. Michaelis, Kent. Das “Templerhaus” in Boppard: Kunsthistorische Untersuchung eines spätromanischen Baudenkmals. Koops, Sarah M. J.. Lässt sich eine Obergrenze für die Aufnahme von Flüchtlingen durch Nationalstaaten ethisch rechtfertigen?. Rosemann, Raphaela S.. Masquerade and Disguise in the Works of Eliza Haywood.

Satzung für den steuerbegünstigten Betrieb gewerblicher Art: Kinderbetreuungseinrichtungen Redaktionelle Korrektur betreffend die Dritte Ordnung zur Änderung der Ordnung für die Prüfung im Bachelorstudiengang und im Masterstudiengang Erziehungswissenschaft an der Universität Koblenz-Landau, Campus Landau Ordnung zur Änderung der Beitragsordnung des Studierendenwerks Koblenz Siebte Ordnung zur Änderung der Prüfungsordnung für den Bachelorstudiengang und den Masterstudiengang „Sozial- und Kommunikationswissenschaften“ des Fachbereichs 6: Kultur- und Sozialwissenschaften an der Universität Koblenz-Landau Sechsundzwanzigste Ordnung zur Änderung der Prüfungsordnung für die Prüfung im lehramtsbezogenen Bachelorstudiengang an der Universität Koblenz-Landau

The maintenance strategy “predictive maintenance”, which is characterized by predicting the failure behavior of technical units based on modern sensor technology, plays a key role in smart factories against the background of an industry 4.0. This paper contains an evaluation of the current state of research on this strategy and gives an overview of the areas of application to date. With the aid of a qualitative video analysis, the implementation in the industries and company divisions involved and the type of goods monitored are examined. The analyzed video clips were uploaded to YouTube for example for marketing purposes by various companies with different perspectives on predictive maintenance. The video analysis was realized by applying a previously defined coding plan to the video material. The results show a predominant application in the manufacturing industry, in which predictive maintenance is used to monitor plants and machines. In addition, the strategy is also mainly applied to means of transport used for freight and passenger transport in various infrastructures. As a result of the video analysis, the currently high need for explanation of predictive maintenance becomes visible. By looking at these explanations, one also learns something about the special features that distinguish it from other maintenance strategies.

Accidents annually cause high economic damages for concerned persons, companies and the state. To determine the exact costs of a damage is a challenge. Scientific studies differ from each other because of different models of calculation. Due to the fact of a low number of accidents concerning rail transport there are not many studies about how to calculate the costs an accident causes. The aim of this thesis is to give an overview about methods when dealing with these costs and to point out occurring difficulties. Generally, costs of accident can be divided in two categories. One category deals with personal injuries whereas the other focuses on material damages. Personal injuries contain material and immaterial damages. This leads to difficulties in calculation. The main aspect when dealing with personal damages is the loss of manpower, the costs of medical supply and the costs of the recovery of the legal situation. Currently there is no model of how to calculate personal damages concerning rail transport in Germany. The “Bundesamt für Straßenverkehr” developed an extensive model for calculations of costs of accident concerning traffic. It turned out that the death of people has costs round about 1.1 million euro. Severely and slightly injured people cause damages about 106,000 euro and 5,000 euro. This thesis declares that the model is important regarding different aspects of rail transport and that it is based on statistically collected key performance indicators. Furthermore, some approaches, which analyse the value of life, are mentioned. There are large derivations between them. To make a calculation of material damage the current value of the object must be respected. When dealing with the limitation of material damages the focus is on damages concerning infrastructure. In addition, railway infrastructure can be mentioned. With the help of the “Kostenkennwertekatalog” of Deutsche Bahn AG acquisitions costs for certain components of infrastructure can be determined. As a result, they offer a basis for calculating damages.

In this bachelor thesis a database for worldwide railway national investigation bodies is created. It contains contact details of those authorities as well as information of public accident investigation reports. The database is intended to serve as a basis for information and data acquisition of railway accidents. The information that can be taken from the investigation reports is an important element for a possible economical evaluation and for the efficiency of safety technologies. Besides the basics of the national investigation bodies, accident investigation reports and the efficiency calculation of safety technologies the thesis presents an evaluation of the existing investigation bodies and reports in the database. Also the usefulness of the database of accident investigation bodies will be explained and the potential impact on railway safety will be examined.

Microbial pollution of surface waters poses substantial risks for public health, amongst others during recreational use. Microbial pollution was studied at selected sampling sites in rivers Rhine, Moselle and Lahn (Germany) on the basis of commonly used fecal indicator organisms (FIO) indicating bacterial (Escherichia coli, intestinal enterococci) and viral (somatic coliphages) fecal contamination. In addition, blaCTX-Mantibiotic resistance genes (ARG) were quantified at twosites in river Lahn and were used as markers for tracking the spread of antibiotic resistance in the aquatic environment. The impact of changes in climate-related parameters on FIO was examined by studying monitoring results of contrasting flow conditions at rivers Rhine and Moselle. Analyses at all studied river sites clearly indicate that high discharge and precipitation enhance the influx of FIO, ARG and thus potentially (antibiotic resistant) pathogens into rivers. In contrast, a decrease in hygienic microbial pollution was observed under high solar irradiation and increasing water temperatures. Based on identified contributing key factors, multiple linear regression (MLR) models for five sites at a stretch of river Lahn were established that allow a timely assessment of fecal indicator abundances. An interaction between abiotic and biotic factors (i.e. enhanced grazing pressure) considerably contributed to the formation of seasonal patterns among FIO abundances. This was enhanced during extraordinary low flow conditions in rivers with pronounced trophic interactions, clearly hampering a transfer of model approaches between rivers of different biological and hydrological characteristics. Bacterial indicatorswere stronger influenced by grazing pressure than phages. Hence, bacterial indicators alone do not sufficiently describe viral pollution in rivers. BlaCTX-Mgenes were omnipresent in Lahn River water and corresponded to distribution patterns of FIO, indicating fecal sources. Agriculture and waste watertreatment plant effluents contributed to ARG loads and participants in non-bathing water sports were found to be at risk of ingesting antibiotic resistant bacteria (ARB) including ARG, bearing the risk of infection or colonization. Results of the present study highlight the need to be aware of such risks not only in designated bathing waters. ARG abundance at both riverine sampling sites could largely be explained by E. coliabundance and may thus also be incorporated into multiple regression models using E. colispecific environmental predictors. It can be expected that the frequency of short-term microbial pollution events will increase over the next decades due to climate change. Several challenges were identified with regard to the implementation of early warning systems to protect the public from exposure to pathogens in rivers. Most importantly, the concept of the Bathing Water Directive (Directive 2006/7/EC) itself as well as the lack of harmonization in the regulatory framework at European Union (EU) level are major drawbacks and require future adjustments to reliably manage health risks related to microbial water pollution in waters used in multifunctional ways.

This dissertation presents the application of the molecular LIBS method, a novelapproach of Laser-Induced Breakdown Spectroscopy (LIBS), to optimize the detection of pitting chlorides in concrete structures, which are e.g. contaminated bydeicing salt in winter. Potentiometric titration as the standard method for chloride determination in building material analysis is costly and time-consuming. Ithas the decisive disadvantage that the determination of chloride concentrationis based on the total mass of the concrete and not on the cement content asrequired by the European standard EN 206. The imaging capabilities of LIBS forphase separation of the concrete meet this requirement. LIBS was already usedby BAM in 1998 in building material analysis, but the detection of chlorides withLIBS requires expensive helium purging and spectrometers outside the visiblespectral range to detect emissions of atomic chlorine. The approach of molecular LIBS is to quantify the emission of chloride-containing molecular radicalsformed during the cooling phase of the laser-induced plasma. The advantagescompared to conventional LIBS method are the emission in the visible spectralrange and the applicability without noble gas purging. In this thesis the influenceof the experimental components on the time behaviour of the relevant molecularemission bands is investigated, signal deviations due to plasma fluctuations aresignificantly reduced and for plasma analysis the molecular formation is simulated on atomistic scales and compared with standard methods. In simultaneousmeasurements, atomic and molecular Cl emission are directly compared and the quantification is optimized by data combination. Molecular LIBS will be extended to a quantifying and imaging method that can detect chlorides withoutnoble gas purging.

The industry standard Decision Model and Notation (DMN) has enabled a new way for the formalization of business rules since 2015. Here, rules are modeled in so-called decision tables, which are defined by input columns and output columns. Furthermore, decisions are arranged in a graph-like structure (DRD level), which creates dependencies between them. With a given input, the decisions now can be requested by appropriate systems. Thereby, activated rules produce output for future use. However, modeling mistakes produces erroneous models, which can occur in the decision tables as well as at the DRD level. According to the Design Science Research Methodology, this thesis introduces an implementation of a verification prototype for the detection and resolution of these errors while the modeling phase. Therefore, presented basics provide the needed theoretical foundation for the development of the tool. This thesis further presents the architecture of the tool and the implemented verification capabilities. Finally, the created prototype is evaluated.

Regarding the rising amount of legal regulations, businesses should get the opportunity to use software to fulfill their Compliance Management with the usage of compliance pattern. These patterns are used to represent substantive and structural parts of the processes. This means companies can increase their efficiency and react to new regulations quickly to avoid possible violation which can lead to monetary losses or legal consequences. In the literature are many approaches that deal with compliance pattern but currently there does not exist any list with necessary compliance pattern that companies should face at (Delfmann and Hübers, 2015). The following bachelor thesis classifies 80 research contributions regarding their different approaches of compliance pattern. For that a systematic literature review was executed. As a result, the author developed a graphical classification context that provides an overview of connections between different compliance approaches. Furthermore, an appendix with 32 compliance patterns of the analyzed papers was developed that contains real-world patterns with the classification of the previous sections.

Because silver nanoparticles (Ag NPs) are broadly applied in consumer products, their leaching will result in the continuous release of Ag NPs into the natural aquatic environment. Therefore, bacterial biofilms, as the prominent life form of microorganisms in the aquatic environment, are most likely confronted with Ag NPs as a pollutant stressor. Notwithstanding the significant ecological relevance of bacterial biofilms in aquatic systems, and though Ag NPs are expected to accumulate within these biofilms in the environment, the knowledge on the environmental and ecological impact of Ag NPs, is still lagging behind the industrial growth of nanotechnology. Consequently, aim of this thesis was to perform effect assessment of Ag NP exposure on bacterial biofilms with ambient Ag NPs concentrations and under environmentally relevant conditions. Therefore, a comprehensive set of methods was applied in this work to study if and how Ag NPs of two different sizes (30 and 70 nm) affect bacterial biofilms i.e. both monospecies biofilms and freshwater biofilms in environmentally relevant concentrations (600 - 2400 µg l-1). Within the first part of this work, a newly developed assay to test the mechanical stability of monospecies biofilms of the freshwater model bacterium Aquabacterium citratiphilum was validated. In the first study, to investigate the impact of Ag NPs on the mechanical stability of bacterial biofilms, sublethal effects on the mechanical stability of the biofilms were observed with negative implications for biostabilization. Furthermore, as it is still challenging to monitor the ecotoxicity of Ag NPs in natural freshwater environments, a mesocosm study was performed in this work to provide the possibility for the detailed investigation of effects of Ag NPs on freshwater biofilms under realistic environmental conditions. By applying several approaches to analyze biofilms as a whole in response to Ag NP treatment, insights into the resilience of bacterial freshwater biofilms were obtained. However, as revealed by t-RFLP fingerprinting combined with phylogenetic studies based on the 16S gene, a shift in the bacterial community composition, where Ag NP-sensitive bacteria were replaced by more Ag NP-tolerant species with enhanced adaptability towards Ag NP stress was determined. This shift within the bacterial community may be associated with potential detrimental effects on the functioning of these biofilms with respect to nutrient loads, transformation and/or degradation of pollutants, and biostabilization. Overall, bringing together the key findings of this thesis, 4 general effect mechanisms of Ag NP treatment have been identified, which can be extrapolated to natural freshwater biofilms i.e. (i) the identification of Comamonadaceae as Ag NP-tolerant, (ii) a particular resilient behaviour of the biofilms, (iii) the two applied size fractions of Ag NPs exhibited similar effects independent of their sizes and their synthesis method, and (iv) bacterial biofilms show a high uptake capacity for Ag NPs, which indicates cumulative enrichment.

On-screen interactive presentations have got immense popularity in the domain of attentive interfaces recently. These attentive screens adapt their behavior according to the user's visual attention. This thesis aims to introduce an application that would enable these attentive interfaces to change their behavior not just according to the gaze data but also facial features and expressions. The modern era requires new ways of communications and publications for advertisement. These ads need to be more specific according to people's interests, age, and gender. When advertising, it's important to get a reaction from the user but not every user is interested in providing feedback. In such a context more, advance techniques are required that would collect user's feedback effortlessly. The main problem this thesis intends to resolve is, to apply advanced techniques of gaze and face recognition to collect data about user's reactions towards different ads being played on interactive screens. We aim to create an application that enables attentive screens to detect a person's facial features, expressions, and eye gaze. With eye gaze data we can determine the interests and with facial features, age and gender can be specified. All this information will help in optimizing the advertisements.

Molecular dynamics (MD) as a field of molecular modelling has great potential to revolutionize our knowledge and understanding of complex macromolecular structures. Its field of application is huge, reaching from computational chemistry and biology over material sciences to computer-aided drug design. This thesis on one hand provides insights into the underlying physical concepts of molecular dynamics simulations and how they are applied in the MD algorithm, and also briefly illustrates different approaches, as for instance the molecular mechanics and molecular quantum mechanics approaches. On the other hand an own all-atom MD algorithm is implemented utilizing and simplifying a version of the molecular mechanics based AMBER force field published by \big[\cite{cornell1995second}\big]. This simulation algorithm is then used to show by the example of oxytocin how individual energy terms of a force field function. As a result it has been observed, that applying the bond stretch forces alone caused the molecule to be compacted first in certain regions and then as a whole, and that with adding more energy terms the molecule got to move with increasing flexibility.

The underlying characteristics of blockchain can facilitate data provenance, data integrity, data security, and data management. It has the potential to transform the healthcare sector. Since the introduction of Bitcoin in the fintech industry, the blcockhain technology has been gaining a lot of traction and its purpose is not just limited to finance. This thesis highlights the inner workings of blockchain technology and its application areas with possible existing solutions. Blockchain could lay the path for a new revolution in conventional healthcare systems. We presented how individual sectors within the healthcare industry could use blockchain and what solution persists. Also, we have presented our own concept to improve the existing paper-based prescription management system which is based on Hyperledger framework. The results of this work suggest that healthcare can benefit from blockchain technology bringing in the new ways patients can be treated.

Forschungs- und Lehrbericht 2017/2018

Die Entwicklung von naturwissenschaftlichen Konzepten und Bildungssprache beginnt schon vor dem Schuleintritt und bildungssprachliche und naturwissenschaftliche Kompetenzen werden als wichtige Faktoren für Schulerfolg angesehen (Ehlich, Bredel & Reich, 2008; Saçkes, Trundle & Bell, 2013). Die frühe Förderung dieser Kompetenzen ist deshalb sinnvoll. Lernumgebungen, die naturwissenschaftliche Konzepte fördern (Hardy, Möller & Stern, 2006; Leuchter, Saalbach & Hardy, 2014), zeichnen sich ebenso wie Lernumgebungen, die Bildungssprache fördern (Gibbons, 2006; Quehl & Trapp, 2013), dadurch aus, dass sie zum Sammeln eigener Erfahrungen (z.B. beim Experimentieren) und zum Versprachlichen und Begründen eigener Gedanken anregen (z.B. in Planungs- und Reflexionsphasen). Die zur Förderung von Bildungssprache erforderliche sprachliche Komplexität wird besonders in Gesprächen herausgefordert, die außerhalb der Experimentiersituation, d.h. kontext-reduziert, stattfinden (Gibbons, 2006; Quehl & Trapp, 2013). Bisherige Forschung untersucht allerdings entweder sprachliche oder konzeptuelle Fortschritte und dies überwiegend im schulischen Kontext. Eine gemeinsame Betrachtung beider Bereiche bei Vorschulkindern fehlt bisher. Die zentrale Forschungsfrage der Arbeit lautet daher: „Welche Effekte haben kontext-reduzierte Gespräche auf Vorstellungen von Vorschulkindern zu zweiseitigen Hebeln und deren bildungssprachliche Lexik und Grammatik?“ Die Effekte kontext-reduzierter Gespräche wurden in einem quasi-experimentellen Design (N = 90) mit drei Gruppen untersucht. Alle Gruppen nahmen an Experimentierphasen zu zweiseitigen Hebeln teil. Zwei Gruppen erhielten außerdem Planungs- und Reflexionsphasen mit verbalen Unterstützungsmaßnahmen. In der kontext-reduzierten Bedingung fanden die Planungs- und Reflexionsgespräche in raum-zeitlicher Trennung zum Experimentiermaterial statt, in der kontextualisierten Bedingung stand den Kindern das Material auch während der Planungs- und Reflexionsphasen zur Verfügung. Zwischen kontext-reduzierten und kontextualisierten Gesprächen konnten weder signifikante Unterschiede im naturwissenschaftlichen Konzept noch in den bildungssprachlichen Kompetenzen gefunden werden. Ein signifikanter Fördereffekt von Planungs- und Reflexionsgesprächen gegenüber der reinen Experimentierphase ohne Gespräche zeigt sich für konzeptuelle Vorstellungen zu zweiseitigen Hebeln, jedoch nicht für bildungssprachliche Lexik und Grammatik. Diese Ergebnisse lassen sich aus dem theoretischen Hintergrund nur bedingt erklären und geben Anlass für weitere Forschung.

Engineered inorganic nanoparticles (EINPs) are produced and utilized on a large scale and will end up in surface waters. Once in surface waters, EINPs are subjected to transformations induced by environmental processes altering the particles’ fate and inherent toxicity. UV irradiation of photoactive EINPs is defined as one effect-inducing pathway, leading to the formation of reactive oxygen species (ROS), increasing EINP toxicity by exerting oxidative stress in aquatic life. Simultaneously, UV irradiation of photoactive EINP alters the toxicity of co-occurring micropollutants (e.g. pesticides) by affecting their degradation. The presence of natural organic matter (NOM) reduces the agglomeration and sedimentation of EINPs, extending the exposure of pelagic species, while delaying the exposure of benthic species living in and on the sediment, which is suggested as final sink for EINPs. However, the joint impact of NOM and UV irradiation on EINP-induced toxicity, but also EINP-induced degradation of micropollutants, and the resulting risk for aquatic biota, is poorly understood. Although potential effects of EINPs on benthic species are increasingly investigated, the importance of exposure pathways (waterborne or dietary) is unclear, along with the reciprocal pathway of EINPs, i.e. the transport back from aquatic to terrestrial ecosystems. Therefore, this thesis investigates: (i) how the presence of NOM affects the UV-induced toxicity of the model EINP titanium dioxide (nTiO2) on the pelagic organism Daphnia magna, (ii) to which extent UV irradiation of nTiO2 in the presence and absence of NOM modifies the toxicity of six selected pesticides in D. magna, (iii) potential exposure pathway dependent effects of nTiO2 and silver (nAg) EINPs on the benthic organism Gammarus fossarum, and (iv) the transport of nTiO2 and gold EINPs (nAu) via the merolimnic aquatic insect Chaetopteryx villosa back to terrestrial ecosystems. nTiO2 toxicity in D. magna increased up to 280-fold in the presence of UV light, and was mitigated by NOM up to 12-fold. Depending on the pesticide, UV irradiation of nTiO2 reduced but also enhanced pesticide toxicity, by (i) more efficient pesticide degradation, and presumably (ii) formation of toxic by-products, respectively. Likewise, NOM reduced and increased pesticide toxicity, induced by (i) protection of D. magna against locally acting ROS, and (ii) mitigation of pesticide degradation, respectively. Gammarus’ energy assimilation was significantly affected by both EINPs, however, with distinct variation in direction and pathway dependence between nTiO2 and nAg. EINP presence delayed C. villosa emergence by up to 30 days, and revealed up to 40% reduced lipid reserves, while the organisms carried substantial amounts of nAu (~1.5 ng/mg), and nTiO2 (up to 2.7 ng/mg). This thesis shows, that moving test conditions of EINPs towards a more field-relevant approach, meaningfully modifies the risk of EINPs for aquatic organisms. Thereby, more efforts need to be made to understand the relative importance of EINP exposure pathways, especially since a transferability between different types of EINPs may not be given. When considering typically applied risk assessment factors, adverse effects on aquatic systems might already be expected at currently predicted environmental EINP concentrations in the low ng-µg/L range.

Nowadays, almost any IT system involves personal data processing. In such systems, many privacy risks arise when privacy concerns are not properly addressed from the early phases of the system design. The General Data Protection Regulation (GDPR) prescribes the Privacy by Design (PbD) principle. As its core, PbD obliges protecting personal data from the onset of the system development, by effectively integrating appropriate privacy controls into the design. To operationalize the concept of PbD, a set of challenges emerges: First, we need a basis to define privacy concerns. Without such a basis, we are not able to verify whether personal data processing is authorized. Second, we need to identify where precisely in a system, the controls have to be applied. This calls for system analysis concerning privacy concerns. Third, with a view to selecting and integrating appropriate controls, based on the results of system analysis, a mechanism to identify the privacy risks is required. Mitigating privacy risks is at the core of the PbD principle. Fourth, choosing and integrating appropriate controls into a system are complex tasks that besides risks, have to consider potential interrelations among privacy controls and the costs of the controls. This thesis introduces a model-based privacy by design methodology to handle the above challenges. Our methodology relies on a precise definition of privacy concerns and comprises three sub-methodologies: model-based privacy analysis, modelbased privacy impact assessment and privacy-enhanced system design modeling. First, we introduce a definition of privacy preferences, which provides a basis to specify privacy concerns and to verify whether personal data processing is authorized. Second, we present a model-based methodology to analyze a system model. The results of this analysis denote a set of privacy design violations. Third, taking into account the results of privacy analysis, we introduce a model-based privacy impact assessment methodology to identify concrete privacy risks in a system model. Fourth, concerning the risks, and taking into account the interrelations and the costs of the controls, we propose a methodology to select appropriate controls and integrate them into a system design. Using various practical case studies, we evaluate our concepts, showing a promising outlook on the applicability of our methodology in real-world settings.